Street King Engines

Street King Engines Performance Engine Building

Barra short block built and ready to goCarillo Pistons Spool I-Beam RodsEmpire Elite Main Cap GirdleARP Main Studs
03/06/2022

Barra short block built and ready to go
Carillo Pistons
Spool I-Beam Rods
Empire Elite Main Cap Girdle
ARP Main Studs

Abit of LS action lately.Left - Gen IV 6.0 iron block, billet crank, forged rods and pistons built for boost.Middle L98 ...
08/04/2022

Abit of LS action lately.

Left - Gen IV 6.0 iron block, billet crank, forged rods and pistons built for boost.

Middle L98 .25mm over pistons and cam kit.

Right LS1 standard reco shortblock.

Bit of a tuff one coming through at the moment.Solid roller Iron 6L with forged rods and pistons, fully counter weighted...
04/02/2022

Bit of a tuff one coming through at the moment.
Solid roller Iron 6L with forged rods and pistons, fully counter weighted callies crank and a more then generous cam.
Spinning to 8000+rpm this should be able to let the equipped GTX47 turbo do its thing.

RB25/30 complete and ready to turn some tyres!
16/01/2022

RB25/30 complete and ready to turn some tyres!

Bit of a different one on the bench today, RB25/30 for N.E Performance.This one will have everything needed shred tyres ...
02/12/2021

Bit of a different one on the bench today, RB25/30 for N.E Performance.

This one will have everything needed shred tyres at the track.
-Spool H-Beam rods
-Ross racing forged pistons
-ACL Race bearings
-ARP studs top and bottom
-Billet pump gears
-Bigger oil pump drive collar
-Cometic headgasket

1100hp Barra build all buttoned up ready to be sent off to its new home.-Ross Racing Forged Pistons-Trend H13 1/4" Wall ...
27/11/2021

1100hp Barra build all buttoned up ready to be sent off to its new home.

-Ross Racing Forged Pistons
-Trend H13 1/4" Wall Pins
-Spool I-Beam Connecting Rods
-Empire Elite Main Cap Girdle
-Empire Elite Chain Kit
-Empire Elite Billet Lower Sprocket
-ARP Main Studs
-Plazmaman Headstuds
-Cometic MLS Headgasket
-Boundary Billet Gears
-Billet Backing Plate
-Ross Race Series Balancer
-Crow Springs & Retainers
-ACL Race Bearings Throughout

Next build starting to come together, all clearances are now on point after making a few minor adjustments, now time for...
20/11/2021

Next build starting to come together, all clearances are now on point after making a few minor adjustments, now time for assembly.

900hp barra shipped off to Townsville 🚚
19/11/2021

900hp barra shipped off to Townsville 🚚

This one's ready to be sent off to its new home, time to move on to the next one👍
18/11/2021

This one's ready to be sent off to its new home, time to move on to the next one👍

Love it when the thrust bearing is perfect straight out of the box😍
18/11/2021

Love it when the thrust bearing is perfect straight out of the box😍

PLR Performance Engines Australia coming in with the awesome machinework as always!
14/11/2021

PLR Performance Engines Australia coming in with the awesome machinework as always!

Getting on the measure up for this Barra build for N.E Performance, This Barra will be kitted out with all the good stuf...
12/11/2021

Getting on the measure up for this Barra build for N.E Performance, This Barra will be kitted out with all the good stuff needed to make the rear tyres wish they were never fitted to the FG it's going in.

Address

Terranora, NSW

Website

Alerts

Be the first to know and let us send you an email when Street King Engines posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category