https://www.facebook.com/369467379809714/

Performance Carb Tuning

Home
Australia
Landsdale, WA
Performance Carb Tuning

Performance Carb Tuning can tune your carburetered street car or race car, we also supply & tune supercharged or turbo charged blow thru carbs.
(1)

From a basic tune to a complete engine build we can do it all.

06/10/2023

After owning this car for over 15yrs it's time for something different.
Description in photos
Msg me for any serious enquiries.

23/03/2023

Been a little quiet here lately so here's a nice SBF to kick things off.
Craig's 450ci XF all ready for some fun on the street.
Running a Dart block, Callie's Crank , Oliver Rods, Diamond Pistons, a set of Higgins heads and intake with a very lazy street friendly camshaft and a set of Bushed Bam lifters. It should make for very low maintenance street friendly fun.
Hopefully one day we get to up the cam and put a better set of headers on it and see what it can really do!

23/03/2022

Ben's XW all finished up with its new combo.
434ci SBF with Dart Block, Callie's Crank, Oliver rods, Custom 12.6:1 Wiseco nitrous pistons, custom nitrous cam, Higgins small port Heads and matching intake.
Custom Direct port nitrous setup using Annular nozzles.
We went with a Holley 4500 stealth with 8 injectors and Holley HP ECU to control everything and Holley dash to display everything.
Can be run on 98 for street cruising and E85 for having some fun.
All tuned by Jeff Johnson.

Should make for a lot of fun times ahead!

19/11/2021

Michael's Procharged XY back in to sort out a few oil leaks , upgrade to dual needle and seat bowls and a touch up on the tune .

27/08/2021

Had the pleasure of going through Paddy's 565ci HQ Monaro over the past few months.
After a lifter issue at the last Powercruise Paddy asked me to go through the entire combo and see what we can do.
We kept the same block, Jesel Rockers, belt drive setup and cylinder head castings but changed everything else.
Now running:
Callie's magnum crank
Oliver rods
Custom Diamond pistons 13.6 comp
Custom SHP comp solid roller
BAM bushed .904 lifters
Jesel belt drive
AFR345 heads ported by SPE
Edelbrock intake ported by SPE
2" headers with a 3.5" stainless system done by Lurch's Custom Fabrication.
Now also running Holley stealth 4500 with Terminator X ECU on E85 tuned by Jeff Johnson of course.
All through a Shotgun Performance T400 and Dominator Converter.
We also gave it a little spray of course 💦

Definitely a tough street car 💪

23/07/2021

Deno's new 427ci all done and ready to put some km's on it before dyno.
This is a nice pump gas combo with a Dart SHP block, S**t rotating assembly with a set of JE pistons.
It's got a set of CHI 225 heads with matching intake and a Crane street roller cam topped off with an APD 950cfm carby.
Nice combo that can be cruised all day and pack some punch when needed.

16/07/2021

Just some of the nitrous motor's I'm currently putting together .
All E85 combo's , one carby , one port EFI and one 4500 throttle body EFI and all running Holley ECU'S.

572ci BBF
565ci BBC
448ci SBF

15/06/2021

Michael's XY in for a tune with 410ci SBF Windsor and F1R Procharger with one of my custom 950cfm E85 carbys.
Making some good power but unfortunately maxing out a single needle and seat bowl at 770hp so will be left there for now.

20/02/2021

Nice old school 355ci VK we've been building for Santana is nearly ready to hit the track.
Santana wanted to stay with the old Holden 5ltr instead of going the LS path so we built a nice strong 355ci with 4 bolt mains, S**t crank and rods, JE pistons, Higgins cnc ported iron heads, Crane solid roller, Edelbrock intake topped with an APD Billet carby on E85.
We also added a nice little 150 shot of gas.
Trans is a Hughes T400 and TCE converter.
Definitely looking forward to seeing what we can get out of this and having some fun.

11/02/2021

Nice 427ci XR on the dyno today for the guy's at S&E Automotive.
Very tuff combo that would be a lot of fun and very reliable.

Address

Unit 5/116 Furniss Road
Landsdale, WA
6065

Website

facebook.com

Alerts

Be the first to know and let us send you an email when Performance Carb Tuning posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Performance Carb Tuning:

Shortcuts

Want your business to be the top-listed Autos & Automotive Service in Landsdale?