Seven Automotive

Seven Automotive Seven is here to provide all your automotive needs
Servicing-Performance Upgrades-Tyre Sales-Wheel Alignments Fabrication-Parts
[email protected]

EQUIPMENT SALE !!Tufflift 3.7 ton 2 post hoist $2000 ( cost $ 3490 new ) ( SOLD pending )Tufflift 4 ton 4 post alignme...
08/03/2018

EQUIPMENT SALE !!

Tufflift 3.7 ton 2 post hoist $2000 ( cost $ 3490 new ) ( SOLD pending )

Tufflift 4 ton 4 post alignment hoist with rolling air jack $ 4000 ( cost $ 6,990 new )

Hofmann Geoliner 610 3D wheel aligner with tilt head option , comes with computer and printer $ 9500 ( cost $15,389 new )

Workmate tyre changer with arms and wheel balancer ( will come with a large range of wheel weights and accessories )
$ 1200 ( cost $3000 new )

Will sell the aligner and 4 post hoist together for a cheaper price

There is a whole range of other workshop tools and smaller equipment like trans jacks and engine stands but they will be posted up later on

All equipment was purchased brand new in june 2016 and installed by Tufflift and Logicar and can provide original invoices

Prices are neogitable to an extent but no time wasters please

Hoists and aligner will need to be removed by a professional only at your cost unless an agreement is made in the price

All purchases will come with an invoice from Seven automotive , cash or card is accepted

any questions feel free to send a message

Thanks
Scott

06/03/2018

Thank you for everyone's support yesterday , to the people who have messaged regarding prices on the equipment ill write up a list and some prices today and post it up and reply to the messages

Thanks

Scott

05/03/2018

Hey Guys,

A Hard decision was made recently to close down Seven Automotive. We want to thank you all for the support over the time we have had the business open and we hope you all the best.

At this stage ill be closing up at the start of April but will be in and out of the shop until the end of May .

Keep an eye out on the page as ill be putting up a for sale post with abit of equipment/tools and stock , and will likely have some sort of big tool/stock sale on a saturday, if you're interested
in any of the big equipment like ( wheel aligner / hoists / tyre machine and balancer ) send the page a msg or give me a call on 9769 1529 if not keep an eye out and ill put up some pictures

Thanks once again to all the customers and friends that have helped out along the way it means a lot

Regards ,

Scott

12/02/2018

Sorry to anyone that tried calling today , iv been extremely busy today and will be over the next few days so please leave a message on the answering machine or send a message via facebook and ill do my best to get back you asap

Regards
Scott

Pete from Drift Cadet came down this morning to get a wheel alignment and some help fitting up the JDI Fabrication proto...
08/02/2018

Pete from Drift Cadet came down this morning to get a wheel alignment and some help fitting up the JDI Fabrication prototype front knuckles , LCA's and Caster arms to try out at Vicdrift matsuri this weekend

We had to modify some little bits and pieces along with using some temporary tie rods to work out the right length but thats all apart of the early prototype stages

Keen to see how these go over the weekend and what fine tuning needs to be done to get it perfect but looks good so far

Good mate Nathan dropped his 180SX off to get some stuff fixed up before an upcoming skid pan day The castor rod bracket...
04/02/2018

Good mate Nathan dropped his 180SX off to get some stuff fixed up before an upcoming skid pan day

The castor rod bracket had completely snapped through the mounting point so we removed and had to fix up some other bits to get the new one to mount up then gave it a wheel alignment

Along with swapping out a driveshaft that had split a boot we also gave it a service and changed over a faulty TPS

Ryan's SR32 was back in the shop This time round we swapped out the Naprec valve springs for BC springs after it was hav...
24/01/2018

Ryan's SR32 was back in the shop

This time round we swapped out the Naprec valve springs for BC springs after it was having valve float issues on the dyno at high rpm, upon futher inspection we noticed that the naprec springs were wrong and shorter than a factory/bc spring

Along with some new adjustable cam gears and lifters

We also fitted up a new Taarks oil filter block along with a new oil cooler kit and filter relocator

Back on the dyno today at Chequered Tuning

Matt's S1 S14 in for a service aswell as check over after noticing some leaks he had One of the copper washers on the tu...
24/01/2018

Matt's S1 S14 in for a service aswell as check over after noticing some leaks he had

One of the copper washers on the turbo water lines was leaking along with a split rear rocker cover breather hose

All fixed now and ready for pickup

Tim's clean and simple WRX came in for it's 25,000k service
24/01/2018

Tim's clean and simple WRX came in for it's 25,000k service

Another customer's R32 GTR done and tuned ready for pickup 😀Brand new Nissan GTR gearboxGarrett -7 turbos Tomei dump pi...
16/01/2018

Another customer's R32 GTR done and tuned ready for pickup 😀

Brand new Nissan GTR gearbox
Garrett -7 turbos
Tomei dump pipes
Nismo fuel pump
Nismo injectors and adjustable fuel reg
Nismo clutch and flywheel
Nismo air flow meters
Nissan clutch master and booster
New Nissan gaskets for turbo side
Genuine fluids
Greddy profec b boost controller
12v relay setup for fuel pump

Then tuned by Chequered Tuning

Keep an eye on the page for some more updates of some other big jobs we have in at the moment

Another one from the end of the year was a set of new ID1000s injectors and perrin intake pipe for this AVO turboed FT86...
10/01/2018

Another one from the end of the year was a set of new ID1000s injectors and perrin intake pipe for this AVO turboed FT86 thats been in the shop a few times for various upgrades

Sam's FD RX7 came in during the last few weeks of last year to get some goodies fitted up New Haltech elite 2500 with wi...
10/01/2018

Sam's FD RX7 came in during the last few weeks of last year to get some goodies fitted up

New Haltech elite 2500 with wideband
Greddy intercooler kit
Along with fitting up his new Gram light wheels

Address

2/5 Olive Grove Keysborough
Keysborough, VIC
3173

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+61397691529

Website

Alerts

Be the first to know and let us send you an email when Seven Automotive posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category