Faraone Engines / Pro Dyno Tune

Faraone Engines / Pro Dyno Tune EST1990. Leaders in Engine building and Tuning. Naturally aspirated And Boosted.

16/07/2026

Stock L98 6ltr Bottom end.
550 rwhp n/a on 98ulp.
Faraone Engines heads cam & combination.
Paddys Ve T56 manual ,3.45 final drive.

Paddy wanted strong N/A Torque and power with great drivability and our most important thing is Real strong Average torq...
16/07/2026

Paddy wanted strong N/A Torque and power with great drivability and our most important thing is Real strong Average torque curve across the whole rpm range from his stock 6.0. So he came here.

As delivered Paddys ute already had 1& 7/8 headers a dual 3 inch exhaust an otr and tune all that was carried out elsewhere.

To give documented real world Torque and Power gains we always run up each car as delivered so we can show and back up the gains after the work here.

Run as delivered on our hub dyno Paddys L98 powered ute made a below average out put. Usually with these mods 370rwhp is made...But Paddys L98 made 318rwhp peaking at 5350 rpm and 458rwnm of torque peaking at 4226rpm.

After the work done here custom cam combination, roller rockers,lifters, ptvc, ported heads, lsxr 102 and tb, hv injectors, hurricane headers and custom mafless tune.

Paddys N/A L98 makes 550rwhp peaking at 6470rpm and 671rwnm peaking at 5090rpm.
That is a Rwhp gap of 232rwhp and Torque gain of 213rwnm.

For the ones that cant comprehend a stock 6.0 making this.
Add 318 rwhp as delivered To the 232rwhp gain from our work...on the same dyno with the same diff and trans.
That adds up to 550rwhp from this stock gm bottom end💪

Jeremy From SSAR auto repairs dropped a 2015 Jeep Srt off for a tune here.Run as delivered it made 460rwhp and 678rwnm o...
15/07/2026

Jeremy From SSAR auto repairs dropped a 2015 Jeep Srt off for a tune here.
Run as delivered it made 460rwhp and 678rwnm of torque on our hub dyno.

Result after tuning here is 485rwhp and 691 rwnm .
Great drivabilty with the cams now, Torque and horsepower gains across the entire Rpm range and no more stalling at idle.

10/07/2026

N/A 400 plus rwkw. From this Stock 6.0 bottom end travelled 80,000km. Great average torque spread. Perfect drivabilty. Red line well under 7krpm on this stock well used L98.

Paddys Ve Ss with a stock L98 - 1 7/8 headers dual 3 inch exhaust , Otr and tune done elsewhere made 318rwhp@5250rpm a...
10/07/2026

Paddys Ve Ss with a stock L98 - 1 7/8 headers dual 3 inch exhaust , Otr and tune done elsewhere made 318rwhp@5250rpm and 458rwnm @ 4200rpm on the hub dyno as delivered.This is About 40rwhp down already for this particular set up.

This same stock 6.0 will get a Faraone engines 400plus rear wheel kw N/A cam heads top end combination.
Before and after results on the same dyno will be posted.They always tell the truth the gap between the before and after is what it is.

Nathan fitted a 304 holden into his vk along with a haltech 2500. He had it tuned but it wasnt running right. Fowling pl...
10/07/2026

Nathan fitted a 304 holden into his vk along with a haltech 2500. He had it tuned but it wasnt running right. Fowling plugs and undrivable.First Run as delivered it wouldnt make more then 30hp.
The cylinder reference was a mile out so his ignition timing was retarded.Syncing that saw power jump to 96rwhp to start from.

The end Result after tuning nathans 304 that came in with 30rwhp is 250rwhp and 767rwnm.

Nic dropped his Vy off for a retune.It had been tuned prior to coming here making 321rwhp and 418 rwnm run as delivered...
10/07/2026

Nic dropped his Vy off for a retune.It had been tuned prior to coming here making 321rwhp and 418 rwnm run as delivered.
Result after tuning here is.
Much better automatic shift schedule and Torque , Power gains across the entire rpm range evident in the before and after comparison graph. 341rwhp and 455rwnm .

Matt's Ve 6 speed Auto wagon runs a L77 under the hood with the following upgrades.Faraone engines - 30 cam package to ...
26/06/2026

Matt's Ve 6 speed Auto wagon runs a L77 under the hood with the following upgrades.

Faraone engines - 30 cam package to suit a stock stall Auto.
Afm delete , otr , headers ,dual 2.5 inch exhaust and Faraone engines custom tune.
This humble 6ltr Delivering great Torque, power and drivabilty on the road .
Making a good average spread of hp and torque not just at peak.

456rwhp and 660rwnm of torque.

25/06/2026

Kosac's vy ls1 stock 346ci bottom end

Top end work is Faraone Engines ported 241 heads, 22 cam package.,hv injectors and 525 fuel pump, 1 7/8 headers dual 2.5 inch x force exhaust ,on 98 oct ulp - 500rwhp & 1000rwnm driving through a 3800 stall and 4L60 auto trans.

Franks vf already had an otr and mafless tune as delivered made 398rwhp and 580 rwnm.Wanting more out of it Frank had ...
24/06/2026

Franks vf already had an otr and mafless tune as delivered made 398rwhp and 580 rwnm.
Wanting more out of it Frank had us unlock his pcm and re tune his Vf.

Result is 437rwhp and 628 rwnm totque and power gain across the entire rpm range..not just at peak as can be see in the before and graph.

Address

Unit1/50 Conquest Way Wangara
Perth, WA
6065

Opening Hours

Monday 11am - 6pm
Tuesday 11am - 6pm
Wednesday 11am - 6pm
Thursday 11am - 6pm
Friday 11am - 6pm

Website

Alerts

Be the first to know and let us send you an email when Faraone Engines / Pro Dyno Tune posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Faraone Engines / Pro Dyno Tune:

Shortcuts

Featured

Share

Category