AAA Exhausts and Fabrications

AAA Exhausts and Fabrications Exhaust and Fabrication

Operating as usual

18/01/2022
AAA Exhausts and Fabrications

Vdj79 duel can child restraint s in stock, Australia wide Compliancing under LK6 code , all 3 anchor points are central to child seat locations unlike other brands , available from our online store or call 07 49526331

Exhaust and Fabrication

Another load of vdj79 child restraint s loaded up for freight
15/01/2022

Another load of vdj79 child restraint s loaded up for freight

14/01/2022
AAA Exhausts and Fabrications

Another superior engineering coil conversion getting fitted to a vdj79 complete with a 4t gvm

#aaafab
#coilconversion
#superiorengineering

Exhaust and Fabrication

12/01/2022

Y62 in for a twin 3” into single 3.5” cat back exhaust

More air boxs and snorkel s getting ready to be freighted to their new owners
10/01/2022

More air boxs and snorkel s getting ready to be freighted to their new owners

More air boxs and snorkel s getting ready to be freighted to their new owners

Twin 3” 304 stainless steel exhaust getting fabricated , this is fully tig welded and uses all stainless steel mounts an...
10/01/2022

Twin 3” 304 stainless steel exhaust getting fabricated , this is fully tig welded and uses all stainless steel mounts and v band fl**ge sets

AAA re open tomorrow tuesday the 11-1-22, If your in need of repairs , parts , etc please message our page or call after...
10/01/2022

AAA re open tomorrow tuesday the 11-1-22, If your in need of repairs , parts , etc please message our page or call after 7:30 am tomorrow 4952 6331 . Thanks and have a great year

AAA re open tomorrow tuesday the 11-1-22, If your in need of repairs , parts , etc please message our page or call after 7:30 am tomorrow 4952 6331 . Thanks and have a great year

Photos from OutbackArmour's post
05/01/2022

Photos from OutbackArmour's post

Snorkel s , air boxs and suspension ready for packing and then off to be fitted to more beastly 4x4 around Australia
13/12/2021

Snorkel s , air boxs and suspension ready for packing and then off to be fitted to more beastly 4x4 around Australia

Snorkel s , air boxs and suspension ready for packing and then off to be fitted to more beastly 4x4 around Australia

AAAFAB have Cnc mandrel bent stainless steel 4” exhausts available for dpf equiped single and duel cabs and pre dpf duel...
13/12/2021

AAAFAB have Cnc mandrel bent stainless steel 4” exhausts available for dpf equiped single and duel cabs and pre dpf duel cabs . These systems are available in turbo back with a hpc coated dump pipe or dpf back with a bolt in adapter to allow for turbo back at a later date. 5 available before Christmas. Please call 49526331 or order online.

Old school mustang in for a twin press bent exhaust to keep it looking as close to its era as possible
07/12/2021

Old school mustang in for a twin press bent exhaust to keep it looking as close to its era as possible

N80 in for a aaafab Cnc mandrel bent stainless steel snorkel
07/12/2021

N80 in for a aaafab Cnc mandrel bent stainless steel snorkel

N70 hilux fitted out with aaafan Cnc mandrel bent snorkel, alloy air box with vdj200 filter
07/12/2021

N70 hilux fitted out with aaafan Cnc mandrel bent snorkel, alloy air box with vdj200 filter

4” tail pipe ready for pickling , packing and dispatch
07/12/2021

4” tail pipe ready for pickling , packing and dispatch

4” tail pipe ready for pickling , packing and dispatch

Duel duel cabs with duel snorkels AAA Exhausts and FabricationsAaafab
05/12/2021

Duel duel cabs with duel snorkels

AAA Exhausts and Fabrications
Aaafab

Duel duel cabs with duel snorkels

AAA Exhausts and Fabrications
Aaafab

No shortage of Cnc mandrel bent stainless steel tube s ready for production
01/12/2021

No shortage of Cnc mandrel bent stainless steel tube s ready for production

No shortage of Cnc mandrel bent stainless steel tube s ready for production

More Cnc mandrel AAAFAB snorkel s ready for power coating
30/11/2021

More Cnc mandrel AAAFAB snorkel s ready for power coating

More Cnc mandrel AAAFAB snorkel s ready for power coating

Blocked add blue injector from a truck exhaust
18/11/2021

Blocked add blue injector from a truck exhaust

Blocked add blue injector from a truck exhaust

AAAFAB 4” hpc coated dump pipe and npc clutch for this 79
18/11/2021

AAAFAB 4” hpc coated dump pipe and npc clutch for this 79

A few photos of the single 4” into twin 4” shorty
04/11/2021

A few photos of the single 4” into twin 4” shorty

04/11/2021

AAAFAB turbo back 4” 304 stainless steel single into twin shorty system for a vdj79 duel cab . Complete with a hpc coated dump pipe , 4 bolt 304 grade fl**ges and mounts

Available for delivery Australia wide

#aaafab
#aaaexhausts
#79serieslandcruiser

Npc clutch kit and an outlaw4x4 exhaust fitted to this hilux
27/10/2021

Npc clutch kit and an outlaw4x4 exhaust fitted to this hilux

A few muffler s that customers have dropped off to have remade
25/10/2021

A few muffler s that customers have dropped off to have remade

Vdj79 in for a superior engineering hand brake upgrade and a brake booster and braided lines . Stops like a beast and st...
25/10/2021

Vdj79 in for a superior engineering hand brake upgrade and a brake booster and braided lines . Stops like a beast and stays where it stops now

New pair of muffler s and stacks supplied and fitted on this kennworth
20/10/2021

New pair of muffler s and stacks supplied and fitted on this kennworth

Coil conversion looking the goods
19/10/2021

Coil conversion looking the goods

Coil conversion looking the goods

Vdj79 intake pipe ready for packaging
14/10/2021

Vdj79 intake pipe ready for packaging

Vdj79 intake pipe ready for packaging

Superior engineering billet alloy upper control arms for a np300 ready for fitting this week
11/10/2021

Superior engineering billet alloy upper control arms for a np300 ready for fitting this week

Pre rego coil conversion going in to a vdj79 duel can
08/10/2021

Pre rego coil conversion going in to a vdj79 duel can

05/10/2021

Another superior engineering 4T GVM 79 series pre rego coil conversion getting fitted this week
#aaafab
#superiorengineering
#aaaexhaustandfabrications
#79coil

Had this vdj79 in after dpf failed , the dpf internals melted it was that hot , all the sensors also melted. Was a std t...
30/09/2021

Had this vdj79 in after dpf failed , the dpf internals melted it was that hot , all the sensors also melted. Was a std tune with a dpf back exhaust

Superior engineering 2” suspension lift on this 200 series , this kit is one of 3 to be fitted this week, 2 have 2.0 sho...
29/09/2021

Superior engineering 2” suspension lift on this 200 series , this kit is one of 3 to be fitted this week, 2 have 2.0 shocks and the third has 2.5” remote ress shocks

A new stainless steel cooling pipe we fabricated to replace the cracked cast pipe
29/09/2021

A new stainless steel cooling pipe we fabricated to replace the cracked cast pipe

A new stainless steel cooling pipe we fabricated to replace the cracked cast pipe

20/09/2021

General workshop cleaning , unpacking of stock , packing of products to send on freight , preparation of snorkels and exhaust s . This position will lead to the correct person gaining welding and exhaust fabrication experience as your knowledge and skills grow .

Address

13 Executive Drive
Mackay, QLD
4740

We are behind Blackwoods on Diesel Drive, keep following it past and look left you will see us, second lot on the left!

General information

AAA Exhaust and Fab, started out 9 years ago, as a small Exhaust shop, bought by Jason after a lengthy stretch out the Mines as a Fabricator Boilermaker running his own boily truck, AAA Exhaust and Fabrications is a Locally owned Family business, And in the Past 9 years have progressed into not only one of the Leading Vehicle Modification workshops, from standard to full on but also a fully established fabrications workshop also, as all our staff are either Tradesmen or Apprentices, we strive for the highest quality work, at a decent price!!!!

Opening Hours

Monday 6:30am - 5pm
Tuesday 6:30am - 5pm
Wednesday 6:30am - 5pm
Thursday 6:30am - 5pm
Friday 6:30am - 5pm
Saturday 8am - 12pm

Telephone

+61749526331

Alerts

Be the first to know and let us send you an email when AAA Exhausts and Fabrications posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to AAA Exhausts and Fabrications:

Videos

Nearby autos & automotive services


Other Automotive Parts & Accessories in Mackay

Show All

Comments

Vdj79 duel can child restraint s in stock, Australia wide Compliancing under LK6 code , all 3 anchor points are central to child seat locations unlike other brands , available from our online store or call 07 49526331
Another load of vdj79 child restraint s loaded up for freight
Another superior engineering coil conversion getting fitted to a vdj79 complete with a 4t gvm #aaafab #coilconversion #superiorengineering
Y62 in for a twin 3” into single 3.5” cat back exhaust
More air boxs and snorkel s getting ready to be freighted to their new owners
Twin 3” 304 stainless steel exhaust getting fabricated , this is fully tig welded and uses all stainless steel mounts and v band fl**ge sets
AAA re open tomorrow tuesday the 11-1-22, If your in need of repairs , parts , etc please message our page or call after 7:30 am tomorrow 4952 6331 . Thanks and have a great year
Snorkel s , air boxs and suspension ready for packing and then off to be fitted to more beastly 4x4 around Australia
AAAFAB have Cnc mandrel bent stainless steel 4” exhausts available for dpf equiped single and duel cabs and pre dpf duel cabs . These systems are available in turbo back with a hpc coated dump pipe or dpf back with a bolt in adapter to allow for turbo back at a later date. 5 available before Christmas. Please call 49526331 or order online.
Old school mustang in for a twin press bent exhaust to keep it looking as close to its era as possible
N80 in for a aaafab Cnc mandrel bent stainless steel snorkel