Neep Automotive and Performance

12/10/2026

UPDATE -

At this time there is will be a pause on Gerrard taking on any new bigger jobs.

Gerrard will always attempt accommodate your needs, but he may not always have the time or space to take on last-minute changes or jobs that are larger than originally anticipated. So we ask that when you book in you discuss in detail what you are seeking.

At this time Gerrard is not able to take on any more engine rebuilds beyond what is already booked in and confirmed or is in the workshop already.

Your understanding with this is appreciated.
We thank you for your support.

Send a message to learn more

16/09/2026

The blue Holden 6 with triples has had the camshaft broken in, I’ve balanced the carbs and set the timing, idle and mixtures. Now to give it back to the owner to fit.

11/09/2026

What’s better than 1 Holden 6, well it has to be 2.
The blue one I didn’t build I’m just finishing off for a customer runs an Ivan Tighe cam, big compression, big port head, ICE Ignition and a beautiful set of 45mm Webers to round it off.
The other one is my turbo 6 which I’ve almost finished building, running big port low compression head, forged pistons, crow solid cam, cometic head gasket, ICE Ignition with boost re**rd and of course TO4 turbo and Weber to match. Still need to finish the sump, and oil feed/drain lines and a few other minor things then it will be time to fit it back in the car to start the exhaust and plumbing.

28/08/2026

It’s been busy for me over the last month we’ve just completed this 56 2 door amongst all my other jobs.
This job included fitting a Holley sniper fuel injection system, removing the old tank and fitting a custom 90 litre tank with in-tank pump, having the exhaust modified to fit with the larger tank.
Once that was done new polished rocker covers were fitted and a new throttle bracket and lokar cable fitted to make the it a much smoother transition on the throttle.
Once again thanks goes to David McPharlin for all his help where 4 hands are better than 2.

14/08/2026

To all my valued customers we will be closed for business from Monday 17th of August and reopening Monday 24th August

03/08/2026

If you’re after a good entry level distributor for a SBC I now stock these Tc Performance & Race Engines units to suit flat tappet camshaft they do require a coil to work but can supply if needed $330.00 each +coil
Also have back in stock now Tc Performance & Race Engines 4150 throttle brackets ( black only )
$75.00 each
I currently have 6 in stock

03/07/2026

This was a big job, take everything from a rusty WB statesman including engine, trans, diff, power steering and all the braking system including booster and pedal and fit it all into the HQ that’s after removing all of its 6 cylinder running gear first. Before fitting I had to strip the engine and repaint in correct colour for the era, we also had to remake brake lines as the WB had metric fittings, convert from manual to auto and a million other little things as we went.
Must say the final result was worth it and looks so much better and with a bit more added power now

01/07/2026

Well today we reached a milestone the little Datsun 1600 fired into life. Would just like to thank Nathan from Racewire Tasmania for building the loom to make the Haltech happy and working his magic to make it run safely before a final tune. David from Deemac Speed and Custom for his ongoing fabrication work and help and Mark from Austin’s Electrical for all the other wiring and electrical parts.
We still have a few things to do but it now runs and drives and getting closer to the finish line.

22/05/2026

To all my valued customers, we will be closed from the 25th of May and reopening on June 1st
I will not be contactable during this time

27/04/2026

WORKSHOP CLEAN UP
Ok the time has come for a bit a clean out of excess parts and tools, if you see anything you’re interested in give me a call or message me during business hours and I’ll give a price.
Still more parts to go through so I’ll add as I go.
68 Camaro taillights
68 Camaro factory radio
68 Camaro 4-1 Doug’s extractors
Ls1 coil packs x8 secondhand
Summit trolley jack 1000kg x 1
Chrome salt flat mags 17x9 and 17x7 suit Chevrolet 5x5 pcd
Torqueflite 727 b&m 2500 stall converter brand new
Holden red v8 2 barrel intake
Brand new 20 litre air cannon bead seater
Holden polished vk injection manifold, computer, wiring loom and fuel pump
12 port blue motor head
Holden red lightened flywheel and heavy duty clutch
Holden 308 2 piece extractors possibly commodore vb-vk
SBC into torana / hq boxed sump
Vb-vk tail shafts 1x6 cylinder 1xV8 big uni
6 cylinder blue motor block 40thou over
Small fold up flat bed trailer, registered 12 months rego good condition