Road Sport Race Engineering

Road Sport Race Engineering We carry out servicing and repairs to all makes of vehicles @ competitive rates and as we are locate

We carry out servicing and repairs to all makes of vehicles @ competitive rates and as we are located in the peel region

17/10/2025

GSXR 400 GK71B non standard discs test fitment for clearance

Hello everyone the store appears to be up and running now. It has a basic selection of stock but we are going to be addi...
30/11/2023

Hello everyone the store appears to be up and running now. It has a basic selection of stock but we are going to be adding more relevant stock soon but have a look here https://rsr-engineering.myshopify.com and if you have any suggestions for stock or how we can improve let me know

22/11/2023

At the moment I am just building a online store not much in there at the moment and I don't think is online yet but here is the link rsr-engineering.myshopify.com all products will have been used or tested by me or my family for quality

Have a read of this we need to stop the BANKS telling us what to do
17/09/2023

Have a read of this we need to stop the BANKS telling us what to do

Without coins and notes, unaccountable banks can know everything we’re spending. Is that good?

26/07/2022

Bought a stereo from Ozproz and not working they asked for a video of the stereo not outputting audio so posted it here for them to have a look

08/09/2020

we have made the correct exhaust manifold now since COVID19 started i have decided to paint my car so at the moment i am painting it i will upload some pictures and video later

hi everyone I just got a KESS V2 master version www.alientech-tools.com/en/kessv2 OBD2 engine programming tool with tita...
06/07/2018

hi everyone I just got a KESS V2 master version www.alientech-tools.com/en/kessv2 OBD2 engine programming tool with titanium software that will allow me to reprogram all engines through their OBD2 ports so if anyone has a car that I can reprogram with it let me know

KESSv2 allows you to read and write the ECUs of cars, bikes, trucks, tractors and boats simply connecting the tool to the diagnostic port.

over the Easter weekend we looked after Dicks CVs while dick was in hospital for surgery so between looking after Custom...
04/04/2018

over the Easter weekend we looked after Dicks CVs while dick was in hospital for surgery so between looking after Customers and doing jobs we assembled my engine ready for doing some more analyzing of the camshafts and my flow rates ran the cams through LOTUS Engineering (Lesoft Software) and Cam analyzer software to get some advance and re**rd values on the raw data we collected in the dummy assemble the data was only just the cam values with no timing belt fitted now with the belt fitted we can see if we can get the adjustment we need to get the values that give me the best Power(BMEP) and fuel consumption(BSFC) from the lesoft dyno pulls we ran on the computer more calculations and modeling to do but the bottom end is now closed up and the oil pump modified for AN10 hoses

25/03/2018

just watching the F1 go, Daniel Ricciardo, I do not think the Halo is a good idea! was only implemented because of the drivers association anyway with self-driving cars who need's drivers anyhow about time the technology got tested as all the other technology got tested under race conditions and in a safe environment

just put some gauges into my car and repaired a Volvo 850 the gauges look good now is to assemble the engine I have modi...
21/03/2018

just put some gauges into my car and repaired a Volvo 850 the gauges look good now is to assemble the engine I have modified the oil pump so I can put the remote oil filter on in case no one knew the pump fell off the engine and broke the oil filter mounting boss so I ordered one from the states but that was a scam got my money back glad I used my Mastercard has protection on all transactions

Me and my friend Dick at Dicks CVs repaired a XR8 Tickford Falcon the factory is so slack that they do not put grease in...
23/02/2018

Me and my friend Dick at Dicks CVs repaired a XR8 Tickford Falcon the factory is so slack that they do not put grease in the axles and they work rust so this job took 2 days and 2 workshops and 3 presses to remove without damage to the components the whole job should have taken no more than about 3 hrs to do what a pain th the # # # # # # all was good once things came apart and the customer is very happy with the job but the car was stuck on the hoist one message i have for car companies spend the 20 cents on grease it would make our jobs easier thanks

Address

Mandurah, WA
6210

Opening Hours

Monday 7am - 6pm
Tuesday 7am - 6pm
Wednesday 7am - 6pm
Thursday 7am - 6pm
Friday 7am - 6pm
Saturday 7am - 6pm
Sunday 7am - 6pm

Website

Alerts

Be the first to know and let us send you an email when Road Sport Race Engineering posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Road Sport Race Engineering:

Share