PL Fabrication

Directions Website

PL Fabrication Located in Peakhurst NSW, we specialize in fabricating exhausts, dump pipes, intercooler piping, intakes, catch cans and more.

Just message us what you need and we will work with you with fabricating your needs.

Something we crafted recently for a turbo Back purged and full pe*******on.
18/09/2026

Something we crafted recently for a turbo
Back purged and full pe*******on.


18/09/2026


is everything.
We pride ourselves on making sure everything is aligned, supported and well sealed on all systems.
If it doesn't align/seal we do it again.
Anyone that works with stainless should know the struggle.


This was one of those jobs that was really fun to do.A clean came in for some bits and pieces to pass engineering. O...
08/09/2026

This was one of those jobs that was really fun to do.
A clean came in for some bits and pieces to pass engineering. One of the criteria to be met was to cover up the air filter so it's not completely open.
So we designed and made a cover that we think doesn't ruin the theme of the bay.
Exhuast manifold by Ben Walker it deserved it's own mention.


Ending the week with a bang.Getting everything symmetrical, level and getting welds / bends in the same position on both...
21/08/2026

Ending the week with a bang.
Getting everything symmetrical, level and getting welds / bends in the same position on both banks is one of those things that we get off on. It is such a rewarding end result.
We will let the images talk for themselves.
Happy

29/07/2026

Fit up on point. Weld on point. Full pe*******on.

Some of that action we laid out today.
15/07/2026

Some of that action we laid out today.

A photo dump of what we have been working on lately.Tasked to turbocharge this XY using, not 1 but 2 Turbosmart 8280 tur...
11/07/2026

A photo dump of what we have been working on lately.
Tasked to turbocharge this XY using, not 1 but 2 Turbosmart 8280 turbos.
We have modified/enlargened the inlets/outlets of the supplied PWR Advanced Cooling Technology intercooler to suit Hypertune hyperclamps and mounted it.
Fabricated a couple of custom mounts to locate the turbos and additional support from the turbo manifold. Probably excessive to weave the welds for the brackets but it looks pretty đŸ˜‚
Modified the compressor outlets to connect directly to the modified intercooler inlets
With the location of the turbos set, next up is the manifolds.
Stay tuned.

Made some mirror base plates on this VB to suit GT3 carbon mirrors.Made from 4mm alloy, we followed the same shape o...
27/06/2026

Made some mirror base plates on this VB to suit GT3 carbon mirrors.
Made from 4mm alloy, we followed the same shape of the OEM Mirror base plate and body contours. New rubber seals and all threads are tapped for easy installation and removal if need be.


twin turbo setup getting some thermal management under control.Testing yet rewarding
24/06/2026

twin turbo setup getting some thermal management under control.
Testing yet rewarding

Photo dump of some fabrication on a - Weld gate fl**ge to manifold- 2 piece 3.5" down pipe with flex pipe.- Plumb back...
24/06/2026

Photo dump of some fabrication on a
- Weld gate fl**ge to manifold
- 2 piece 3.5" down pipe with flex pipe.
- Plumb back the wastegate.
- 3" downpipe back exhaust using a SP Mufflers big boy rear cannon with a 4.5" tip
- Custom exhaust mount
- Weld elbow to compressor cover
- 1 piece hot side cooler pipe
- Intake pipe.

In and out within few days. Cya later.


Address

2/15 Lorraine Street
Peakhurst, NSW
2210

Website

Alerts

Be the first to know and let us send you an email when PL Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category