2NV industries

05/01/2026

Hi All,

It’s been some time since I’ve posted, truth is I’ve tried many times the past 12 months but I just haven’t been able to find any strength or words.

2025 has been a rough year with family, friends, customers and communities all suffering losses, facing health battles or significant environment threats. I feel like empathy has impacted me very heavily and isn’t letting up.

Personally my circumstances have also been evolving. Over the past year I’ve needed to create space between personal life, business and the reality of becoming a carer in an attempt to keep clarity in my mental health. I’m not going to lie, I’m overwhelmed and things are tough but I have a great support network and a proactive approach to perform this roll the best I can.

Right now I’m coming to grips with the reality that my business, customers and friendships may all be impacted which hurts deeply. Being self employed isn’t easy and being emotionally attached to the fact you have all made it possible makes it hurt a little more.

I’ve been very reluctant to onboard new customers or projects for these reasons and mean no offence to anyone who requires our services.

Ultimately I want 2NVIndustries to be on the other side of this experience but I have no Idea how long that will be or how much I will change as a person, in the meantime I will continue to chip away at the work and make sure the businesses financial needs are meet to keep to 2NVIndustries going.

I wish you all the best for the year ahead, thank you for your support and understanding.

30/07/2025

Bending large fuel lines into OE routing for an MPS3, easy? Not really, very awkward and as always when making a custom solutions some element of compromise will become evident. Very grateful the idea is falling into place without to much protest and no wasted materials! Some finer details for fixtures, rub points as well as preparing the ends for hose work still to finalise but at least we know how all that fuel is getting to the engine!

01/07/2025

Getting your Mazda3 MPS is serious business! Here’s what you need to know about the MPS3 specific FS2000 in tank fuel sender module. Each unit is tailored specifically to meet the fitting and fuelling demands of each individuals vehicle. Parameters such as HP and boost potential, engine management type with OE type inputs to turn pumps on as well as battery and pcm locations in order to accurately manage and supply fuel with precise, efficient, uninterrupted control at the most demanding levels are all part of delivering arguably the best fuel delivery system the Mazda3 MPS platform has ever seen. Out of sight and out of mind? By keeping components in OE locations this fuel system arrangement avoids routing volatile fuels into cabin mounted surge tanks, isolates noise and allows for direct routing of oversized supply and return lines to the engine bay simplifying overall fitment and functionality while still supporting the factory direct fuel injection system. For those with gen1 MPS3’s we are confident the gen2 tank can be adapted and will be confirming that in the future.

27/06/2025

Some very large custom fuel lines in the making! 1/2” feed and return line currently being straightened off the roll before we profile into factory routing locations for that OE look and simplicity! From the custom in tank FS2000 twin pump hanger to the massive FPR10 fuel pressure regulator, this fuel system is both crazy massive and sensible!

26/05/2025

Super stressful situations like seized thread extractions from cylinder heads are definitely a little easier to manage with drill bits on hand! Hand drilling a 5mm hole 20mm deep perfectly centered through an M6x1mm bolt is proof of excellent quality and drilling control.

26/05/2025

This unplanned mission nearly broke me last week. What started out as a plastic fitting replacement turned into x3 seized M6 thread extractions from both cylinder heads of this Ford FGX XR8 supercharged miami 5L V8. That’s a pretty stressful task, the possibility of this turning into an absolute disaster was pretty high and with professional thread repairers “not interested” I was forced to ride this out to the end! I had a mate make up a special jig from scrap, prepared the tops of the threads with a dremel and cautiously proceeded successfully extracting all 3 bolt threads. Much to my surprise 1 thread extraction was preformed so precise that a helicoil wasn’t required! That’s an M6x1mm bolt with a 5mm drill sent 20mm deep perfectly straight with a hand drill! Full pear shaped meltdown avoided!

22/05/2025

The universe has either been trying to guide me or really test and find the breaking point of my personality the last few months.

Despite learning so much about constant good decision making there is never really any letting off or reprieve for a one person business, the challenges will keep coming so staying determined eventually will result in some form of crippling mental fatigue to overcome and I have not been looking after myself well enough to avoid that burnout.

Once you start and establish your own business it requires attention everyday to sustain, there are so many elements! It’s rewarding in some sick way that I can’t explain.

Avoiding burnouts is my major priority currently so I can better maintain my business and my customers 🙂

I’m still in the shop trying to progress on everything 🙂

Except the squeegee, that’s a loosing battle atm.

Pics, world’s largest MPS3 air box in construction and broken supercharger manifold bolts in an Aussie muscle car testing my thread repair capabilities with major consequences lurking.

06/05/2025

Fantastic opportunity to get your home or business powered by solar, support a race team and get some dollarydoos in your back pocket!

Want an easy $500? Your business referral could put your name on our race car – and $500 in your pocket!

We’ve got a unique sponsorship opportunity on the table with a leading Australian solar company — and we’re reaching out to our network to help make it happen.

If we can refer a 20kW or larger solar system install (ideal for a large house, small-to-medium business or bigger), they’ll come on board as a sponsor for our 2026 QLD Production Car Series campaign.

Here’s what’s in it for you:
✅ $500 cash if the referral comes from you and goes ahead
✅ Your name or business featured on our race car for the rest of the season
✅ The business that installs the system gets free sponsorship, with branding on the car, team wear, and socials

It’s a genuine win-win-win:
✅ You get rewarded
✅ A business gains high-value exposure
✅ We secure a sponsor to keep the team charging forward
✅ And the business gets a quality solar system from the company recently awarded best solar installer in Australia — top-tier service and tech from the best in the game

Got a lead or want to know more? Shoot us a message.

SHARE THIS AROUND and give it a like — one post could get your name on a race car and $500 in your hands 😎

28/04/2025

Find out more about Naylor Racing!

Follow them on their journey back into the 2026 Australian Production Cars series!

A friendly reminder that the team has prepared sponsorship proposals and also welcome potential interested sponsors for this televised series to contact the team or 2NVIndustries for more information 🙂 We would love to see this mighty Mazda MPS representing our communities!

Thankyou all and we hope to see you at the track!

28/04/2025

A team wanting more! racing is preparing for a comeback in 2026! The past few years haven’t been kind and as a result this family owned team hasn’t been able to get to a track and enjoy what they do best which is racing with family and their close team mates! We have a small task at hand preparing the race car which unfortunately was delivered in a very sad state, mainly in large tubs full of parts and no powertrain :( But as teams do we come together to make something possible! We now have one serviced and assembled gearbox and the only usable engine we have left is almost together after some inspection, measuring, minor service and a few vital parts to get us another step closer to race trim! The team has also started preparing sponsorship proposals and welcome anyone who would like express their interest in potential sponsorship for this televised category to DM the team or 2NVIndustries for more information:)