ScanGauge Australia

06/08/2026

06/08/2026

New ScanGauge X-Gauges for Mitsubishi MV Triton 🚗
- DPF Soot Load
- Engine Oil Temperature

✅ Verified on Mitsubishi MV Triton
✅ Expected to work on other 2024+ models
✅ Recommended for: towing, touring, off-road driving, general driving
✅ Supported on ScanGauge3 (via X-gauge Auto Scan > Mitsubishi)
▶ ScanGauge2 manual entry needs further feedback

Keep an eye on DPF data and engine oil temperature in real time — vital data for general driving and anyone towing, touring, or tackling off-road tracks.

20/07/2026

The old boy in town — and he’s still got it.

Over 20 years on the market, the ScanGauge2 has been tried, tested, and trusted by drivers across Australia. No fancy tech — just a rock-solid unit that’s stood the test of time.

Compact enough to sit right on your dash, tough enough to handle daily driving, and packed with over 15 OBDII digital gauges + additional X-gauges to keep you dialled into what your vehicle’s really doing. Coolant temp, trans temp, EGTs and more!

Engine data, real-time fuel economy, trip stats, and fault code reading — all in one small, durable unit.

The ScanGauge2 is a great example of a quality engineered product that has stood the test of time.

Drive with confidence.

14/07/2026

Running a 24V heavy diesel rig? Your factory dash isn’t telling you the full story. 🚛

Compatible with most heavy diesel trucks running J1939 or J1708 — Kenworth, Mack, Volvo, etc.

The ScanGauge-D and ScanGauge-KR plug straight into your truck’s diagnostic port and give you 15+ live gauges, 5 trip computers, and instant engine fault code reading — all the vitals your dash doesn’t show, right in front of you.

🔧 ScanGauge-D — built for heavy diesel trucks, buses & earth-moving equipment
🚚 ScanGauge-KR — made for professional drivers, with real-time profit/loss tracking for long-haul & fleet ops

Up and running in under 5 minutes.

02/07/2026

New ScanGauge X-Gauge: ATF (Transmission Temperature) for the SsangYong Musso 🚗

✅ Verified on 2026 SsangYong Musso
✅ Works on ScanGauge2 & ScanGauge3
✅ Expected on earlier auto Musso models

Thank you to our customer Noel for the testing and feedback! 🙌

24/06/2026

Scangauge. Plug in. Power up. Real-time data for every drive.

06/05/2026

ScanGauge. The data you need. The confidence you want. The adventure you came for.

30/04/2026

Know what’s happening under the bonnet — in real time.

The ScanGauge3 plugs into your OBD port and gives you live engine data, fault code scanning, trip tracking, and custom gauges, all in one compact device.

Stay in control. Every time.

20/04/2026

Check out this ScanGauge2 setup installed in a Toyota LandCruiser 200 Series.

This customer is monitoring key vehicle data including:
• Transmission temperature (ATF)
• Coolant temperature
• Torque Converter Lock (TCL)
• Battery voltage

Having access to this sort of data is extremely useful when towing caravans, driving off-road, or general 4WD touring.

The ScanGauge2 & ScanGauge3 vehicle monitors plugs into your OBD2 port and displays real-time engine data while you drive.

Learn more 👇

19/03/2026

Most factory dash’s show limited info..

But your vehicle has a lot more data hidden inside the OBD2 system.

With ScanGauge, you can monitor critical engine data in real time:
✅Transmission Temperature (vehicle specific)
✅Coolant Temperature
✅Fuel economy & engine data
✅Read and clear fault codes

It plugs straight into your OBD2 port and shows information your factory dash doesn’t.

Perfect for 4WD touring, towing, and daily driving across Australia.

👉 Would you monitor the above data if your vehicle could show it?