M-Tek Automotive Services

Call Directions Website Contact the business

M-Tek Automotive Services At M-Tek Automotive Services, we have a passion for all things cars.

from the daily driver to the weekend trackcar, if you need log book servicing on your new car or you want to build a race car we have the technicians available

30/09/2026

Chase recently bought us an L98 that he had purchased for his ultra tidy vl commodore.

We where told it had a glide with a 5k stall and that drivablility wasnt an isssue but max power and future plans for nitrous where the goals.

We fitted a crow cams 238/250 Camshaft with double valve springs, rocker triunion upgrade, heavy duty pushrods, ls7 lifter a double row timing chain set and a heavy duty oil pump. We also fitted all new genuine gaskets including head gaskets and a set of arp head bolts.

Once it was back togeather it was ready for chase and his dad to take it home and fit it all up with a goal of power cruise 100

Unfortunately some delays ment it wasnt ready for power cruise but a week later it was on the dyno getting tuned ready for a frydays event at Queensland raceway.

With a bit of a tickle on the carby and some setup on the msd we saw 455hp at 6900rpm through a bit convertor and a power glide.

Awesome work on an outstanding first car chase we hope you have years of fun out of it and good to see the young guys keeping these older cars front and centre.

22/09/2026

🛠️ 1JZ Toyota Cressida Build Wrap Up!

stealth.1j brought us his awesome Cressida to handle the engine build and dyno tuning.

Under the bonnet, the non-VVTi 1JZ-GTE features Spool rods, CP pistons, upgraded main studs, a 2JZ oil pump, Kelford 272 cams, valve springs, and a Pulsar 3770 turbo setup powered by a Haltech ecu

On the dyno, a flex fuel tune at 21 psi unlocked a stout 573 hp at the hubs, delivering massive midrange torque and a super responsive powerband for the street.

Get in touch today for your next performance build or tune!

15/09/2026

We’ve had heaps of you asking how the Foz (Forester Gump) went up the cape!

Lucky Jules Wilson Tucker built her right

09/09/2026

Here it is, our cape trip recap!

We had an absolute blast and can’t wait to go back again so sit back and check out what we got up to when we went to Cap York in our $10k rigs

🏎️ Pocket Rocket Leyland Mini Wrapped Up! Swipe for dyno run!We recently had this awesome Mini Leyland in the workshop t...
28/08/2026

🏎️ Pocket Rocket Leyland Mini Wrapped Up! Swipe for dyno run!

We recently had this awesome Mini Leyland in the workshop to get sorted. The team over at AM Auto did a crackin’ job fitting the B16 Honda engine, paired up with a 5 speed Honda gearbox complete with an L*D. 

She was handed over to us to get the engine management sorted out, so we threw it on the hub dyno for a full dyno tune to extract every bit of potential out of the combo safely. 

The results on the dyno speak for themselves! With a bit of a tickle, this lightened package laid down a stout 140kw at the hubs. 

With all that power going through the front wheels and the L*D keeping things hooked up, the drivability is unreal. It is an absolute weapon of a street package and a absolute handful on the road in the best way possible. 

For any of your tuning or performance needs, give us a call or send a message for a chat.

Clean R32 GTR built and ready to goWe had this unreal R32 GTR in the shop to get the electronics and driveline sorted ou...
07/08/2026

Clean R32 GTR built and ready to go

We had this unreal R32 GTR in the shop to get the electronics and driveline sorted out properly.
Under the bonnet, we tuned the Link G4X ECU to handle multiple boost settings, trans brake launch control, and anti lag. The owner can control all of those features directly through the CAN keypad.

We also configured the Haltech dash to display all the vital engine data cleanly. To back up the engine, we carried out a full custom tune on the TurboLamik TCU to get the 8HP70 transmission shifting fast and seamless.

On the dyno, it made a stout 850hp on 32psi using E85 fuel.
The shifting on the 8HP trans is lightning quick and the driving manners are top notch, making this thing an absolute weapon on the road.

For any of your tuning or performance needs, give us a call or send a message for a chat.

01/07/2026

We’re packing it up and heading north for a well deserved break!!

We’ll be back on the tools from the 20th of July and will get back to all enquiries that week

Thanks to all our amazing customers!

M-tek out!

🛠️ JDM Classic Fresh Engine Wrap UpPhil brought his immaculate 1999 WRX STI Version 5 Coupe into the shop after it unfor...
29/06/2026

🛠️ JDM Classic Fresh Engine Wrap Up

Phil brought his immaculate 1999 WRX STI Version 5 Coupe into the shop after it unfortunately developed a bad engine knock. After checking it out, the original motor was completely gone, so the goal was to get this iconic coupe back on the road with much better reliability.

We fitted a fresh EJ207 engine along with a completely new fuel system and upgraded injectors. Controlling the new setup is a brand new Haltech ECU running it all perfectly.

After a bit of a tickle on the dyno, it turned out to be a super punchy street package. It has excellent driving manners and delivers that stout power you want from a classic STI while keeping it safe for the street.

For any of your tuning or performance needs give us a call or send a message for a chat 👌

Little red corvette! We recently had this gorgeous C4 Corvette in to installed a baffled sump to protect the engine from...
04/06/2026

Little red corvette!

We recently had this gorgeous C4 Corvette in to installed a baffled sump to protect the engine from starvation!

For any of your tuning or performance needs, give us a call or send a message for a chat.

🛠️ Clean MG MGA in for a tune up and brake system overhaul!We had the pleasure of getting this classic MG back to its be...
07/05/2026

🛠️ Clean MG MGA in for a tune up and brake system overhaul!

We had the pleasure of getting this classic MG back to its best.

While we love our 1000hp builds, we treated this beauty to a bit of a tickle on the carburetors and a timing adjustment to restore its crisp throttle response and street manners.

It is now the perfect weekend cruiser once again. 

For any of your tuning or performance needs, give us a call or send a message for a chat. 👌🔧🏎️

Address

22 Project Avenue
Noosaville, QLD
4566

Opening Hours

Monday 7:30am - 5:30pm
Tuesday 7:30am - 5:30pm
Wednesday 7:30am - 5:30pm
Thursday 7:30am - 5:30pm
Friday 7:30am - 5:30pm
Saturday 8am - 12pm

Telephone

+61400507770

Alerts

Be the first to know and let us send you an email when M-Tek Automotive Services posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to M-Tek Automotive Services:

Share