RAW Piston

RAW Piston Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from RAW Piston, Car dealership, Tali office Road, Dhaka.

শরীফ মেলামাইন 320mm Front Disk 😂😂
01/03/2025

শরীফ মেলামাইন 320mm Front Disk

😂😂

আমরা অনেকেই অনলাইন এ গাড়ির হেড লাইট, ফগ লাইট ইত্যাদি অর্ডার করি। বিপত্তি বাধে তখন যখন কোন ধরনের লাইট এর কানেক্টর আমার গা...
10/02/2025

আমরা অনেকেই অনলাইন এ গাড়ির হেড লাইট, ফগ লাইট ইত্যাদি অর্ডার করি। বিপত্তি বাধে তখন যখন কোন ধরনের লাইট এর কানেক্টর আমার গাড়িতে আছে, তা বুঝতে না পারি...

আজকের পোস্ট:

গাড়ির হেডলাইট বাল্ব ও কানেক্টরের গাইড: কীভাবে সঠিকটি বেছে নেবেন?

হেডলাইট গাড়ি চালানোর সময় নিরাপত্তার জন্য অত্যন্ত গুরুত্বপূর্ণ। প্রতিটি গাড়ির জন্য নির্দিষ্ট ধরনের বাল্ব ও কানেক্টর ব্যবহৃত হয়। তাই পরিবর্তনের আগে সঠিকটি বেছে নেওয়া জরুরি।

✨ সাধারণ হেডলাইট বাল্বের ধরন:
🔹 H1 – সাধারণত হাই বিম বা ফগ লাইটে ব্যবহৃত হয় (সিঙ্গেল ফিলামেন্ট)।
🔹 H4 – লো ও হাই বিম উভয়েই ব্যবহার হয় (ডুয়াল ফিলামেন্ট)।
🔹 H7 – লো বা হাই বিমের জন্য ব্যবহৃত হয় (সিঙ্গেল ফিলামেন্ট)।
🔹 9005 (HB3) / 9006 (HB4) – 9005 সাধারণত হাই বিমের জন্য, 9006 লো বিমের জন্য।
🔹 H11 – ফগ লাইট বা লো বিমে ব্যবহৃত হয়।

🔌 সঠিক কানেক্টর নির্বাচন:

প্রতিটি বাল্বের জন্য নির্দিষ্ট কানেক্টর থাকে। যেমন,
H4 বাল্ব → H4 কানেক্টর,
H11 বাল্ব → H11 কানেক্টর।
তাই পরিবর্তনের সময় মিলিয়ে নিতে হবে।

🛠 **বাল্ব পরিবর্তনের সময় করণীয়:
✅ গাড়ির ম্যানুয়াল বা বিদ্যমান বাল্ব দেখে সঠিকটি নিশ্চিত করুন। অবশ্য ই খুব বেশি ওয়াটের লাগাবেন না, ফিউজ পুড়ে দুর্ঘটনা ঘটতে পারে৷
✅ হ্যালোজেন বাল্বের কাঁচে হাত দেবেন না, এতে বাল্ব দ্রুত নষ্ট হতে পারে।
✅ ইনস্টলেশনের পর হেডলাইট জ্বালিয়ে টেস্ট করুন।

💡 হ্যালোজেন নাকি এলইডি?
✔ LED – উজ্জ্বল আলো, দীর্ঘস্থায়ী, কম বিদ্যুৎ খরচ।
✔ Halogen – সস্তা, তবে দ্রুত নষ্ট হয়।

🔥 শেষ কথা:

সঠিক বাল্ব ও কানেক্টর ব্যবহার করা নিরাপত্তার জন্য জরুরি। কমদামের জন্য মানহীন পণ্য এড়িয়ে চলুন এবং গাড়ির প্রস্তুতকারকের ম্যানুয়াল মেনে চলুন।

আপনার গাড়ির হেডলাইটের অভিজ্ঞতা কেমন? এই পোস্ট এর মাধ্যমে কি উপকৃত হলেন?

কমেন্টে জানান! 🚗💡

📌 Here are the main parts of a car engine with brief descriptions:1. Cylinder Block: The main structure of the engine th...
17/11/2024

📌 Here are the main parts of a car engine with brief descriptions:

1. Cylinder Block: The main structure of the engine that houses the cylinders, pistons, and crankshaft.

2. Cylinder Head: Sits on top of the cylinder block and contains the camshaft, valves, and spark plugs.

3. Piston: Moves up and down within the cylinder to convert fuel energy into mechanical power.

4. Crankshaft: Converts the up-and-down motion of the pistons into rotational motion.

5. Camshaft: Controls the opening and closing of the engine's intake and exhaust valves.

6. Timing Belt/Chain: Synchronizes the rotation of the crankshaft and camshaft for proper valve timing.

7. Spark Plug: Ignites the air-fuel mixture in the cylinder for combustion (in gasoline engines).

8. Fuel Injector: Delivers fuel into the combustion chamber for ignition.

9.Intake Manifold: Distributes the air-fuel mixture or air to the cylinders.

10. Exhaust Manifold: Collects exhaust gases from the cylinders and directs them to the exhaust system.

11. Oil Pan: Stores engine oil at the bottom of the engine.

12. Radiator: Helps cool the engine by dissipating heat from the coolant.

13. Alternator: Provides electrical power and charges the car battery while the engine is running.

14. Water Pump: Circulates coolant throughout the engine to regulate temperature.

15. Air Filter: Cleans the air entering the engine to prevent debris from damaging internal components.

16. Throttle Body: Controls the amount of air entering the engine based on the driver's input.

17. Oil Filter: Removes impurities from the engine oil to keep it clean.

18. Turbocharger (if applicable): Increases engine power by forcing more air into the combustion chamber.

Celebrating my 1st year on Facebook. Thank you for your continuing support. I could never have made it without you. 🙏🤗🎉
16/11/2024

Celebrating my 1st year on Facebook. Thank you for your continuing support. I could never have made it without you. 🙏🤗🎉

07/11/2024
📌 Here are the Different Types of Sensors used in Vehicles:1. Mass Air Flow Sensor:A mass (air) flow sensor (MAF) is a s...
31/10/2024

📌 Here are the Different Types of Sensors used in Vehicles:

1. Mass Air Flow Sensor:

A mass (air) flow sensor (MAF) is a sensor used to determine the mass flow rate of air entering a fuel-injected internal combustion engine.

2. Throttle Position Sensor:

A throttle position sensor is a sensor used to monitor the throttle body valve position for the ECU of an engine. The sensor is usually located on the butterfly spindle/shaft so that it can directly monitor the position of the throttle.

3. Oxygen Sensor:

An oxygen sensor, also known as an O2 sensor or lambda sensor, is a device that measures the amount of oxygen in a car's exhaust gas and helps the engine run efficiently.

4. Engine Knock Sensor:

The knock sensor is located on the outside of the engine block. It is intended to record knocking noise in all engine operating states to prevent engine damage.

5. Camshaft Position Sensor:

A camshaft position sensor is a vital component of a car's engine that measures the camshaft's position and rotation and sends this information to the engine control module (ECM).

6. Coolant Temperature Sensor:

A coolant temperature sensor (CTS) (also known as an ECT sensor or ECTS (engine coolant temperature sensor) is used to measure the temperature of the coolant/antifreeze mix in the cooling system, giving an indication of how much heat the engine is giving off.

7. NOx Sensor:

NOx sensors monitor the level of nitrogen oxide emitted by a diesel vehicle to ensure compliance with emissions regulations.

8. Manifold Absolute Pressure Sensor:

A manifold absolute pressure (MAP) sensor measures the pressure or vacuum in a car's intake manifold and provides information to the engine's electronic control unit (ECU).

স্পার্ক প্লাগ এর মাধ্যমে ইঞ্জিনের অবস্থা চেক করুন1- ভালো অবস্থা২- পিস্টনে সমস্যা থাকায় তেল দিয়ে সঞ্চারিত3- নতুন স্পার্...
24/10/2024

স্পার্ক প্লাগ এর মাধ্যমে ইঞ্জিনের অবস্থা চেক করুন

1- ভালো অবস্থা

২- পিস্টনে সমস্যা থাকায় তেল দিয়ে সঞ্চারিত

3- নতুন স্পার্ক প্লাগ মধ্যে (গ্যাপ) নিয়ন্ত্রণ করা প্রয়োজন

4- প্রমাণ যে স্পার্ক প্লাগ দীর্ঘ সময়ের জন্য পরিবর্তন করা হয়নি এবং অবিলম্বে পরিবর্তন করা প্রয়োজন

৫- জ্বালানী উচ্চ শতাংশ সীসা থাকায় সীসা সঙ্গে সম্পৃক্ত

6- দুর্বল জ্বলনের কারণে কার্বন দ্বারা সম্পৃক্ত, জ্বালানী পাম্প এবং বায়ু ফিল্টার পরীক্ষা করা প্রয়োজন

৭- ইঞ্জিনের তাপমাত্রা স্বাভাবিক হারের চেয়ে বৃদ্ধি পাচ্ছে, এবং তাই আমরা সিস্টেম চেক করি

৮- জ্বালানির ধরণ পরিবর্তন করতে হবে (যেমন, ৮০ পেট্রোলের পরিবর্তে, ৯০ বা ৯২ পেট্রোলের) অথবা ভালভ পরিবর্তন করতে হবে যদি এটি অল্প সময়ের মধ্যে ঘটে (কম কিলোমিটার)

৯- জ্বলন চেম্বারে যান্ত্রিক সমস্যা বা বিদেশী শরীরের প্রমাণ

23/10/2024
Pulser 150Bike is in good condition Model 200310 year registration
06/10/2024

Pulser 150
Bike is in good condition
Model 2003
10 year registration

😂😂😂😂
14/09/2024

😂😂😂😂

Alhamdulillah SOLD
04/09/2024

Alhamdulillah

SOLD

Address

Tali Office Road
Dhaka

Telephone

+8801707974987

Website

Alerts

Be the first to know and let us send you an email when RAW Piston posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share