DJZ fabrications

DJZ fabrications DJZ fabrication
Street based race car fabrication
Engine reco to full race requirements
Roll cages,plenums and everything in between
Top 3 quickest 1jzs

Still a stock piston 2.5 1jz 🥳
06/11/2024

Still a stock piston 2.5 1jz 🥳

30/04/2023

A lil check up at Ramsdell Racing for Todd’s S chassis. If you recon you have enough to keep up he’ll be at power play .
30/25 and ProBoost 42 🤛

07/12/2021

The 88/91 precision series 2 is on the supra for some testing on the std main capped 1.5 JZ .
Still plenty left in the set up for a mechanical pump in the new year. It showed 1200hp at the hubs through the thirsty T400 and springs up on the transbrake with a little gas help.
Cheers to the people that made it happen
Sean Ramsdell AllFast Torque Converters
Shotgun Performance Transmission & Race Components last but not leastYates Auto Electrical .

Mr Longs full house 2jz will be cracking out some numbers soon with this Real st inspired build. Only the finest compone...
06/02/2021

Mr Longs full house 2jz will be cracking out some numbers soon with this Real st inspired build. Only the finest components were used including their own hi comp pistons and Manly turbo tuff rods . Top end cylinder heads took care of the big valve set up and port job to suit big hp .

07/11/2020

The HECKLER himself on the road to Mexico !
Power gluide and Precision’s doin the job for now .

05/09/2020

Dan M having a cracker of a skid and race before the rain cutting the event short 😏.

Great day at power play! One of the best races of the day . I love racing the Aussie muscle cars 👍💪🏿
18/07/2020

Great day at power play! One of the best races of the day . I love racing the Aussie muscle cars 👍💪🏿

19/06/2020

After 3 years of Mr Kean gathering parts we’ve got it on the rollers for him . Great result through a 5500 converter and gluide. Cnc ported cylinder headed 1.5 JZ. At 830 bhp we will finish the tune on a hub dyno to eliminate any slip. Thanks to Efi performance tuning and
12volt performance wiring .

24/05/2020

Supra was in this morning for a check up with the new forged engine . Is showing some potential.
A throttle body upgrade is needed to relieve a restriction but is soo good to drive .

Jake now has a great looking rear end wont be booted from the drags anymore. The cage is to be teched to an 8.0 pass wit...
09/05/2020

Jake now has a great looking rear end wont be booted from the drags anymore. The cage is to be teched to an 8.0 pass with a 180mph rated chute. Has a full interior to go back in and will be heading south to play with the other gtr boys soon .

Address

Rochedale, QLD

Website

Alerts

Be the first to know and let us send you an email when DJZ fabrications posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category