Carl Mills Stainless Steel Repairs

09/06/2026

Good morning again from the Guru..
Just a short video on, just some of the smaller detail needed to be done ,to complete the customers trims..cheers Carl.

04/06/2026

02/06/2026

Short week, but still used the weekend to get these Valliant parts cleaned up repaired and polished up, and ready for the anodising ...

31/05/2026

Hi folks, short 2 day week this week ..off to 😎 cooly's festival for a break..

28/05/2026

End of last week i completed a roof garnish off a MACK truck, needed 10 holes welded up ,a few bits of damaged areas to get out, as well as a total polish up.

28/05/2026

Onto Darren 's Valiant, aluminium trims, getting these all repaired ,polished and away to be re anodised, before starting the remaining stainless steel trims ,hopefully getting them all completed, all around about the same time..

22/05/2026

Hi to all just wondering if there's anyone out there thats in need of a set of
1972 Grande Ford Mustang has caps...
These are for sale, and are in pretty good condition, make a reasonable offer, add a bit of postage, and they can be yours ok....cheers Carl

21/05/2026

Doing the restoration on a H/TGK grille for a local customer,, really, really time consuming , after the stainless trim was restored, the paintwork needed refreshing, its the 2 colours ,but the masking up and remaking for the 2nd colour, then the unmasking .... was the time consuming part on this grille..in all it has turned out really nice..cheers Carl

17/05/2026

Last week was had, finishing off Erik's Thunderbird stainless trims..to complete his job...

06/05/2026

25 years ago I restored and repainted my 59' chrysler.. back then there was no "so called APOXY primer" to cover up bare steel prior to filler work.. so im redoing the inner skirts and a few small areas on the firewall, just to tidy it up again.. a fair bit of panel stripping back to bare steel, a clean up and a few coats of apoxy before ill tidy up again and freshen up the engine bay again..
I'm just taking a few days off my Stainless Steel Repairs , and work on my own car.... to get this engine bay sorted out, plus new air compressor to be fitted up, and regassed...should be all done and back together, and ready for this years cooly's 😎 festival , scroll on through for a look , cheers Carl