Connexion Concepts Group

06/05/2026

Connexion Concepts is closed today due to heath issues.
Please Email / DM Us and we will get back to you tomorrow.

26/04/2026

Nissan Skyline GTR: I recently traveled to Queensland to rewire the entire MoTeC System in GOKUI for Street Race Solutions . The project involved a comprehensive rewire of the powertrain, as well as the installation of a PDM15 to eliminate reliance on the factory body harness. Following the completion of the work, the vehicle was retuned and achieved 1200HP @ 40PSI. I will be returning to Queensland soon to prepare additional vehicles for the GTR Festival.

15/12/2025

21/11/2025

Connexion Concepts is proud to partner with Tuned By Shane T to provide a convenient local option for Australian customers to purchase the iconic “I’m a Dynocologist” shirt.

Current Sizes: L / XL / XXL and 3XL.

If you want a larger size please comment below

Available now through our online store:

🔗 https://www.connexionconcepts.com.au/shop/merchandise/tunedbyshanet-dynocologist

20/10/2025

Project Spotlight: Nathan’s AU Ford Fairlane

Stout 364 ci Windsor • Full MoTeC Integration • OEM System Compatibility

We’re handling the complete MoTeC installation on this AU Fairlane, integrating seamlessly with the factory electronics while giving it a serious performance upgrade.

The heart of the setup is a Drive-By-Wire ITB system, built around an EFI Hardware DBW motor and our own in-house machined adapter plate. The Morrison Motorsports ITBs have been re-engineered to simplify the linkage design — clean, efficient, and precise.

This car is sensor-heavy and runs one of our custom firmware packages, written specifically to control a Ford 4R75W transmission, transbrake, and dump valves — all through MoTeC.

Power comes from a N/A (🤫) 364 cube Windsor, fed by eight injectors and breathing through that wild ITB setup. We can’t wait to hear it roar to life.

The harness pictured is the passenger-side inner-guard harness, designed to integrate neatly with the OEM wiring. Despite supporting all the additional inputs and outputs, the entire assembly measures only 8.7 mm in diameter.

Next up: the engine harness, which will feature 99 conductors, routed through a Souriau connector, and will support eight individual NTK wideband sensors — a serious piece of wiring art in its own right.

14/10/2025

Our WeatherTrack Weather Station made an appearance with Cleetus McFarland , thanks to Devin Vanderhoof from HCR Innovations and our U.S. distributor SB Parts Direct 👏

The WeatherTrack connects natively over Holley CANBUS, making setup and integration into Holley EFI systems simple, flexible, and powerful 🔧🌦️

CAN Data Broadcast:
▪️ Water Grain (0–150 GPP)
▪️ Temperature (–40 to 85 °C)
▪️ Relative Humidity (0–100 %)
▪️ Pressure (30–110 kPa)
▪️ Density Altitude (–3000 to 9000 ft)
▪️ Temperature °F (–40 to 185 °F)
▪️ Pressure InHg (16–32 InHg)
▪️ Density Altitude (meters) (–914 to 2743 m)

Check out the full video on Youtube

https://www.youtube.com/watch?v=PpXxNVGFQPo

09/09/2025

Congratulations to the Pac Performance Team on a well deserved PB.

09/09/2025

Congratulations to THE GODFATHER (Sam Sadek) with his 26B Quad Rotor Camaro running a PB of 6.18@227MPH.

09/07/2025

Muscle Car Challenge would like to welcome Darkwave Technologies / Connexion Concepts as a sponsor for our up coming event in October

Connexion Concepts is your go-to partner for cutting-edge electronic solutions in the performance motoring industry. Specialising in innovative, high-performance electronics, they offer custom-built products designed to enhance your vehicle’s capabilities. Whether you're after advanced control systems, bespoke wiring solutions, tailored circuitry, or custom data displays, Connexion Concepts—through their new venture, DarkWave Technologies—delivers purpose-built technology that drives results. With a reputation for quality and ingenuity, they push the boundaries of what’s possible on both road and track, ensuring your vehicle stays ahead of the competition.

16/03/2025

First look at the Wireless Steering Wheel System!

This powerhouse delivers 12 inputs, with 4 assignable as ADC inputs, giving you the freedom to fine-tune your setup. On the receiver end, you’ve got 12 outputs plus CAN, ensuring seamless integration into your system.

The steering wheel is powered by a rechargeable battery, meaning you can run it fully wireless or in wired mode, drawing power from the horn circuit. No more headaches from dodgy slip rings, worn-out horn pins, or flaky curly cords—this system guarantees rock-solid reliability when it matters most.

It operates over a 2.4GHz encrypted link with 2ms response times, ensuring lightning-fast, interference-free communication. Whether you’re going wireless for ultimate freedom or wired for endurance sessions, this system delivers the best of both worlds!

31/12/2024

Important Announcement for US Customers

From 1 January 2025, all orders for the WeatherTrack product within the United States will need to be placed through our official Distribution Partner, SB Parts Direct

You can place your orders directly through their website:
🌐 www.sbpartsdirect.com

This partnership will allow us to improve delivery efficiency, provide faster support, and ensure you receive the best possible service.

Please note that all existing and previous orders will continue to be supported by us directly. If you have any questions or require assistance, you can still reach out to us as usual.

Thank you for your continued support!
Connexion Concepts