RJ Motorsports

RJ Motorsports This is a dedicated page for drag racing, circuit racing, speed way and go karting enthusiasts

All out Drum of ETS are now 25ltr sealed drum.Have Xpd105, ProDrag3 & Ma100 available.Contact myself or Aaron at ADS fo...
24/03/2025

All out Drum of ETS are now 25ltr sealed drum.
Have Xpd105, ProDrag3 & Ma100 available.

Contact myself or Aaron at ADS for purchase

Time to strip our Jerry Bickel Race Car designed S15 drag car (built by RJ Motorsports) stripped back to a bare metal ch...
08/03/2025

Time to strip our Jerry Bickel Race Car designed S15 drag car (built by RJ Motorsports) stripped back to a bare metal chrome moly chassis and on our chassis jig.
Will be doing a complete chassis inspection after 10+ full years of racing. With multiple updates we have been wanting to do to the car that has been difficult with it together.
Aswell as a complete freshen of the 299ci mph national record holding "efi sbc" and some time on our Sf900 Superflow dyno.

Now stocking ETS fuels, with XPD105, ProDrag3 and MA100. Enquire for advice an requirements
30/12/2024

Now stocking ETS fuels, with XPD105, ProDrag3 and MA100.
Enquire for advice an requirements

Already to load in the trailer for the Western Nationals this weekend. Fresh diff centre in the car this weekend, an a b...
29/02/2024

Already to load in the trailer for the Western Nationals this weekend.
Fresh diff centre in the car this weekend, an a bit more time spent on the Nexus ecu with the ignition timing sorted...

1st meeting back for the season an had a few issues. After damaging a pinion bearing in the diff, the diff was out of th...
21/01/2024

1st meeting back for the season an had a few issues. After damaging a pinion bearing in the diff, the diff was out of the car thinking our day was, Todd Stacy from Rotormotion was kind enough to lend us a diff to at least get us running for the rest of the meeting(just had to 5.67 from our 6.0-1).... rest of the meeting we spent sorting minor issues with the new computer system in the car, but nothing we can't get perfect.

Finally back at the track getting ready to unload for the 1st time since last season
19/01/2024

Finally back at the track getting ready to unload for the 1st time since last season

The little 299ci sbc splayed valve engine is back in the car & getting wired up with the latest Haltech Nexus R5 an dash...
08/12/2023

The little 299ci sbc splayed valve engine is back in the car & getting wired up with the latest Haltech Nexus R5 an dash display by Haltech. All replacing our previous MSD grid system an front drive distributor system & moving to the latest multi 8x coil packs an crank angle sensors.

Just had a quick start up on on some spare ETS fuel an a quiet drive, might have to get the machine out later in the yea...
17/09/2023

Just had a quick start up on on some spare ETS fuel an a quiet drive, might have to get the machine out later in the year

Dummy fitting up the coil packs an sorting brackets out
01/09/2023

Dummy fitting up the coil packs an sorting brackets out

Time to rewire the hole car, an get rid of the Msd ignition & racepak logger an run it through the Haltech Nexus r5 & Da...
22/08/2023

Time to rewire the hole car, an get rid of the Msd ignition & racepak logger an run it through the Haltech Nexus r5 & Dash to run the complete car an logger now. Going to be interesting to see a complete EFI aspirated V8 car in SuperStock with the multi coil set up aswell this season.

After just over 50 passes this season pistons out, heads off an still looking perfect on the Maxima oils an ETS Racing ...
16/07/2023

After just over 50 passes this season pistons out, heads off an still looking perfect on the Maxima oils an ETS Racing Fuels Australia XPD105.
Definitely safe on everything.

Address

Perth, WA

Website

Alerts

Be the first to know and let us send you an email when RJ Motorsports posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Featured

Share

Category