CMS Performance

Call Directions Website

CMS Performance Melbourne 4WD Dyno Tuning - All makes & models. Aftermarket ECU's, Diesel Flash Tuning.

16/10/2026

Such a great car! thankyou Honed for letting us drive the car today

Good luck to everyone who has entered, see you there this weekend!
15/10/2026

Good luck to everyone who has entered, see you there this weekend!

09/10/2026
Honda Nationals tuning is well under way, 10 more Honda tunes to go.
23/09/2026

Honda Nationals tuning is well under way, 10 more Honda tunes to go.

1HZ 80 series with a new turbo setup fitted, the factory pump needed a tweak to suit, picking up 20kw & 50nm with all sa...
06/09/2026

1HZ 80 series with a new turbo setup fitted, the factory pump needed a tweak to suit, picking up 20kw & 50nm with all said and done.

πŸ“ˆ Results: 80kw & 269nm
πŸ₯” Pump: Stock Non-Compensated

LS1 GQ initially making a sad 90kw thanks to an ignition drama and requiring a tune. Once sorted the stock 5.7 was tuned...
05/09/2026

LS1 GQ initially making a sad 90kw thanks to an ignition drama and requiring a tune. Once sorted the stock 5.7 was tuned back up to 145rwkw through the manualised Nissan RE4 gearbox.
Much better, even if the top end power was completely destroyed by the ZD style airbox 😭

πŸ“ˆ Results: 145kw & 310nm
πŸ’» ECU: GM P01 - HP Tuners

VE SSV Redline in for a tune (and DOD disable) after an OTR & Exhaust had been fitted to let this Auto LS2 breath a litt...
04/09/2026

VE SSV Redline in for a tune (and DOD disable) after an OTR & Exhaust had been fitted to let this Auto LS2 breath a little better.

πŸ“ˆ Results: 240kw & 476nm
πŸ’» ECU: OEM - HP Tuners

Bagged/GTR Panelled R33 in the build, coming in for a dyno tune with a forged RB25, PSR3076 on a 6boost manifold, Apexi ...
03/09/2026

Bagged/GTR Panelled R33 in the build, coming in for a dyno tune with a forged RB25, PSR3076 on a 6boost manifold, Apexi PowerFC, Z32 MAF & running on E85, Boost peaking at 24psi.

πŸ“ˆ Results: 351kw & 515nm
πŸ’» ECU: Apexi PowerFC

"ETC kaado o irete kudasai"Not something you would expect to hear when starting up a Mini.This super neat JDM Mini runni...
02/09/2026

"ETC kaado o irete kudasai"
Not something you would expect to hear when starting up a Mini.

This super neat JDM Mini running the standard 1275cc A+ single point injected engine.

πŸ“ˆ Results: 35kw & 68nm
πŸ“± ECU: Motorola MEMS1.6

Now for a turbocharged NB!This MX5 has been in and tune previously so just a health check and squeezing a weee bit more ...
01/09/2026

Now for a turbocharged NB!
This MX5 has been in and tune previously so just a health check and squeezing a weee bit more out of this built 1.8lt (non VCT), running 15psi boost and tuned on a Haltech Elite 1500 ECU

πŸ“ˆ Results: 172kw & 264
πŸ’» ECU: Haltech Elite 1500

Address

2/8 Cumberland Drive
Seaford, VIC
3198

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

+61390880762

Alerts

Be the first to know and let us send you an email when CMS Performance posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share