Scott's performance engines

Scott's performance engines Engine assembly from street to race. Flowbench testing on superflow 600E bench. Cylinder head and intake porting.

A good old Holden 5L going together for a VS grange. Keeping standard 304 cubes with a small cam upgrade 216/228 @ .050...
18/07/2024

A good old Holden 5L going together for a VS grange. Keeping standard 304 cubes with a small cam upgrade 216/228 @ .050 some stage 1 ported heads as will still be retaining factory manifold. Will all make for a nice cruiser.

Edelbrock 2892 manifold came in for porting to suit a 434 sbc nitrous engine. After having intake waterblasted the intak...
12/07/2024

Edelbrock 2892 manifold came in for porting to suit a 434 sbc nitrous engine. After having intake waterblasted the intake was flow tested on the afr 235 head with nitrous fogger plate and qft carby as a complete assembly to record cfm and air speed velocities. Then measuring of the runner lengths, cross sectional areas, runner volumes and runner taper were taken and adjusted as required to suit the engine combo. Finishing intake off in burr finish. The nitrous fogger plate did restrict being able to open up carby fl**ge as required.

If you need any flow testing carried out with full data sheet provided with test feel free to contact me.

Address

Perth, WA

Telephone

+61415459163

Website

Alerts

Be the first to know and let us send you an email when Scott's performance engines posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Scott's performance engines:

Shortcuts

Featured

Share

Category