Evolution X Design

Evolution X Design Evolution X Design started out designing & manufacturing coil covers for the Evo X's 4B11T. Evolving, continuing to add new products and vehicles to our range.

Bringing quality products to life.

F150 Molle panels!Instock and ready to go!Molle panels available for both left and right side of the tub. Left side avai...
15/05/2026

F150 Molle panels!

Instock and ready to go!

Molle panels available for both left and right side of the tub.

Left side available for variants with tub power and without!

Maintains access to hold downs and tub lighting.

The tub power protection panel! Designed to protect the cig socket and the plug from loose items in the tub! This is designed to suit the OEM power panel on the AUS delivered F150, enough clearance to insert a plug and protect it from harm!

Power protection - $150 AUD

Power panel - $35 AUD

LHS or RHS Molle panel - $250 AUD

I’ll do a discount for the full kit down to $410 AUD

These prices are for raw aluminium and without any electrical components. I can link you the cig/anderson panels to order.

Power protection and Molle panels!I’m finally happy with the latest products for the F150!Firstly! The tub power protect...
04/04/2026

Power protection and Molle panels!

I’m finally happy with the latest products for the F150!

Firstly! The tub power protection panel! Designed to protect the cig socket and the plug from loose items in the tub! This is designed to suit the OEM power panel on the AUS delivered F150, enough clearance to insert a plug and protect it from harm!

Second! I wanted to add a dual battery! So I have designed a replacement panel which will accept the itech world (and others of similar size) DCDC charger! Also designed to suit cig/anderson panels. Allowing for a convenient way to have cig and Anderson power output from your second batter in the tub! I used the second Anderson for adding a solar blanket!

Lastly! LHS molle panel! Allowing access to the tub lighting and hold downs too!

I will be looking to do a fabrication run of these soon so if you are keen get your orders in!

Power protection - $150 AUD

Power panel - $35 AUD

LHS Molle panel - $250 AUD

I’ll do a discount for the full kit down to $410 AUD

These prices are for raw aluminium and without any electrical components. I can link you the cig/anderson panels to order. I will be making a full molle panel available for the people without the power panel too! RHS to come very shortly!

I have been designing and making various parts for over 12yrs now! Finally getting stuck into the F150! Video of installing the MK1 power protection panel https://youtu.be/doeG2R9OcfE?si=8xKNJ2GsCIPhs57t

And DONE! Behind the grill lighting brackets!Just finished fit testing our new behind the grill F150 lighting brackets! ...
03/04/2026

And DONE! Behind the grill lighting brackets!

Just finished fit testing our new behind the grill F150 lighting brackets!

These are designed to suit a wide variety of light bars or spot lights!

3mm 304 SS

Adjustable 8mm mounting slots

Height adjustable (to get the perfect alignment!)

Get pre orders in now! These will be going into production very soon.

Raw finish for just $260 AUD

Install video will be available soon!

Evolution X Design

Our new Nexus 3 ECU bracket installed in monster Evo X!These brackets are now available for the following ECU’s:Halte...
20/11/2025

Our new Nexus 3 ECU bracket installed in monster Evo X!
These brackets are now available for the following ECU’s:
Haltech Nexus range
Link G4X range
Reach out if you have a different ECU and would like a bracket made!
https://youtu.be/ohj_RAYALx4?si=n4-hQkbBsQEBJLue

**New Product**Do you have an aftermarket ECU and need a mounting bracket?? Our new Evo X ECU mounting brackets are here...
24/10/2025

**New Product**

Do you have an aftermarket ECU and need a mounting bracket?? Our new Evo X ECU mounting brackets are here.
Due to our need to mount our aftermarket ECU we have designed a solution for those who have gone to an aftermarket ECU and do not have a mounting bracket.
Secure your ECU with our mounting bracket!
Currently available for
Link G4X - $85 AUD
Haltec Nexus S3 - $85 AUD
Early Powertune adaptor box - $110 AUD
Check out then design process on YouTube

https://youtu.be/ohj_RAYALx4?si=n4-hQkbBsQEBJLue

** NEW PRODUCT ** Moving further into the 3D printed parts world we now have available our EXD ashtray pod for Evo X!Sui...
28/03/2025

** NEW PRODUCT **
Moving further into the 3D printed parts world we now have available our EXD ashtray pod for Evo X!
Suitable for 52mm or 2” gauges this new pod simply mounts to where the factory ashtray is in your Evo X giving you a space for a discretely placed gauge.
$90AUD
Available through the AK RACING website https://www.akracing.com.au/product/exd-evo-x-52mm-gauge-pod/

** NEW PRODUCT ** Moving further into the 3D printed parts world we now have available our EXD ashtray pod for Evo 7-9!S...
25/03/2025

** NEW PRODUCT **
Moving further into the 3D printed parts world we now have available our EXD ashtray pod for Evo 7-9!
Suitable for 52mm or 2” gauges this new pod simply mounts to where the factory ashtray is in your Evo 7-9 giving you a space for a discretely placed gauge.
$80AUD
Available through the AK RACING website https://www.akracing.com.au/product/exd-evo-7-9-52mm-gauge-pod/

*** New Product release *** EXD 3D printed “road flare” which is able to house a P5R touch (potential others) or put wh...
23/10/2023

*** New Product release ***
EXD 3D printed “road flare” which is able to house a P5R touch (potential others) or put what you will in there! 😉
$20AUD plus shipping!
These will be available on the AK Racing website shortly.

https://www.akracing.com.au/product/exd-road-flare/


PDS - these are 3D printed parts and should not be left in direct sunlight or exposed to extreme heat. Novelty item only.

Address

21 Lathe St
Virginia, QLD
4014

Website

Alerts

Be the first to know and let us send you an email when Evolution X Design posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category