RPM Fabrication

RPM Fabrication RPM Fabrication specialises in Automotive fabrication,
everything from pro street cars to drag and drift cars.

Thanks to for the fast fab and dispatch before Christmas of this beast of a cooler for Jamie Mc Gloin s15.We fitted up,...
21/01/2026

Thanks to for the fast fab and dispatch before Christmas of this beast of a cooler for Jamie Mc Gloin s15.
We fitted up, and re-plumbed the intercooler in time for the targa west sprint events.
And new splitter with moly support work to suit.

Thanks to Tune Corp last year I got to help in the build of this very clean wagon.On the order from Shannon was a custom...
10/01/2026

Thanks to Tune Corp last year I got to help in the build of this very clean wagon.

On the order from Shannon was a custom exhaust front to back, and starting with the headers on a hk, g, body running sbc, with factory steering box and linkage auto is never an easy assignment....
If you no, you no...

But always up for the challenge I squeezed 1" 7/8 primarys past all the factory obstacles, and fabbed a twin 3" system from there back.👌

Dan's S15 was in the shop recently for some finishing mods, such a clean car already with some neat fabrication already ...
23/10/2025

Dan's S15 was in the shop recently for some finishing mods, such a clean car already with some neat fabrication already completed nice to put my touch on things.

Running a built 2jz sporting a rather large gtx47, power glide and irs rear end, dan is planning on bolting on some radial slicks at the drag strip.

On the list for us to complete.

* Mount dry sump tank and fab mount for dry sump pump.
* Mount peterson prime pump oil filter housing.
* Fabricate crossmembers to mount water to air cooler.
* Fab 3.5" intercooler plumbing and 6" air feed for turbo.
* Fab coolant lines to rear mounted radiator.
* Fabricate containment tray below engine.

Custom exhaust on a AMG G Wagon!?... 👍Twin 3" stainless dump pipes off the turbos into 3" mufflers, then using the facto...
19/03/2025

Custom exhaust on a AMG G Wagon!?... 👍

Twin 3" stainless dump pipes off the turbos into 3" mufflers, then using the factory bi modal valves we built a bypass exhaust around the second mufflers, so with a touch of a button can increase flow and sound. Finishing the exhaust out under the side steps, we then built some custom exhaust tips that compliment the stream line curves of the wagon....

Thanks to Tune Corp for the call up for the job, and accommodating me at their workshop.

Super tough 2jz in a commodore!, I'm a bit biased.... but love this combo.John from Ignite auto electrical gave us a c...
27/02/2025

Super tough 2jz in a commodore!, I'm a bit biased.... but love this combo.

John from Ignite auto electrical gave us a call to build a turbo manifold and pipes for his 2jz and I jumped at the offer!

Running a built 2jz by Jeff Johnson and a Garrett g45 we first started with mounting the engine and gearbox with new chrome moly mounts as low and far back as practical.

Next mounting the turbo using billet header plate and merge collector we fabricated the turbo manifold with egt's and titanium hardware.

John then asked the question, can you weld Titanium?? I said yes! And YES we should! 👍
So from the wastegate and turbo titanium was used to create a 2" screamer and 4" exhaust to the diff 👌

Lastly on the plumbing side we mounted a 6" thick hypertune intercooler and fabricated 3.5" aluminium piping running plenty of sensors and dual 50mm BOV.

Just a small array of pics from the different fab jobs from the last year. Thankyou to all my customers for letting me b...
26/12/2024

Just a small array of pics from the different fab jobs from the last year.
Thankyou to all my customers for letting me build some cool as cars and parts.
Already have an amazing list lined up for next year which I'm looking forward to.

My first car, a VK Commodore, not that popular back in the day, was the first plastic bumper edition Commodore....But I ...
30/10/2024

My first car, a VK Commodore, not that popular back in the day, was the first plastic bumper edition Commodore....
But I still own her and have a soft spot for the early commodores, so when this very good original VK rolled into the shop with a nice list of mods for me to do, she got two thumbs up and a smile!

Starting at the rear we split tubbed her to the chassis rails so we can fit a 275 radial, new shortened 9" diff with alli carrier truetrac, 35 spline axles and Wilwood brakes.
Custom moly control arms and brackets and extra weld and reinforcement on factory pick-up points.

Inside we built a 6 point removable rollcage with parachute brackets.

And up front we smoothed the engine bay out, fitted the LS engine and turbo400, built some stainless tri-y headers, which are 1 7/8" off the heads into 2" collectors, then twin 2.5" into 3.5" collectors which will happily support 1000hp if required.
👌💪

This lx torana hatch came through the shop recently for some tough street upgrades,Smoothed engine bay.Custom alli radia...
15/09/2024

This lx torana hatch came through the shop recently for some tough street upgrades,

Smoothed engine bay.
Custom alli radiator.
T56 crossmember and clutch setup.
Alli drop tank.
Stainless headers.
Stainless exhaust using oval pipe for mid section.

Another nice set of custom headers complete.This pair is for a very cranky 408 ls engine, fitted to a Nissan Pathfinder,...
06/08/2024

Another nice set of custom headers complete.

This pair is for a very cranky 408 ls engine, fitted to a Nissan Pathfinder, which has way more room than a commodore to swing some pipes, which was a nice change.

These are a stainless 1 7/8" primary into a 3" merge collector

Lx torana fuel tank completed, using aeromotive fuel pump assembly self regulated to suit carby application
20/07/2024

Lx torana fuel tank completed, using aeromotive fuel pump assembly self regulated to suit carby application

If anyone out there needs a set of bc coilovers for there vb-vl give us a shout! Just welded out this pair for a vk abou...
14/06/2024

If anyone out there needs a set of bc coilovers for there vb-vl give us a shout! Just welded out this pair for a vk about to come through the shop for some custom fab.

They come with adjustable strut tops but if you require a nolathane or rubber top for street duties can easily adapt to suit.

Address

Perth, WA
6123

Opening Hours

Monday 8am - 4:30pm
Tuesday 8am - 4:30pm
Wednesday 8am - 4:30pm
Thursday 8am - 4:30pm
Friday 8am - 4:30pm

Telephone

+61403598192

Website

Alerts

Be the first to know and let us send you an email when RPM Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Featured

Share

Category