18/11/2026
Sometimes, cars aren't perfect straight from the dealership!
This Ford Everest arrived with machine polishing marks, rust spots, and scratches—and with a black roof, those imperfections really stood out.
Jay got to work bringing the paintwork back to life and restoring that smooth, glossy finish.
Here is what the process involved:
• Snow Foam: Before every wash, we spray snow foam over the car to safely lift heavy, bonded dirt and road grime before physically touching the paint.
• Three-Bucket Hand Wash: We use one bucket for washing, one for rinsing the sponge before dipping back into the soap, and one dedicated to the wheels. This keeps dirt and grime from scratching the paint.
• Drying: We use an air blower to blast water out of tight crevices a towel can't reach, followed by a plush microfibre towel and drying aid—which speeds up drying, adds towel lubrication, reduces water spots, and boosts gloss—to safely dry every panel without scratching.
• Paint Decontamination: We treat the surface to remove the tiny rust spots found on most new vehicles, which are caused by iron particles settling during shipping.
• Clay Bar Treatment: Using a resin-based putty and a lubricant, we safely pull microscopic, embedded contaminants out of the paintwork.
• Paint Correction (Machine Polishing): We machine polish the panels to remove swirls, light scratches, and buffer marks that haven't cut deep into the clear coat.
• Hand Polishing: We finish the polishing stage by hand to reach tight, awkward areas a machine can't get to, giving the entire car one final pass.
• Final Wax Protection: We apply a protective layer of wax to seal in the shine and protect all the work above.
We were thrilled with the final results, leaving this Everest looking the way it should have when it left the showroom!