Dead Trend Fabrication

Call Directions Contact the business

Dead Trend Fabrication Custom fabrication in the motorsport field. Working with stainless, chromoly, and even titanium. Doing work that is more out of the box or unique.

Shortened up a pair of spindles for a toyota crown build. The length reduce by a total of 30mm.
12/12/2021

Shortened up a pair of spindles for a toyota crown build. The length reduce by a total of 30mm.

This weeks adventure. Making rear side windows with ducts, a couple of adapters and a big shroud for an 86 drift car wit...
25/11/2021

This weeks adventure. Making rear side windows with ducts, a couple of adapters and a big shroud for an 86 drift car with a boot radiator setup.

Doing wheel bearings in the r33 gtr. While I was at it I thought getting the hubs vapour blasted would be a good idea. I...
30/08/2021

Doing wheel bearings in the r33 gtr. While I was at it I thought getting the hubs vapour blasted would be a good idea. I wasn't wrong. They turned out amazing.

20mm has been taken out of these adjustable upper control arms for a r34, 4 door. Can't wait to get a few photos back fr...
15/08/2021

20mm has been taken out of these adjustable upper control arms for a r34, 4 door. Can't wait to get a few photos back from the owner of the car after he puts them back in.

Ryan Bykiw

Printing out a sample of the new strut brace that I'm developing # _deadtrend_
16/07/2021

Printing out a sample of the new strut brace that I'm developing # _deadtrend_

Finally finished off the r33 GTR exhaust. Soon enough the car will be back on the road.
11/06/2021

Finally finished off the r33 GTR exhaust. Soon enough the car will be back on the road.

Just completed a oil catch can, washer bottle and overflow tank all in one for this good looking old Mazda.
29/04/2021

Just completed a oil catch can, washer bottle and overflow tank all in one for this good looking old Mazda.

Modified dump pipe for an evo 7 with all the lobster goodness.
19/03/2021

Modified dump pipe for an evo 7 with all the lobster goodness.

Started doing the work on the dump pipe on the GTR. It goes from 3 inch from the back of the turbo and flares up to 3.5 ...
31/12/2020

Started doing the work on the dump pipe on the GTR. It goes from 3 inch from the back of the turbo and flares up to 3.5 inch. Then 2 inch from the wastegate back into the dump pipe.

One out of 4 cooler pipes done for the gtr.
26/10/2020

One out of 4 cooler pipes done for the gtr.

Address

Gold Coast, QLD
4211

Telephone

+61431711493

Website

Alerts

Be the first to know and let us send you an email when Dead Trend Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Dead Trend Fabrication:

Shortcuts

Share

Category