MechFab Industries

MechFab Industries MechFab Industries provides top quality fabrication and mechanical needs for your 4x4

Full turbo back system for one of our sas'd N70's!!. 3" dump into 4" system.
16/01/2025

Full turbo back system for one of our sas'd N70's!!. 3" dump into 4" system.

Intercooler pipes for a bmw m57 conversion.
16/01/2025

Intercooler pipes for a bmw m57 conversion.

1 down 2 to go . Tidy gq out the door after fitting an fg motor to the patrol 5spd box. After countless hours repairing ...
05/12/2023

1 down 2 to go . Tidy gq out the door after fitting an fg motor to the patrol 5spd box. After countless hours repairing a harness supplied can finally say its all sorted and time for the owner to enjoy driving the big girl again. While it was in we also fitted up new suspension to revive the old sagged out coils and worn shocks..

Id like to add please be patient with replies and communication atm we are swamped with jobs and making our way through them all as fast as we can so we appreciate your understanding as we to have families we would like to go home to each day.

After close to 6 months since the first design was made, between other jobs and multiple reiterations we have our finish...
17/11/2023

After close to 6 months since the first design was made, between other jobs and multiple reiterations we have our finished 1KD-FTV rear sump ready to go.

This gives more clearance for the solid axle swaps both for the diff housing, the draglink, a tightly packaged steering damper or a crossover brace between the rails.

We will be able to offer these shortly, fully TIG welded whilst bolted to a fixture plate to ensure they stay dead flat and seal perfectly on the first go.

The rear sump does require a modified pickup, which we will be offering on an exchange basis only with your factory KD pickup.

This sump also allows for use of the factory “wings” that bolt from the bellhousing to the side of the block, which are absolutely required with the heavier boxes many people are converting to now adapted to the stock bellhousing.

We also will have the option for flipped or non-flipped diffs, this simply changes what side the angled relief the upper section of the sump is on.

Shoot us a message through instagram or Facebook to be put on the list to be first to know when they’re ready to go!

Patrol coil tower repair and brace kit almost ready to be released, with this kit multiple options are available to acco...
17/08/2023

Patrol coil tower repair and brace kit almost ready to be released, with this kit multiple options are available to accommodate the extent of repair or preventative measures required.

- options will be updated and finalised closer to release date.

Also have a few other stuff in the works almost ready to drop, (hence the lack of posts lately)

Also please keep in mind that Mechfab is ran by one person with only so many hours in the day unfortunately some times it does take a toll on communication please be aware that im trying everything i can to keep ontop of msgs when possible.

SASd RC Colorado from a while back with an 80 series front diff/steering box in for some new goodies! Spring over axle r...
16/12/2022

SASd RC Colorado from a while back with an 80 series front diff/steering box in for some new goodies!

Spring over axle rear end with standard N70 leaf/shackle (relocated hanger for optimal shackle angle and redrilled/overlayed front leaf mount for desired angle of the pack) along with a weld in inversion bar, our universal lower shock mounts and some Superior Engineering shocks.

Fully engineered in NSW 💪 spring over swaps can be done, if they're done properly, this setup matches the ride height of the old leaf under axle setup with the previously installed soft ride shackles, how's the clearance under the rear diff now 😎

80/105 Landcruiser Front Long Arm We had a fair bit of interest in these when we posted up about fitting them to a custo...
22/10/2022

80/105 Landcruiser Front Long Arm

We had a fair bit of interest in these when we posted up about fitting them to a customers car, so they're now live on the website.

Again this is a weld in kit, the surrounding holes in the chassis aren't strong enough to mount suspension

More info can be found in our earlier posts or on the product page on the website.

We have decided to do the arms at a discounted price to a limited amount of customers, $2400 Inc GST, In-house fitment can be arranged at a cost.

We currently have it set up so you can either pay in full, or place a 50% up front deposit, this is due to our lead time on production, once your kit is ready for dispatch, the other 50% is required to get it sent out to you.

Link to the product on our site : https://mechfabind.com.au/products/80-105-front-long-arm-kit

Cycling up the dual triangulated N70 Hilux 4 link went well in CAD, even better in real life.Now to finalise some pricin...
22/10/2022

Cycling up the dual triangulated N70 Hilux 4 link went well in CAD, even better in real life.

Now to finalise some pricing and it will be available on https://mechfabind.com.au/ for sale.

Coilover options and coil + shock available, suit GQ and GU (Y60/Y61) patrol rear diff. N70 rear housing truss available upon request for the people clearance concerned.

Solid 2" 7075 aluminium uppers and lowers in this one for a bit of overkill with 1.25" 3 piece Heim joints and cruiser bush forged housings, we will be using 1.5" uppers in any of our in-house installs (unless otherwise requested by customer)

For reference that's the links clearing at 12" of uptravel from 3" taller then standard ride height, with less then 4.5 degrees of pinion roll and sub 1 degree of roll steer at full articulation (measured relative to a 16" coilover/shock)

Wow its been a while since any updates on the SAS jobs from the amount of projects happening atm but this lil beauty was...
19/10/2022

Wow its been a while since any updates on the SAS jobs from the amount of projects happening atm but this lil beauty was finished up not long ago out the door rolling on gu diffs front an rear, the typical fruit of 12inch coilovers set of our long radius arms still fitted with keaf springs in the rear, feel free to contact us for any questions or any quotes

Well can let the cat out the bag, 80 series long radius arms fitted up to be tested out.. these arms are 300mm longer th...
16/10/2022

Well can let the cat out the bag, 80 series long radius arms fitted up to be tested out.. these arms are 300mm longer than factory (currently only have arms drawn up for 4"lift other heights will available soon). This kit is fully self locating to a manual vehicle (auto guys feel free to contact us first to discuss options) and easy to install replacing the factory cross member. Price will be determined this week hopefully and will be available to purchase the following week.

Ohhhhh cant wait to let this cat out the bag..Been long time in the making...
10/10/2022

Ohhhhh cant wait to let this cat out the bag..
Been long time in the making...

After multiple revisions throughout prior months, I am pleased to announce one of our very first DIY SAS kits is making ...
18/09/2022

After multiple revisions throughout prior months, I am pleased to announce one of our very first DIY SAS kits is making its way out the door. (Note Radius arms and a few other brackets not pictured)

Currently awaiting customer feedback for any final revisions that may be required to guarantee a buttery smooth installation into everyone's N70s.

Stay tuned for future updates, pricing and options

Address

3/5 Grattior Place
Toronto, NSW
2283

Website

Alerts

Be the first to know and let us send you an email when MechFab Industries posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to MechFab Industries:

Shortcuts

Share

Category