Waye And Waye Engineering

Waye And Waye Engineering Design, engineering and fabrication of off road suspension and automotive systems. We will drive the ability of 24/7 Total Quality Management to envisioneer.

Waye and Waye Automotive Engineering practically invented the term "development". The capacity to recontextualize strategically leads to the capability to actualize compellingly. Think reconfigurable. Think integrated. Think dynamic. But don't think all three at the same time. It may seem improbable, but it's realistic! If all of this seems unimagined to you, that's because it is! We pride ourselv

es not only on our one-to-one feature set, but our newbie-proof administration and easy configuration. A company that can incubate easily will (someday) be able to productize faithfully. Imagine a combination of OWL and PGP. Our feature set is second to none, but our user-centric all-hands meetings and non-complex use is constantly considered a remarkable achievement. We also specialise in non street-legal performance-enhancing modifications. Page admins
Sean Waye
Matthew Waye

Over the last three weeks we've been putting together a brand new 3 axis plasma table with all the fruit. This machine i...
20/08/2023

Over the last three weeks we've been putting together a brand new 3 axis plasma table with all the fruit. This machine is a clone of the machine we built 4 years ago with the addition of a water table and torch probing. After this one, I'm thinking a CNC tube cutter!

Calibre Components 2.5 Hydraulic Power Steering Rack.We are ready for our first production run. Ideally we would like to...
17/05/2023

Calibre Components 2.5 Hydraulic Power Steering Rack.

We are ready for our first production run. Ideally we would like to get a genuine number of orders to give us a better gauge on batch numbers. If you are at all interested in placing an order for a rack, please let us know by messaging the page, emailing [email protected] or phone 0427528644
PRESALE AVAILABLE NOW $3000

Tech Specs.
Cylinder: 63.5mm
Travel: 117mm
Ratio: 1.5:1
Input Spline: 3/4 x 36
Steering Linkage Mount Threads: M12x1.75
Hydraulic Port Threads: M14x1.25
For use with a Howe hydraulic control valve (servo)

Keeping ourselves occupied with a set of gravity cast polyurethane moulds for an old school Mazda RX2 centre bearing. CN...
05/04/2023

Keeping ourselves occupied with a set of gravity cast polyurethane moulds for an old school Mazda RX2 centre bearing. CNC machined on our new CNC mill. Not bad for first parts off the machine..

We have one of our power steering racks in a buggy locked and loaded ready for the 2023 season. This will debut at the J...
06/03/2023

We have one of our power steering racks in a buggy locked and loaded ready for the 2023 season. This will debut at the Jamalka event near Tumby Bay. We are hoping for exceptional performance from the unit and looking forward to feedback from the driver.

Picked up this bad boy today. This thing is an absolute hamburger with the lot! Huge shout out to David from Marion auto...
08/02/2023

Picked up this bad boy today. This thing is an absolute hamburger with the lot! Huge shout out to David from Marion automatics for building this beast up for our 4wd truck.

One of our rear drive boiz looking to hit the track soon.
15/11/2022

One of our rear drive boiz looking to hit the track soon.

Been a few weeks completing customer projects, but we're back into the trucks and charging ahead with aluminium panels, ...
11/10/2022

Been a few weeks completing customer projects, but we're back into the trucks and charging ahead with aluminium panels, interior parts, cooling systems, steering and will be making a start on driveshaft components next.

Helping a mate out today with a cage update on a sprint car.
28/08/2022

Helping a mate out today with a cage update on a sprint car.

We're looking for a prototype tester. We have been developing an Australian made 2.5 inch power steering rack for off r...
20/08/2022

We're looking for a prototype tester. We have been developing an Australian made 2.5 inch power steering rack for off road buggies or trucks that we need some real world testing data on. If you're interested in working with us to finalise the development please email us at [email protected] or private message the page. A key condition of application is that we are able to get real test data asap. To go onto a currently competing vehicle. We will also consider selling the unit outright if anyone is interested.

One of our 2wd trucks going together a treat.
19/08/2022

One of our 2wd trucks going together a treat.

23/06/2022

Bit of Thursday night CNC machining..

Proudly Australian designed and built! Calibre Trucks by Waye Engineering.
12/02/2022

Proudly Australian designed and built! Calibre Trucks by Waye Engineering.

Address

Morphett Vale, SA
5162

Website

Alerts

Be the first to know and let us send you an email when Waye And Waye Engineering posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category