Lee Killen Automotive and Servicing

29/10/2021

Certificate awarded to Chad for 9 years of service

29/10/2021

Today marks the day.....the final clean 🧹🧹

20/10/2021

It's all go now.
Check it out!!
Please share

Lee KIllen Automotive is a household name and Repco authorised agent in Hamilton Known for his professionalism, attention to detail this business is simply ripe for the picking Conveniently located in 2 modern sheds close to Industry & the CBD with ample parking Currently over 1000 active clients on...

13/10/2021

The time has come to thank each and everyone of you for your continued support of the past 9 years while running Lee Killen Automotive & Servicing.
This is to inform you that as of next week the business will be for sale.
It was a dream of mine when I started with $200 in my pocket and a jack to grow my business to where it is now. What a ride it has been, I am extremely proud of what I have achieved, but for work life balance and my mental health the decision has been made to sell up.
The business has grown beyond working by my self and doing everything alone.
We will continue to work with what is booked in but will not be taking on any more work. The doors will be shut as of the 1st of November 2021.
I have accepted a position at Taylor Motors as a senior technician and encourage you to book in with them. You will receive the high-quality work ethic you have grown to know and attention to detail when it comes to your vehicles.
Once again, I can’t thank you enough for the way you have all helped grow Lee Killen Automotive & Servicing.

Thank you
Lee , Lauren & Chad Killen

25/08/2021

Good luck to Aaron Kennett Racing up in Darwin this weekend

19/08/2021

This 'walker' has done a few Km's and was in for a seized brake this morning.
The boys were all over it.

13/08/2021

Lucas Slick Mist
Detailing Kit
$73

Includes
Interior Detailer 710ml
Tire & Trim Shine 710ml
Speed Wax 710ml
Microfibre Towel
No mess Tire sponge applicator

Shoot a message or drop out and see us to purchase

14/07/2021

•● P E N R I T E C L E A R S C R E E N●•

In stock at Lee Killen Automotive and Servicing
25ml - 1 off bottle
250ml - multiple use bottle

25ml treats 2.5ltrs

Clear Screen concentrate is a highly concentrated cleaning additive for the windscreen washer unit. It removes dirt and smearing films from the windscreen.

Clear Screen concentrate rapidly removes dirt, mineral dust, exhaust gas residues and rainwater deposits from windscreens. Oil soot, insects, silicone, grime and traffic film are removed in seconds and wiper blade action is smoothed. Tolerant to paintwork, rubber and plastics.

25/06/2021

WHY YOU NEED AN HPD CATCH CAN

An HPD catch can is one of the simplest and most effective accessories you can fit to a turbo-diesel engine.

To meet ever-stricter emissions regulations, manufacturers of diesel engines have used Exhaust Gas Recirculation (EGR), which diverts sooty exhaust gases back into the engine to be burned again, reducing particulate emissions.

The engine breather pipe sends air from inside the crankcase into the intake as well. The fine oil mist in this air combines with the soot from EGR to form a sticky deposit that builds up to the point that it affects the breathing of the engine, clogs EGR valves and jams turbo actuator flaps.

This buildup can occur very quickly – in some cases less than 60,000km – requiring expensive intake cleaning that is not covered by warranty.

HPD has tackled this problem with our catch can. The catch can is an oil/air separator that is mounted between the breather and the intake. Its four fine stainless steel mesh filters capture the fine vapour before it gets to your intake, reducing buildup over the life of the vehicle.

Precision-made in Australia from billet aluminium, HPD catch can kits come complete with laser-cut brackets, silicon hoses and all clamps and fasteners needed to complete a factory-look fitment. The oil reservoir has a dipstick for easy monitoring of the oil level, and unscrews for easy emptying when required. The mesh filters need no maintenance and never need replacing.

Installation is an easy DIY task for the home mechanic or enthusiast, with comprehensive fitting instructions and simple, bolt-up fitting, or it can be quickly and cheaply done by any mechanic while your vehicle is being serviced.

There are specific kits to suit dozens of popular models of 4WD and commercial vehicles, as well as a universal kit that can be fitted to any turbo-diesel engine.

The HPD catch can does not vent to atmosphere, so it is compliant with Australian Design Rules. Any catch can with a pressure relief valve does not meet ADRs and is not legal to use on the road.

10/06/2021

●• C O N T A C T T R A C I N G •●
Scan QR code on your phone
OR
Use our Lee Killen Auto kiosk to check in

If your here for 5 min or an hour PLEASE make sure you check in.