All Van Mod's

All Van Mod's All Van Mod’s is a vehicle conversion company, specializing in taking your van, commercial vehicle, or 4wd and transforming it to fit your life style.

A custom build to a SWB Sprinter High   Roof.This custom fit-out was for a cleaning and restoration company who required...
27/05/2026

A custom build to a SWB Sprinter High Roof.
This custom fit-out was for a cleaning and restoration company who required specific heights to store their machinery for onsite use. We lined the lower panels with ply, fully sealed at floor level and around wheel arch, rhino lining over lower ply panels and floor for chemical and moisture resistance.
Heavy duty custom racking, mesh panel end with hooks for hanging at the sliding door and full mesh sides from floor to roof on the driver and passenger side for securing and protection.
If you're looking for the right fit-out for your work van, give us a call on 07 3209 5913 or feel free to visit our showroom located at 78 Moss Street Slacks Creek and let us transform your van.

Custom build to a VW Crafter.Heavy duty steel framed false floor carpet covered with dual drawers out rear door,  dual d...
19/05/2026

Custom build to a VW Crafter.
Heavy duty steel framed false floor carpet covered with dual drawers out rear door, dual drawers out of the lefthand sliding door with heavy duty rubber mat and ply sides from floor to roof height.
This custom build was for a plumber who wanted to optimize his cargo space, prevent stock from moving around during transit and to safely store his heavy duty power tools while on the go between jobs.
The steel framed false floor was made to carry bulky items, hot water systems & large tool boxes.
If your looking at enhancing the workspace in your van, give us a call on 3209 5913, or better still drop by our office located on Moss Street Slacks Creek and let us help you convert your van into a mobile workshop.

Custom fit to a 2024 LWB Hiace with a ply floor, rubber mat, roof racks, cargo barrier & Vas racking to maximize cargo s...
07/05/2026

Custom fit to a 2024 LWB Hiace with a ply floor, rubber mat, roof racks, cargo barrier & Vas racking to maximize cargo space and optimal storage for the customer.
This customer is a builder and wanted to turn his cargo space into a secure and organised workshop. If your looking for the right fit out for your work van give us a call on 07 3209 5913 or feel free to stop by our showroom on Moss Street Slacks Creek to see what we can do for you.

A simple fitout to an LDV Deliver 9.Cargo barrier, full ply floor, sides and hood lining with an insulation package incl...
25/03/2026

A simple fitout to an LDV Deliver 9.
Cargo barrier, full ply floor, sides and hood lining with an insulation package included and the mounting of his power pack to the passenger side rear of the van. This fitout is for a customer who is in the beginning stages of fitting his van out for his small mobile business.
If your looking for the right fit out for your work van look no further then All Van Mods, our office is located at 78 Moss Street Slacks Creek or feel free to phone us on 07 3209 5913

Custom build to a LWB Renault Trafic.This Renault was fitted with a ply floor, marine carpet and aluminium edge trims to...
26/02/2026

Custom build to a LWB Renault Trafic.
This Renault was fitted with a ply floor, marine carpet and aluminium edge trims to all doors. The upper ply panels have been carpet covered with trunkliner carpet along with a carpet covered hoodlining, boxed in wheel arches carpet covered and an insulation package to sides, roof and all doors.
This build is for the beginning stage of a campervan conversion.
If your looking for the right fit out and expert advise for your future campervan, give us a call on 07 3209 5913 or better still pop into our showroom located at 78 Moss Street Slacks Creek where the only limits are your imagination.

A custom basic build on an Iveco Daily.17mm structural ply floor with a heavy duty rubber mat and tie down points pulled...
14/01/2026

A custom basic build on an Iveco Daily.

17mm structural ply floor with a heavy duty rubber mat and tie down points pulled through floor.
This fit-out is for a Telecommunications company who required a structural ply floor with a non slip rubber mat to safely transport communication equipment in between jobs.
Give us a call on 07 3219 5913 or feel free to walk into our showroom located at 78 Moss Street in Slacks Creek for a quick quote.

A custom build to a Peugeot Expert.Full False Floor with a Carpet Covered Top.1 x Single drawer carpet covered out passe...
24/10/2025

A custom build to a Peugeot Expert.
Full False Floor with a Carpet Covered Top.
1 x Single drawer carpet covered out passenger side sliding door.
2 x Rear drawers carpet covered out rear door.
Vas Racking to drivers side rear and passenger side rear.
This fitout was done for a domestic & industrial painting specialist to safely store their paint and accessories while travelling between jobs.
Looking for the right fit out for your work van?
Give us a call on 07 3209 5913 or come down to our showroom located at 78 Moss Street Slack Creek for expert advice on fitting out your van.

Custom fit to a Toyota Coaster Bus.Removal  of 2 double rear seats on drivers side with a made to order rear lockable me...
20/10/2025

Custom fit to a Toyota Coaster Bus.

Removal of 2 double rear seats on drivers side with a made to order rear lockable mesh cage including mesh protection to the last 2 rear windows. This build was made to safely store luggage while transporting workers to and from mine sites.

If you after something similar to suit your needs give us a call on 07 3209 5913 or come down to our showroom located on Moss Street Slacks Creek.

Custom fit a 2024 LWB Hiace.Cargo Barrier and air conditioning curtain with VAS racking on drivers side with a 4 tier ca...
30/09/2025

Custom fit a 2024 LWB Hiace.
Cargo Barrier and air conditioning curtain with VAS racking on drivers side with a 4 tier cabinet, 4 carry cases and a 17mm form ply top.
VAS racking to passengers side with a custom made workbench with a 3 tier cabinet and 3 carry cases, tool tray and a 300mm led work light mounted above the custom made workbench.
This fit out was for a Commercial Locksmith that provides key cutting, lock installation and repairs and integrated security solutions.
If you're after a specialized fit out for your van, drop into our showroom located on Moss Street Slacks Creek or call us on 3209 5913 and let us show you what we can do for your van fit out.

Custom fit to a Mercedes Sprinter, Safety Excel Techsafe seat with a 12mm plywood floor carpet covered, ply sides carpet...
01/08/2025

Custom fit to a Mercedes Sprinter, Safety Excel Techsafe seat with a 12mm plywood floor carpet covered, ply sides carpet covered, insulation package to walls and doors and custom made carpet covered partition behind seat with a boxed in wheel arch with extra storage.

The boxed in wheel arch on each side was for the sole purpose of transporting Go Carts to various tracks around Brisbane, the storage compartment was used for tool storage for the Go Carts.

If you looking at converting a van for the transportation of Go Carts, Motorbikes or anything else you may require, come see us at our showroom at Slacks Creek, or give us a call on 07 3209 5913 to discuss your personal needs.

Address

78 Moss Street
Slacks Creek, QLD
4127

Opening Hours

Monday 7:30am - 4pm
Tuesday 7:30am - 4pm
Wednesday 7:30am - 4pm
Thursday 7:30am - 4pm
Friday 7:30am - 2pm

Telephone

+61732095913

Alerts

Be the first to know and let us send you an email when All Van Mod's posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to All Van Mod's:

Share