Jonny Tig

31/03/2026

Congratulations to our awesome customer Peter Cro. Debuting his new build on ADHDVN. Running one of our vertical flow cooler systems and straight into a new PB of 8.29 @ 169mph. Be in the 7s real soon. Well done Peter, congrats again and well done to all involved.
Cant wait to see how deep into the 7s you go. Catch up soon mate 🤙🤙

28/03/2026

We are extremely proud to congratulate our apprentice, Jake Palmer, on his outstanding achievements at last night’s ATEC Awards in Adelaide.
Jake was named 4th Year Metal Fabrication Apprentice of the Year, and went on to receive the prestigious Apprentice of the Year – Overall Winner across all trades.
With hundreds of finalists across multiple industries, this recognition is a testament to Jake’s dedication, skill, and commitment to excellence in his trade.
At Jonny Tig, we take great pride in supporting and developing the next generation of tradespeople, and Jake’s success reflects the high standards we strive for every day.
Jake came to us just into his second year from another company which had pretty much given up on him and he wanted out. We saw alot of talent that just needed some honing to achieve what he has tonight!!
We couldn’t be prouder to have him as part of the Jonny Tig team. The future is looking very bright mate — well deserved!

Congratulations, Jake — a well-earned and exceptional achievement. Its been an honour to have you on this journey ❤️ Well done mate 👊👊👊

👏🔥

25/03/2026

Good to see the JT equiped PSR ute cruising Florida 🤙🤙

We put ⁨ from in the Pulsar Turbo Barra-powered ute at Summernats USA… and things got loose.Cruising Summernats USA wi...

10/03/2026

🔥427LS Twin Turbo HQ🔥

Andy had his nice HQ build in for some serious love. Running a built LSX we started out with one of our infamous 3000hp intercoolers to suit the twin G42 1450 turbos. Typically TT guys like a vertical flow but we dont see the best results due to short tube lengths and fab our horizontal flow to suit these set-ups with drastically cooler intake temps over a vertical flow. Bit of a struggle getting it all to fit behind a recessed HQ grille but came up killa. We fabbed an extruded tube radiator to suit in our package. Along with custom JT turbo manifolds, 3.5 Dumps with WG plumb back for engineering. With a couple of G42 1450s this thing will be making some good power. I would like to thank Lucas and Jake for the countless hours spent on this job. You guys rock 💪💪 Looking forward to seeing you at the track Andy. Thankyou for trusting us with your build and opportunity to work on your beautiful HQ 👍

15/02/2026

Anyone after a fast barra, good customer and friend selling their 8sec BF. Bargin. Get on it 👌

Up for sale is my pride and joy i have owned it for over 10 years car was standard, 125km on shell. Car is religiously looked after and maintained. This car is not for the faint hearted and would suit buyer that has built cars in the past and know what they cost and is wanting to get back into something fast without having to build something, jump in and drive.

- Built motor 3000km old. Forged rods, pistons, Factory crank, billet oil pump housing and gears, Ported head, oversize valves stage 5 crow camshafts, ARP head and main studs, Plazmaman intake, G42, jonny tig exhaust manifold, Fenix radiator, 2200cc injectors.
- Haltech ecu with ic7 dash, innovate gauges and autometer gauges.
- Th400 1500hp rated with transbrake, derale trans cooler with fan, 1 piece tailshaft.
- Billet DSS driveshafts shafts, Viking drag rear shocks, adjustable camber arms, 3.46 gears locked centre diff.
- Jonny tig big cooler, cooler pipe clamps.
- Nitrous (only when using transbrake)
- Surge tank in boot with braided fuel lines front to back, holley fuel reg.
- Engine oil cooler with braided lines.
- BF 17 inch wheels refurbished to like new condition.

Made just over 1000hp on 40psi Has run a 8.70 @ 159mph has went 162mph. 1.2 in the 60ft. Only seen about 8 full passes since the refresh on the new motor.

https://www.facebook.com/marketplace/item/2993950407660331/

03/02/2026

Had Reuben's Barra XE in for some JT love. Fabbing and fitting one of our 3000hp intercoolers with 3.5" piping. Dump etc etc. Once we modified and moved radiator back etc these massive coolers pretty much fall in. Came up nice. Will be a car to watch for this year. Thankyou for trusting us with your build Reuben. Keen to watch ya at track. Big improvement over your last setup.....

JT FTW 👊👊👊

25/01/2026

Congratulations Brenton taking out the win in rolls last night. Bloody hot day!! That big arse cooler we built must been doing its job lol. Killa job Millsy Madaz Torana on the awesome tune and build. Well done brother, you deserve it

JT FTW 💪💪👊👊👊

03/12/2025

Well done lads 💪💪

21/11/2025

🔥Suzuki Jimny Turbo Kit🔥

Conners Jimny with our JT Turbo Kit all bolted up and off for tuning. Running a baby Pulsar Turbo Australia internally gated snail coupled with our new gen 4 cooler up front and full 3" Turbo back exhaust. Also one of our JT snorkels plumbed up to our JT airbox for fresh air. Looking forward to seeing results once tuned. Thankyou for trusting us with your car Conner. Sounds amazing. Update on the tuning shortly along with some powder coating🤙

18/11/2025

JT coolers getting it done 💪 Matthew Bolgers TT LS VL we had the pleasure of working on a lil while back. Needing a better intercoling solution from the vertical flow he was previously running. We designed a solution using one of our 3000hp horizontal flow units. Took some nutting out but the results were definitely worth it. Looking forward to watch that PB drop. Will post some pics of the setup later. Thankyou for trusting us with your car Matthew and Avondale Body works 💪

04/11/2025

Big congrats to all my awesome customers on Drag Challenge aswell as everyone else!! Well done lads 💪💪 Im sure i have missed a heap of pics out, so many running my products these days. You guys all know who you are! Been good times helping you all achieve some killa goals. Also big congrats to Mark in the Madaz Torana coming in second place in 6cyl class! Shae coming 4th in the 8.50 class in his turbo LS HZ! Well done 👊 See you all on the Challenge next year. Well done again everyone 🤙🤙🤙