MezzaTronics

25/02/2023

This is the only way to properly test an AGM/Deep cycle or lithium battery.

Constant load over time at either a C5, C10 or C20 rate. These two batteries tested good with a quick battery test. The left one has 28Ah capacity, the right still getting tested.

Now I’m a bit concerned as the batteries aren’t that old and the charging/cutoff system is working fine.
They do hold their surface voltage very well up until they just die.

If you want a battery tested properly I can load test any system up to about 50A constant and 66A maximum short time test. I can only test 12V batteries currently.

01/11/2018

28/09/2018

Wiring up a to an engine control box

26/09/2018

4wheeldrive Canopy setup with redarc battery management system

26/09/2018

Out with the old in with the new

23/03/2018

Easy tool less trailer wiring solution. Fully waterproof, no soldering required (unless you need side lights).

The plug can be changed rather than using an adapter, the plugs also have a magnet for sticking it on the side of the trailer.

This is a new item on the market and everything is plug and play with connectors colour coded.

Includes 2 tail light assemblies, number plate light & 3 interchangeable trailer adapters (7pin flat, large round & small round)

There is also a 21ft version as well (doesn’t include side lights)! I can splice these in at requested lengths!

Reasonably priced, text or inbox me for a price.

23/02/2018

Video of system in operation! (Photos in post below on my site)

A recent installation in a Mazda BT50 of a Polaris in dash navigation/multimedia system with Hema maps, front camera and caravan camera.

23/02/2018

A recent installation in a Mazda BT50 of a Polaris in dash navigation/multimedia system with Hema maps, front camera and caravan camera.

Only photos in this post, Video to follow.