Finixa Australia

Finixa Australia Finixa products and services help repair cars to the highest global standards while improving produc

🔧 One wipe. Zero contamination. Perfect finish.Before that gun even touches the panel, your surface prep makes or breaks...
27/08/2026

🔧 One wipe. Zero contamination. Perfect finish.
Before that gun even touches the panel, your surface prep makes or breaks the job. Finixa SOF20 Turquoise Degreasing Cloths are engineered to lift oils, silicones, and residues WITHOUT leaving lint or fibres behind, because one missed contaminant means fisheyes, poor adhesion, and a comeback job nobody wants.

✅ Lint-free for a flawless topcoat
✅ Highly absorbent for fast, thorough degreasing
✅ Colour-coded turquoise so your team never mixes up prep stages
✅ Consistent results, panel after panel

🧽 Contamination is the #1 cause of paint defects. Are you leaving it to chance?One missed trace of silicone, oil, or gr...
25/08/2026

🧽 Contamination is the #1 cause of paint defects. Are you leaving it to chance?
One missed trace of silicone, oil, or grease can mean fisheyes, poor adhesion, and a comeback job that costs you time and money. Finixa SCR100 Impregnated Cleaning Cloths take the guesswork out of surface prep, pre-soaked, ready to grab, and formulated to lift contaminants fast before primer or basecoat goes down.

✅ Consistent clean, every panel, every time
✅ No mixing, no mess, no wasted degreaser
✅ Faster prep = faster turnaround
✅ Fewer comebacks = better bottom line

🔧 The 20-second fix that keeps your bay moving.Cracked trim clip? Loose emblem? Broken plastic tab? Don't wait on parts ...
23/08/2026

🔧 The 20-second fix that keeps your bay moving.
Cracked trim clip? Loose emblem? Broken plastic tab? Don't wait on parts or reach for the epoxy, the Finixa IAG20 Instant Adhesive Gel bonds metals, plastics, wood, leather and fabric in seconds, holding firm in 15-30 seconds flat.

✅ Medium-viscosity gel, no drips, no mess, precise application
✅ Cures at room temp, no heat gun, no curing oven
✅ Versatile bond across almost every substrate on and off the car
✅ OEM-grade reliability, panel-shop practicality

20/08/2026

Dust is the enemy of a flawless finish. 🎯
One missed speck under a fresh coat can mean re-doing the whole panel. Finixa Tack Rags (TAK00 & TAK01) grab dust, lint and debris before they ruin your paintwork, giving you a clean, contaminant-free surface every single time.

✅ Removes fine dust & particles instantly
✅ Non-linting, residue-free wipe
✅ Cheap insurance against costly rework
✅ Essential final step before primer, basecoat & clearcoat

💨 Stop waiting on wet paint. Start blasting it dry. 💨The Finixa Windjet (WJE05) delivers a high-performance flat jet of ...
18/08/2026

💨 Stop waiting on wet paint. Start blasting it dry. 💨
The Finixa Windjet (WJE05) delivers a high-performance flat jet of compressed air, built to cool, dry and clean by hand or in a fixed setup. For spot repairs on water-based paint, that means less time standing around and more cars back on the road.

✅ Speeds up dry time on water-based spot repairs
✅ Durable ABS nozzle built for daily workshop use
✅ Flat jet design covers more surface, faster than a standard air gun
✅ Doubles as a cleaning & cooling tool around the shop

🔧 Stop propping panels against the wall.The Finixa EQU 52 Wheel & Panel Stand keeps your workshop moving, and your paint...
16/08/2026

🔧 Stop propping panels against the wall.
The Finixa EQU 52 Wheel & Panel Stand keeps your workshop moving, and your paint jobs protected.

✅ Holds up to 4 alloy wheels on rotating cones for full 360° access when painting or polishing
✅ Foam-cushioned supports protect freshly painted panels from chips and scratches
✅ Removable wheel supports adapt the stand for larger panels like hoods and bonnets
✅ Rated to 100kg, galvanised steel build, made to handle daily bodyshop traffic
✅ Compacts down to 91 x 70 x 15cm for easy storage between jobs

🧴 End-of-day hands shouldn't tell the story of your workday.Paint, glue, oil, grease. Finixa HCL3000 Hand Cleaner cuts t...
13/08/2026

🧴 End-of-day hands shouldn't tell the story of your workday.

Paint, glue, oil, grease. Finixa HCL3000 Hand Cleaner cuts through it all in one wash. It's tough on solvent and water-based paint residue, yet gentle enough to use every day, with added moisturiser and an aloe vera-based hand nutrient that keeps skin from drying out and cracking under constant exposure.

Biodegradable and bodyshop-tough, because looking after your hands shouldn't mean compromising on cleaning power. Keep a pump station at every workstation and make it part of the daily routine.

👉 Ask your Finixa distributor about adding HCL3000 to your shop.

🎨 Stop guessing. Start matching.Every colour match starts with an accurate spray-out card, but air-drying takes time you...
11/08/2026

🎨 Stop guessing. Start matching.
Every colour match starts with an accurate spray-out card, but air-drying takes time you don't have. The Finixa ILO20 Spray Out Card Drying Oven cuts drying time down to minutes, so your team can confirm the perfect match before the job even hits the booth.

✅ Faster colour confirmation = faster turnaround
✅ Reduce comebacks from inaccurate matches
✅ Keep your workflow moving, not waiting

A few minutes in the ILO20 saves hours of rework down the line. Because in a bodyshop, time is money, and colour accuracy is everything.

📩 Get yours through your local distributor today.

🔧 Stop waiting. Start sanding.One coat. One step. Zero mixing. That's TSP1500 One-Step UV Primer/Filler.Why it matters f...
09/08/2026

🔧 Stop waiting. Start sanding.
One coat. One step. Zero mixing. That's TSP1500 One-Step UV Primer/Filler.

Why it matters for your shop: every minute a panel sits waiting to dry is a minute it's not moving through your bay. TSP1500 turns primer/filler into a true spot-repair tool, perfect for smart repair jobs on steel, aluminium, galvanised steel, OE finishes, and hard plastics.

⚡ 20-second flash off (down from 2 minutes)
💡 Cures in 1-2 minutes under UV lamp
🚫 No mixing, no cleanup, no wasted product
✅ Sand immediately after curing

⚡ Why wait 24 hours when you can cure in seconds?The Finixa UVL00 UV Curing Lamp is changing the game for bodyshops that...
06/08/2026

⚡ Why wait 24 hours when you can cure in seconds?
The Finixa UVL00 UV Curing Lamp is changing the game for bodyshops that value speed and precision.

✅ Super-fast curing – no more downtime waiting on 2K products to harden
✅ UV-A only (395nm) – no UV-B or UV-C, so curing stays safe and controlled
✅ Built-in cooling + ultrasonic distance sensor – consistent output every time
✅ Wall-mounted charging station – always ready to go, no cord tangles in your bay
✅ Works with fillers, primers, clear coats, resins & adhesives – one lamp, one workflow

📞 Contact your local supplier about adding UV curing to your workflow.

Address

27 Hallstrom Place
Wetherill Park, NSW

Opening Hours

Monday 8am - 4:30pm
Tuesday 8am - 4:30pm
Wednesday 8am - 4:30pm
Thursday 8am - 4:30pm
Friday 8am - 4:30pm

Telephone

+61280368210

Website

Alerts

Be the first to know and let us send you an email when Finixa Australia posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Finixa Australia:

Shortcuts

Share

Category