VIS Rotary

VIS Rotary VIS Rotary - Mazda Rotary Specialist Here at VIS Rotary, we are the Mazda rotary specialist. We also supply, wire and tune Microtech and Apexi Power FC ecu’s.

We maintain, service and modify all rotary powered vehicles to your needs. Specialising in FC / FD rx7’s and rx8’s (log book servicing and rebuilds) with over 10 years rotary experience. We can rebuild your engine from standard to full race spec, with all porting and dowelling done in-house and full engine balancing is available. Our work is always top quality with high attention to detail produci

ng some of Australia’s top show cars. We also offer full race setups preparation and support, turbo upgrades and fabrication work.

Pere has been driving the wheels off the little datto, attending 2wd roll racing making it deep into eliminations last w...
01/05/2026

Pere has been driving the wheels off the little datto, attending 2wd roll racing making it deep into eliminations last week then today drove from Canberra to Cootamundra raced all day at making it into the final in street class and then driving back to Canberra! Doesn’t end there though, now on the way up to Sydney to attend Power Play tomorrow.


Ahmeds neat rx3 came to us as a roller, we built a nice naturally aspirated package to drop in with a hilux box behind i...
19/04/2026

Ahmeds neat rx3 came to us as a roller, we built a nice naturally aspirated package to drop in with a hilux box behind it, plumbed up a new fuel system and put a Microtech EFI fuel only Ecu to control it, now off for the customer to do some run in Kms

Happy easter too everyone from VIS Rotary what nothing better then too show you hajis bright as a easteregg Rx2 out this...
04/04/2026

Happy easter too everyone from VIS Rotary what nothing better then too show you hajis bright as a easteregg Rx2 out this week it was in for a few little bits after doing some run in Kms. Completed a service and check over the whole car then we added some new Atomizer injectors and done a ratio change in the diff to pair better with the auto, lastly the strut brace went back on after chroming and we think it sets the bay off perfectly. As in vis style this car you can love it or hate it but you definatly aint going too miss it



Sams beutiful self built rx3 in for a run in tune and checkover  after  installing the 12a bridgy that we had freshened ...
01/04/2026

Sams beutiful self built rx3 in for a run in tune and checkover after installing the 12a bridgy that we had freshened up for him now he is ready too hit the streets and enjoy it

Well done too Zoran taking out king of jambo and best interior we built this car over 3 years ago and still number 1 Mot...
28/03/2026

Well done too Zoran taking out king of jambo and best interior we built this car over 3 years ago and still number 1
Motive Upholstery

FD Friday, we had this Rx7 in for a computer upgrade upon inspection the motor was lacking comp i so we rebuilt the moto...
27/03/2026

FD Friday, we had this Rx7 in for a computer upgrade upon inspection the motor was lacking comp i so we rebuilt the motor including a vis spec bridge port , installed a Haltech Elite Ecu and gave it a run in tune, now off to the owner to put some Kms on the fresh heart

Check out the new  look on our good friend Paul Matheson and lead mechanic Jake Mathesons iconic pig13b the og guys will...
24/03/2026

Check out the new look on our good friend Paul Matheson and lead mechanic Jake Mathesons iconic pig13b the og guys will rememember this car make sure u check it out at Jamboree this weekend its a pleasure too be involved in this car and credit too all involved

Omars rx3 come in after he fit the new haltech uc10 dash for us too check and a  major service and check over, we rectif...
24/03/2026

Omars rx3 come in after he fit the new haltech uc10 dash for us too check and a major service and check over, we rectified a few little components before we strapped her down and gave a tune, now ready for the customer to enjoy!

Johls tidy S2 came in for a few little upgrades, we upgraded the computer from the old  lt10s to the new  LT-10c V2 and ...
22/03/2026

Johls tidy S2 came in for a few little upgrades, we upgraded the computer from the old lt10s to the new LT-10c V2 and pressure sensor kit from our friends at Microtech EFI , Put a Haltech IC-7 dash in and gave it a service and check over before we put on the rollers to give it a Tune.

Peres Angry little  Datto made the trip up to Qld Rotary Revival and showed the sunny state how we do it taking home the...
21/03/2026

Peres Angry little Datto made the trip up to Qld Rotary Revival and showed the sunny state how we do it taking home the win for the off street racing, a massive effort from everyone involved to get the car up there.


Address

19 Graham Hills Road
Sydney, NSW
2567

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm
Saturday 8:30am - 2pm

Alerts

Be the first to know and let us send you an email when VIS Rotary posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to VIS Rotary:

Share