Rogan Industries

Directions

Rogan Industries Performance and race fabrication

Craig’s 70 Chevelle in for 6 point fully removable roll cage, race seat mounts, fuel cell with boot floor cutout and a c...
18/09/2026

Craig’s 70 Chevelle in for 6 point fully removable roll cage, race seat mounts, fuel cell with boot floor cutout and a couple of other things. Thanks for trusting us with it!

Calvin’s Valiant we tackled a couple months back. 6 point weld in moly cage, removable chute bar, shock mounts and braci...
23/07/2026

Calvin’s Valiant we tackled a couple months back. 6 point weld in moly cage, removable chute bar, shock mounts and bracing.

Chappy’s XW was next on the list to get sorted. Chassis connectors, gearbox mount, new tubs with rail notch, raised the ...
16/04/2026

Chappy’s XW was next on the list to get sorted. Chassis connectors, gearbox mount, new tubs with rail notch, raised the boot floor for a bit more diff clearance and shock length, tunnel mod to fit the 4L80 and some firewall mods to make it all a bit neater. Thanks for trusting us with it!

BA Ute in for a bolt in 4 point cage, BRC notchable joiners.
15/03/2026

BA Ute in for a bolt in 4 point cage, BRC notchable joiners.

Justin’s Chev was back to tidy up a bunch of stuff. New tubs, headers and sump along with a bunch of other small things
07/03/2026

Justin’s Chev was back to tidy up a bunch of stuff. New tubs, headers and sump along with a bunch of other small things

Dave from and I had chatted about coil over strut converting his HQ coupe for a little while now. After sourcing some k...
23/12/2025

Dave from and I had chatted about coil over strut converting his HQ coupe for a little while now. After sourcing some killer parts from we got busy cutting all the old setup out and starting from scratch. Custom tube K member with removable center section, tube upper mounts braced to firewall and custom engine plate to help tie it all together. Thanks for trusting us with it mate! We appreciate it

A few adjustments made to fit the LS into Corolla. Making sure it’s easy to work on and service the engine we made a cu...
14/12/2025

A few adjustments made to fit the LS into Corolla. Making sure it’s easy to work on and service the engine we made a custom lightweight column, set up the engine and mid plate, chassis connectors linked into roll cage and a little firewall and tunnel adjustment. Thanks for your support we appreciate you guys!

Travs bad ass wagon, originally a whipple blown deal now running a 10/71 on methanol. 16 injectors, haltech R5 controlle...
30/08/2025

Travs bad ass wagon, originally a whipple blown deal now running a 10/71 on methanol. 16 injectors, haltech R5 controlled, plumbed with 200 & 550 series crimp fittings. Off to to tame the beast.

Just a bit more done on Aydens HJ, VF rad and fans, turbo headers, frame mounted turbo, dump pipe, intercooler and all t...
09/08/2025

Just a bit more done on Aydens HJ, VF rad and fans, turbo headers, frame mounted turbo, dump pipe, intercooler and all the other bits to keep the boost in and out. Just a little bit more to go..

Address

Sunshine Coast, QLD

Website

Alerts

Be the first to know and let us send you an email when Rogan Industries posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category