ShiftKits Australia

Call Directions Website Contact the business

ShiftKits Australia ShiftKits, Automatic Transmission Controllers, Custom Electronic Controllers, Electronic Fuel Injection, Vehicle Wiring and Complete Re-Wiring

Nick picked up his brand new 2026 Ford Ranger Super Duty XLT from the dealer and dropped it straight off to us, to arran...
15/10/2026

Nick picked up his brand new 2026 Ford Ranger Super Duty XLT from the dealer and dropped it straight off to us, to arrange installation of an IGLA immobiliser, making sure the car can not be driven without authorisation.

As there was no existing firmware for the 2026 Ranger Super Duty, we then proceeded to log the vehicle and generated the firmware to suit.

This Pin-Code immobiliser protects the vehicle from being started or driven, keeping your car where it was parked.

• PIN code entry via factory controls
• Invisible to thieves (no lights or sounds)
• Prevents theft, even if they have your keys
• Factory remote start unaffected and remains operational.

No pin -> No play! IGLA

Contact us if you want your vehicle secured!

www.shiftkits.com.au
www.igla.com.au

17/09/2026

Ray's Coyote / 10r80 F truck, all the **BAD** engine wiring ripped out, and the new PBH ecu and wiring put back in, started up 1st kick 🤩

Well, here we have a customers truck, that has been freshly wired up by another shop, and has never started and run, bec...
14/09/2026

Well, here we have a customers truck, that has been freshly wired up by another shop, and has never started and run, because it wouldn't start.

It came in to me to take a look and sort out ( just the engine wiring), and upon looking over it and unpicking some of the tape and sleeving on the wiring that had been done, this is what I saw...

This is a Gen 3 coyote / 10R80 swap in which they have attempted to use the stock ecu as is.

All of the powertrain wiring is now removed and being replaced by a PBH Coyote / 10r80 control pack

Guys, if your going to spend $$$ on getting your vehicle's wired, please do some research on who you use, and i'd advise to thoroughly look over some of their previous work - or otherwise you might be in this situation where it needs to be all ripped out and done again.

Stop the theft of your 200 / 300 series landcruiser, Prado, Y62 Patrol, VE, VF Commodore, Ford Ranger, RAM, Silverado o...
15/08/2026

Stop the theft of your 200 / 300 series landcruiser, Prado, Y62 Patrol, VE, VF Commodore, Ford Ranger, RAM, Silverado or most other vehicles with start/stop buttons with an IGLA digital pincode immobiliser.

No Pin, No Play

Contact us for more info.
www.shiftkits.com.au
www.igla.com.au

HQ full rewire from front to back, all hidden wiring thru the engine bay, including wiper motor relocation, elec fans, e...
15/08/2026

HQ full rewire from front to back, all hidden wiring thru the engine bay, including wiper motor relocation, elec fans, elec fuel pump, elec power steering

Hitting the skid pad today in Spin4L Cody Mackie's AU at SkidFest 22 with Rob Mackie
04/07/2026

Hitting the skid pad today in Spin4L Cody Mackie's AU at SkidFest 22 with Rob Mackie

Stop the theft of your 200 / 300 series landcruiser, Prado, VE, VF Commodore, Ford Ranger, RAM or most other vehicles w...
03/06/2026

Stop the theft of your 200 / 300 series landcruiser, Prado, VE, VF Commodore, Ford Ranger, RAM or most other vehicles with start/stop buttons with an IGLA digital pincode immobiliser.
Contact us for more info. www.igla.com.au

28/05/2026

Spin4L - Cody's AU all up and running and ready for a test and tune, with the new Haltech ECU, CAN Solutions interface module, and some bigger injectors to give it the fuel it needs.

New Haltech gear for Cody's AU burnout car, also special thanks to Nigel Veerhuis from CAN Solutions https://www.facebo...
20/05/2026

New Haltech gear for Cody's AU burnout car, also special thanks to Nigel Veerhuis from CAN Solutions https://www.facebook.com/CANSolutionsAUS for sponsoring a CAN adapter to keep the factory cluster operational with the new ecu.

A customers HZ GTS came in with some pretty rough wiring, so the best solution here was to strip it all out and do a ful...
20/05/2026

A customers HZ GTS came in with some pretty rough wiring, so the best solution here was to strip it all out and do a full custom rewire. Also setup his B&M shifter to fit and work under the factory console and gear position indicator 👌

Address

Perth, WA

Telephone

+611300663128

Website

Alerts

Be the first to know and let us send you an email when ShiftKits Australia posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to ShiftKits Australia:

Shortcuts

Sponsored

Share

Category