Vintage Truck Supplies

Vintage Truck Supplies Parts Manufacturer and supplier to the Vintage Truck and Car Restoration market. Postage to most Countries Worldwide at buyers cost.

Pickup available after being previosly organised.

G'day Restorers, Maybe someone can help John find his dads Fargo.From John to me-"G'day Brad, it would be good to finall...
16/07/2026

G'day Restorers, Maybe someone can help John find his dads Fargo.
From John to me-
"G'day Brad, it would be good to finally locate the old truck after all this time.
The basic info is that it is (as far as I know) are 1934 Fargo with MN 305 numberplate. 3 tonne, petrol motor, 6 cylinders.
It was used to cart stores to my parents shop at Mt Ida, from Kalgoorlie, mainly for the goldmines there but also the adjacent sheep stations.
Dad (David Evans) was a prospector and miner on the WA goldfields, mainly at Kurnalpi, and Comet Vale, a small town south of Menzies, where they lived for 3 years. He used to take the locals to the dances at Menzies on the truck.
They then moved to Kalgoorlie in 1948, after buying a large block there. He mined beryllium at Spargoville south of Coolgardie, where the truck was used to cart the beryl to the railhead at Kalgoorlie, for despatch to the USA. The truck was used for many purposes, including sandalwood operations. It sometimes carted up to 5 tonnes to the railway station in Kal.
It must have done many hundreds of thousands of miles before being sold when Dad passed away in 1967. It used the same numberplate MN 305 (Menzies) all its life.
I would hope that it's been refurbished and has a good home.
John, Busselton, WA. 0427 121 122.

*New Stock* Bedford MS & ML 1939-53 2-3 ton, Rear Hub Seals in stock. Click to learn more.
15/07/2026

*New Stock* Bedford MS & ML 1939-53 2-3 ton, Rear Hub Seals in stock. Click to learn more.

Replacement Rear Wheel Hub Seal suits Bedford M Series Trucks. This seal fits either Left or right Hand side. CLICK to see exact models this fits.

We have points back in stock for International Trucks including C-line & D-line after Manufacturers pulling the plug on ...
14/07/2026

We have points back in stock for International Trucks including C-line & D-line after Manufacturers pulling the plug on that part number.

These Very High Quality West German made Points are just the thing to get your Truck running tip top. See Below for Exact model Fitment-

*New Stock* Dodge & International 'Heavies' Rear Wheel Cylinder Assembly 1-5/8" Bore".Dodge AT4 & D5N- 500, 600 & 700 se...
09/07/2026

*New Stock* Dodge & International 'Heavies' Rear Wheel Cylinder Assembly 1-5/8" Bore".
Dodge AT4 & D5N- 500, 600 & 700 series,
International AB, C & D Line ACCO 1600 & up.

A New Wheel Cylinder Assembly To Suit the Heavier Model Dodges and International Trucks Fits Both Left & Right Hand Sides, It has 1-5/8" Bore. There are usually two of these cylinders per wheel, so if you need two or four buy four. This price listed is for just One.

08/07/2026

And here's the link to our new Petrol/ Fuel Pump for Austins and Morris Commercial with the offset bolt on fl**ge.

08/07/2026

Introducing Austin and Morris Commercial Full replacement Fuel Pump. Will fit Loadstar, WE, WF, 303, 304, FE, FFK, FG, All with 2.2 4 cyl. or 4.0 litre 6 cyl petrol engines using the Type U- AC Pump.. which is basically all those listed and more.
Find it @ www.vintagetrucksupplies.com.au

Have you had troubles calling us? Here's why, our phones went down last week. Telstra repaired them. Then they went down...
08/07/2026

Have you had troubles calling us? Here's why, our phones went down last week. Telstra repaired them. Then they went down a day later, Telstra repaired again, then they went down again... why you may ask? You won't believe it.
Some Oxygen thief has been cutting the phone lines in our area in an apparent attempt to steal the copper wire out of the ground!!! 🥴😳😳. Some people shouldn't walk amongst us.
We are back up now, very sorry if you've had problems.
Cheers

G'day Restorers, can any 6 cylinder International Engine owner help me please? I need to know what size and how many Wel...
04/07/2026

G'day Restorers, can any 6 cylinder International Engine owner help me please? I need to know what size and how many Welch Plugs of each size. Important to know all, even the ones at the rear and any concealed on the front of the engine. I will provide a free set to you if you can help. Thanks.

Happy Saturday Restorers. Hope you are enjoying your day. Happy 4th of July to our U.S. friends, 250 years of independen...
04/07/2026

Happy Saturday Restorers. Hope you are enjoying your day.
Happy 4th of July to our U.S. friends, 250 years of independence. Have a great day.

*New Parts* 8 new Carby gasket kits I've had made in Au. 🇭🇲. So these are just gaskets and sealing ring washers, no need...
03/07/2026

*New Parts* 8 new Carby gasket kits I've had made in Au. 🇭🇲. So these are just gaskets and sealing ring washers, no needle & seat or diaphragms (l have full kits too). Simple kits for cleaning out your Carb where you don't need to waste money on the expensive bits that often don't need replacing. I already cover most Zenith & Solex butnow have kits for carbs fitted to many American & Aussie built brands, International KB, L, AA & AR, AS series, Willys jeep, Ferguson tractor, Dodge, Plymouth, Diamond T, Federal, GMC & White Trucks 1939-1960👌🤠🇭🇲 hitting the website soon.

Address

Putty Road
Milbrodale, NSW
2330

Alerts

Be the first to know and let us send you an email when Vintage Truck Supplies posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share