Phats Kustom Automotive Fabrication

Directions

Phats Kustom Automotive Fabrication Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Phats Kustom Automotive Fabrication, Automotive Customization Shop, Wing Crescent, Mulwala.

08/10/2026

Quick and simple 3inch system for a spicy statesman,
Couldn't help myself but to chuck some of my blast pipes on to finish off neat in the bumper 👌🔥🔥

Exhaust system stopping your hotrod build?
Message the page and we'll get it sorted 🧑‍🏭🤘🔥

17/09/2026

Follow up vid of the 3inch 🔥🔥

17/09/2026

Quick little 3inch for the homies race car 👌

This hotrods spicyyy 🔥🔥

07/09/2026

Turbo ls1 3.5inch to twin 3inch 304ss xpipe 🤘🔥

05/09/2026

The barra ranger is waiting for more parts and wiring etc to be 100% ready for the road, keen is an understatement

Billy's 1kd ln106 Front mount cooler ✔️2.5" 304 hot/cold side ✔️Ammo airbox ✔️2.5" 304 dump pipe ✔️Up next Triple tank🔥3...
05/09/2026

Billy's 1kd ln106

Front mount cooler ✔️
2.5" 304 hot/cold side ✔️
Ammo airbox ✔️
2.5" 304 dump pipe ✔️

Up next

Triple tank🔥
3" 304 exhaust 🔥
Twin 4" snorkels 🔥
Transfer case mount modifications 🔥

This little ln106 is gunna be spicy 🤘🔥

16/08/2026

🤘🤘🤘🔥

Sadly due to some neighbours making false noise complaints to their thursday night Federation council drinking buddy's.....
03/08/2026

Sadly due to some neighbours making false noise complaints to their thursday night Federation council drinking buddy's...

PKF will be not be operating from my home base going forward, and I will be going mobile until my shed is built.

Another one out the door...Vy turbo ls1 ute The Killerboost g42 kit pretty much had the kit sorted other then a few bits...
07/07/2026

Another one out the door...

Vy turbo ls1 ute

The Killerboost g42 kit pretty much had the kit sorted other then a few bits that have to be custom made to suit the body,

Hot an cold side cooler pipes in 3" 304ss look smicko 👌

Off the provided 3.5" dump i fabbed a lower half in 3.5" 304ss that split into twin 3" that vbands out for easy removal if need be.

Then a quick and easy twin 3" 304ss was mad with 2x hotdogs in the middle and 2x growl mufflers either side with clean 3.5" dump tips🔥

The provide crossover pipe for the turbo manifold had a 60mm wastegate that i did a simple 2.5" 304ss flush cut dump right next to the gearbox under the drivers feet for all the noises🔥🔥

It also got 1000cc injectors and a 2bar map sensor an is currently waiting its turn at the dyno, this one should make some power 👌🤘🔥

F100 with a 351 clevo in for the 304 touch 🔥🧑‍🏭Came in for a set of 2inch 4-1 extractors and a 2.5 304 twin systemDriver...
16/06/2026

F100 with a 351 clevo in for the 304 touch 🔥🧑‍🏭

Came in for a set of 2inch 4-1 extractors and a 2.5 304 twin system

Drivers side was tight around the steering box and starter motor but we got there without restricting the pipe size.

A quick and simple 2.5 twin system with one of my xpipes an 2x growl mufflers dumped just before the diff.

Hit up the page and we'll sort ya hotrod out 😉

Happy fabbin 🔥🧑‍🏭🤘

Address

Wing Crescent
Mulwala, NSW

Opening Hours

Monday 7am - 5pm
Tuesday 7am - 5pm
Wednesday 7am - 5pm
Thursday 7am - 5pm
Friday 7am - 5pm

Website

Alerts

Be the first to know and let us send you an email when Phats Kustom Automotive Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category