Matt’s Audio

13/04/2024

New Mazda / Ford Ranger PK PJ kit will be available soon.

This is the second tester we have produced & are seeking somone who would like to test this unit.
We’ve had a new chipset made & wanting to trial it out.

Kit is very easy to install & plug & play.
Making it user friendly.

If anyone local to Sydney wants to reach out & try this new version
It would be greatly appreciated.
You will receive a brand new unit after testing & returning this unit.

Cheers guys

19/04/2023

Hey all,

Just letting everyone know we are back from holidays.

If you would like to process an order for a Bluetooth kit or ICC patch harness, please inbox us.

There is currently stock of our FG Bluetooth Kits however BA/BF Bluetooth kits & ICC Patch Harness will need to be made up.

Please inbox us with any questions.

11/09/2022

We have a good amount of FG MK1 - MK2 patch looms available.

If youre looking to change your FG MK1 icc to an FG MK2 icc that has inbuilt Bluetooth, inbuilt NAV & many other features,
This is the patch loom you will require (along with a coding)

We can ship these Aus wide or overseas if required.
Pickup can be arranged aswell.

We accept Payment via a few options.
Paypal / Bank Tranfser / Payid / COD

If interested flick us an inbox.

29/07/2022

Just an update for the Ranger/Mazda Bluetooth kits.

Our test unit was a success & works exactly how we hoped. We are currently working with an external mob to assist us with a much needed component that makes this all possible.

We hope that we can get this sorted ASAP! & get these kits made & rolling out the door for everyone.

Please be patient with us, we will have a post as soon as kits are ready to go.
Thanks to everyone who flicked us a message & offered their support to test our kit in their vehicle. Really appreciated. & massive thanks to Barry Johnson for testing it for us.

Stay posted we’ll be back with updates :)

12/07/2022

** please note we are currently working with somone atm, hoping to have them available quite soon***

Update …
The kit may not be plug & play like our Falcon Bluetooth kits. But will require 1 spliced Acc wire.

We are looking for somone to test a prototype Mazda / Ford Bluetooth kit.
The kit would suit a large array of Mazda & also
PJ PK FORD Ranger
List below :
Mazda 2 2007-2014
Mazda 3 2004-2016
Mazda 6 2002-2014 GJ series 2
Mazda CX-7 2006-2009
Mazda MX5 2005-2013
Mazda RX8 2003-2010
Mazda BT50 2007-2011
Ford Ranger PJ PK 2006-2011

We are seeking somone who would like to test the unit in their car & supply us with some feedback on the kit. Each vehicle will have a different way to remove the headunit to locate the connector behind the radio.

Please inbox us & we’ll go from there.
We are based in Sydney so if your local that would be perfect.

Thanks

26/08/2021

FG ICC LOOMS

This loom allows you to install the FG MK2 ICC unit into your MK1 FG.

These looms are $250

The loom allows all your factory options to work
Bluetooth & factory mic & Reverse camera

If installing the FG mk2 icc & you want full control over your climate control a HIM module from MK2 should be installed with new ICC
The HIM module doesn't need to be changed but climate control won't function correctly unless you do so..
If you keep the mk1 him module you need the temp on L for max cold, anything above L is heater..
Problem with mk2 HIM is the outside temp displays incorrect in a mk1

Any questions or to order
Please don’t hesitate to inbox us.

25/08/2021

For any ICC needs or installs in an around Victoria.
Check out Barra Scan
FG MK2 ICC into FG MK1 (car has facelift)

19/08/2021

FG ICC LOOMS..

We will make ICC conversion looms
To allow you to install
FG MK2 ICC units into FG MK1 Vehicles..

These will be made to order only..

A price will be released next week.

01/08/2021

We will now be making plug & play Bluetooth kits to suit VE series 1 & 2 commodores.

Kit is completely plug & play,
Allowing both calls & music via the kit.
Having a power splitter allows you to keep your smokers pack cigarette lighter powered.

Connecting to factory connectors on the drivers side of the radio & below the radio
Easy accessible by removing a centre console trim.

Kit will also be supplied with a ground loop isolator to remove that factory buzz / whine.

Once all is connected simply set your radio to
REAR AUX & you’ll be able to stream music.

Kits will be $100
This includes free standard tracked postage aus wide
We do offer express post aswell for $13 Aus wide.

Inbox us with any questions or to place an order

02/07/2021

Moldz Volgz has recently recevied one of our new updates kits & gives a some feedback on it, also giving you a run down on call capabilities of the kit.

Go check his channel out
Plenty of good stuff on there

Including installation video of our Bluetooth kit..

Matt from Matts Audio sent me out an upgraded version of his already awesome bluetooth controller kit to try out. These kits replace the auxiliary output in...

02/07/2021

Hey guys,

So we’ve been asked a lot lately for headunit harness again & we’ve declined orders due to not being able to get the connectors needed for plug n play.

However we will most likely make these adaptors for peoples interested, this harness will allow you to install your headunit without cutting any wires,
Itll supply power to your headunit
12v / ACC / Ground

And your audio will go in via the AUX connector behind the fuse panel.

You would be responsible for connecting your headunits Iso harness to this harness, but as you can see we’ve attached labels to relate to the appropriate color.

If anyone is interested in one don’t hesitate to hit us up.

$45 express posted Aus wide

26/06/2021

Afternoon all,

We have finally recevied the final piece to the puzzle & have kits ready to go out.

We have a good amount of BA/BF/TERRITORY kits available ready to go.
FG kits are also available & ready to go now to

All kits are $100 posted aus wide with AUSPOST tracked satchel.
If you wish to get Express post this is an additional $12.

Feel free to inbox us with any questions you might have.