Full Lock Auto Mackay

Full Lock Auto Mackay Full Lock Auto, provides quality custom fabrication and caters to your performance automotive needs. Full Lock Auto, provide quality custom fabrication and cater to your performance automotive needs.

Operating as usual

Mirror image GTX3582 Gen 2 turbos back from @mdsfab after receiving the T51R mod treatment 🤤🤤
05/06/2021

Mirror image GTX3582 Gen 2 turbos back from @mdsfab after receiving the T51R mod treatment 🤤🤤

Quick one from a few weeks ago,Diagnose and replace of a failed clutch slave cylinder on this gorgeous GTS
03/06/2021

Quick one from a few weeks ago,
Diagnose and replace of a failed clutch slave cylinder on this gorgeous GTS

Tim's 13B turbo powered Mazda 808 wagon back in for more modifications.- Electric water pump conversion featuring -16AN ...
02/06/2021

Tim's 13B turbo powered Mazda 808 wagon back in for more modifications.

- Electric water pump conversion featuring -16AN braided lines, and a Davies craig electric pump mounted underneath for that clean look.

Hypertune   producing the goods for the R32 yet again! - Custom made radiator with PWR core and all AN fittings.- 100mm ...
14/05/2021

Hypertune producing the goods for the R32 yet again!
- Custom made radiator with PWR core and all AN fittings.
- 100mm thick GTR style intercooler with Wiggins style clamps.
- 4" Alloy Coolant bleeder tank.

MoTeC  M150 ECU package for this lucky Subaru BRZ!
12/05/2021

MoTeC M150 ECU package for this lucky Subaru BRZ!

Jordo's R33 received its final touches and off for a tune, can't wait to see it on the dyno.
03/05/2021

Jordo's R33 received its final touches and off for a tune, can't wait to see it on the dyno.

Delivery day from @hypertune_aus 😍😍
24/03/2021

Delivery day from @hypertune_aus 😍😍

CA18DET swapped Ke20 Corrolla in the build, should be a fun little street car.
07/03/2021

CA18DET swapped Ke20 Corrolla in the build, should be a fun little street car.

CA18DET swapped Ke20 Corrolla in the build, should be a fun little street car.

Photos from Full Lock Auto Mackay's post
29/01/2021

Photos from Full Lock Auto Mackay's post

Feeling shifty...
22/01/2021

Feeling shifty...

New turbo for the FC RX7 #13b
12/01/2021

New turbo for the FC RX7

#13b

LS Turbo seems to be the flavour of the month, this one in for some tidy aluminium cooler piping,  mods to existing exha...
08/01/2021

LS Turbo seems to be the flavour of the month, this one in for some tidy aluminium cooler piping, mods to existing exhaust to suit bigger turbo and ofcourse a bigger turbo 🤘

Our order from CPC - Custom Plenum Creations  has arrived for the R32 and Ke20, and they are nothing short of works of a...
07/01/2021

Our order from CPC - Custom Plenum Creations has arrived for the R32 and Ke20, and they are nothing short of works of art.

Thanks for all the pre and post sale support mate. You are a legend.

We can't wait to open this work of art from @customplenumcreations more presents for the R32!
24/12/2020

We can't wait to open this work of art from @customplenumcreations more presents for the R32!

Stan's chevy Silverado 3500, we completed a few weeks ago, - 5" front lowering kit (2"drop spindles, 3" drop springs)- N...
19/12/2020

Stan's chevy Silverado 3500, we completed a few weeks ago,
- 5" front lowering kit (2"drop spindles, 3" drop springs)
- New front ball joints,
- 7" Diff flip lowering kit,
- Remove and outsource 4l80e rebuild and then refit,
- Custom Stainless 3" twin system exhaust,
- Tailshaft overhaul,
- PWR trans cooler and Spal fan.

Thanks for bringing her to us mate hope you enjoy!

Some more pics of Lee's beautiful VL turbo, that we fitted with;- Ported & polished head,- Oversized Valves,- Nitto Perf...
31/10/2020

Some more pics of Lee's beautiful VL turbo, that we fitted with;

- Ported & polished head,
- Oversized Valves,
- Nitto Performance Engineering Headgasket,
- ARP Headstuds,
- Crow Cams Australia Pty Ltd TX3 custom grind camshaft,
- JPC Adjustable Cam gear and Billet Rocker Arms,
- Link ECU Xtreme Wire in ECU,
- PowerTune Digital Digital Driver Display,
- Mako Motorsport Dash Insert,
- Rajab Racing Developments Intake Manifold,
- Custom made Tailshaft,
- Wilwood Disc Brakes Brake Master Cylinder

Ford diff shortened 260mm and converted to leaf springs to suit the little CA18DET KE20 Corolla, Fab work all done in ho...
31/10/2020

Ford diff shortened 260mm and converted to leaf springs to suit the little CA18DET KE20 Corolla, Fab work all done in house, thanks to All Paint Solutions for the awesome job on the blast and Paint. ✌️

A few small fab jobs we've completed in between our larger projects 👌👌
28/09/2020

A few small fab jobs we've completed in between our larger projects 👌👌

Tim's immaculate 13B-T Mazda 808 in for a custom 3" SS exhaust and 2.5" Alloy intercooler piping.While we had the car we...
11/08/2020

Tim's immaculate 13B-T Mazda 808 in for a custom 3" SS exhaust and 2.5" Alloy intercooler piping.
While we had the car we had the custom one piece Tailshaft made, front windscreen replaced, and some other various small jobs.

Can't wait to see this little rocket on the streets, with the trans-braked 3 speed auto it should be the perfect street/strip car.

We had Lee's BF MK2 XR6T in for a T51R modded compressor cover, and we fitted his new FG coil cover that he had painted ...
12/06/2020

We had Lee's BF MK2 XR6T in for a T51R modded compressor cover, and we fitted his new FG coil cover that he had painted with a candy violet colour, sounds and looks awesome.

We recently had the joy of working on Braydon Wishart's F6 yet again, This recently saw 1016 HP on 36psi @ 6700 RPM on t...
02/06/2020

We recently had the joy of working on Braydon Wishart's F6 yet again, This recently saw 1016 HP on 36psi @ 6700 RPM on the run in tune through the TH400 (no lockup in convertor, which cost us power) But there is more to come in the future.

**Video of Dyno pull in comments.**

Massive thanks to David Sheehy and Jayson Scott at CPV Tuning for their work on the tune,

Daniel Leppien from Tuna Performance for his help with the tune and the Haltech ECU.

Luke Hendry from Hendry's Performance Engines for the engine build and first start up support.

While we had the car we;

- Re-fitted the freshly built engine,
- Sent the Garrett GT47 Front housing away to TURBOMOD.Pro to have the T51R modification completed,
- Carried out the TH400 Conversion,
- Supplied and fitted a whole array of parts incl;
- Atomic Billet Chrome Moly Flexplate with ARP Flywheel Bolts,
- Custom made tailshaft,
- Complete new Transmission cooler setup,
- Siemens 2400cc Injectors,
- Haltech Elite Pro Plug-In ECU, with 4.9LSU Wideband,
- Individual EGT Sensors welded onto the 6Boost turbo manifold,
- Motorsport Oil Pressure Sensor,
- Flex Fuel Sensor,
- Fuel Pressure Sensor,
- plazmaman.com Pro Billet intake manifold with Billet fuel rail,
- plazmaman.com Billet surge tank with triple Pierburg external fuel pumps,
- plazmaman.com 1800HP Intercooler,
- Walbro 525 In-tank Fuel pump,
- Custom made in-house Alloy intercooler piping,
- Battery Relocation to the boot,
- Fuse box relocation (credit to Mackielec Industries for the idea.)

We recently finished up another round of modifications to Connor's Supercharged SV6 Ute.- Ethanol content sensor install...
31/05/2020

We recently finished up another round of modifications to Connor's Supercharged SV6 Ute.

- Ethanol content sensor install,
- Camaro ZL1 fuel pump upgrade,
- Snow Performance progressive water methanol injection,
- Intake manifold spacer,
- Custom alloy intercooler pipe into throttle body.

Thanks for bringing her back to us again mate and as always I hope your happy with the finished result.

Another job from 2019, we Had Darcy's S15 Silvia in for a much needed clutch upgrade, the factory dual mass organic clut...
02/01/2020

Another job from 2019, we Had Darcy's S15 Silvia in for a much needed clutch upgrade, the factory dual mass organic clutch was definitely not up to the job anymore so we fitted a made to order NPC 500kw rated clutch kit which also utilises a billet single mass flywheel
This clutch is extremely bitey, but still retains a close to factory pedal feel. We hope you enjoy driving your pride and joy again mate, and thankyou for trusting us with her. 😁

A rush job we had in for a customers Nissan Silvia S15, custom made Stainless Steel 3" exhaust (only half of the system ...
31/12/2019

A rush job we had in for a customers Nissan Silvia S15, custom made Stainless Steel 3" exhaust (only half of the system pictured,) ready in time for him to make the Dyno.
Utilising quick release V-band clamps to aid in ease of fitting and removal, it came up a treat.

2019 was our busiest year yet and the level of cars we are getting through the shop is just getting more and more amazin...
30/12/2019

2019 was our busiest year yet and the level of cars we are getting through the shop is just getting more and more amazing, Thankyou to all of our loyal and supportive customers without you we wouldn't be here and going into this new year looking forward to working on more amazing builds like this!

Scott brought in his beautiful 1970 Ford Mustang at the recommendation of a friend of his, This car has been in the build for over the last 12 months with nearly every part brand new or refurbished, Scott has put his Blood, Sweat and no doubt Tears into this build and we were more than ecstatic to be apart of this beautiful creation.

We made a custom Twin 2.5" Stainless Steel exhaust system with symmetry and ground clearance in mind and think we did an outstanding job, we hope your happy with it mate and Thankyou so much for trusting us with your baby.

We recently had this Mazda Bravo B2500 4x4 in for a clutch, rear main seal replacement, and new front CV shafts. Came up...
30/12/2019

We recently had this Mazda Bravo B2500 4x4 in for a clutch, rear main seal replacement, and new front CV shafts. Came up a treat and no more slippage.

Set of RB26 Rocker cover baffles ordered in for a customer 😍
09/12/2019

Set of RB26 Rocker cover baffles ordered in for a customer 😍

Brand new NP300 fitted with a fresh outback armour lift kit, adjustable upper control arms, 33's, ironman bullbar and fl...
29/11/2019

Brand new NP300 fitted with a fresh outback armour lift kit, adjustable upper control arms, 33's, ironman bullbar and flares to suit the wheels 👌
Thanks to Remote Touring Solutions for the help getting this big girl sorted and out the door on time to suit the customers schedule 💪

Boot mounted surge tank to suit E85, came up a treat 💪
25/11/2019

Boot mounted surge tank to suit E85, came up a treat 💪

We had Andrew's Mazda 626 in for a 13B peripheral port conversion, we modified the OEM gearbox crossmember to suit the F...
24/11/2019

We had Andrew's Mazda 626 in for a 13B peripheral port conversion, we modified the OEM gearbox crossmember to suit the FC manual gearbox, custom intake manifold to suit the Weber 48mm IDA carbie, custom exhaust using twin 2" into single 3" over the diff, custom made 1 piece tailshaft, plumbed the fuel system, completed the wiring and overhauled the suspension system to ensure a safe ride.

We recently had Luke and Sue's gorgeous '65 Fastback in again for a full Carb rebuild and tune, we also rebuilt the C6 a...
20/10/2019

We recently had Luke and Sue's gorgeous '65 Fastback in again for a full Carb rebuild and tune, we also rebuilt the C6 automatic transmission after a major failure losing 1st gear, due to a friction disc and steel in the low gear clutch pack welding themselves together the rest of the gearbox was also showing its age as you can see by the image of the band showing a lot of wear and heat damage.
While we were in there we had a shift kit fitted to the valve body for upgraded shift pressure and a quicker shift to reduce wear and slippage between gears.

Hope you guys are enjoying having your pride and joy back again, and thankyou again for being patient and your constant support. 😁

We love getting positive feedback and photos of our work in use! Glad you guys are happy with it. 😁
15/10/2019

We love getting positive feedback and photos of our work in use! Glad you guys are happy with it. 😁

Big thanks to Full Lock Auto Mackay for our new polisher rack, looks mint bikkies 👌 better than that wooden contraption we had before 🙄

Link Monsoon Install from last week, can't even tell it's in there 😁 this little turbo beast will be even more of a rock...
25/09/2019

Link Monsoon Install from last week, can't even tell it's in there 😁 this little turbo beast will be even more of a rocket ship now it has more safety and sensors all wired into the ecu. 👌

Did someone say straight pipe? 2.5" Stainless steel exhaust for this little 1.8L turbo, using Stainless V-band clamps fo...
24/09/2019

Did someone say straight pipe?
2.5" Stainless steel exhaust for this little 1.8L turbo, using Stainless V-band clamps for ease of fitting and removal and no need to replace gaskets!
This thing sounds amazing, not long now and it will be dissapointing people around town 😍

Some quick turbo modifications over the weekend 😍
24/09/2019

Some quick turbo modifications over the weekend 😍

Address

6 Hayes Lane
Mackay, QLD
4740

Telephone

0457585347

Alerts

Be the first to know and let us send you an email when Full Lock Auto Mackay posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Videos

Nearby autos & automotive services


Other Motor Vehicle Companies in Mackay

Show All