Moto-Fixx

Moto-Fixx We offer full restoration, painting and repairs, engine rebuilds, tyre fitting and balancing, servicing, preventive maintenance, welding and fabrication.

Permanently closed.
No nasty surprises inside engine thankfully. Appears to have actually had very little use.Very little wear on chassis an...
14/03/2022

No nasty surprises inside engine thankfully. Appears to have actually had very little use.
Very little wear on chassis and engine components which is great for whoever buys this once we finish the restoration.
Clutch hub and basket even in very decent shape for being 37 years old.
We will go 1 oversize on piston and have cylinder bored and then replace conrod and all bearings.

Project YZ80N 1985 restoration starts now 😁
13/03/2022

Project YZ80N 1985 restoration starts now 😁

Something a bit different.XS650 in a hard tail frame.Many custom mods already.In for a tidy up of the mufflers, service ...
10/02/2022

Something a bit different.
XS650 in a hard tail frame.
Many custom mods already.
In for a tidy up of the mufflers, service and getting these Mikuni VM34 carbs jetted and balanced correctly.

VFR1200F repairable write off project almost complete. Just need to remove the rear wheel stripes.Frame report tomorrow ...
29/10/2020

VFR1200F repairable write off project almost complete. Just need to remove the rear wheel stripes.
Frame report tomorrow and then VIV inspection next Thursday.

If you want to stop replacing lower head stem bearings, do this mod.Remove the steering stem lock key barrel and cover a...
27/10/2020

If you want to stop replacing lower head stem bearings, do this mod.
Remove the steering stem lock key barrel and cover and fill with a sealant.
No more rusted out lower head stem bearings as water can no longer enter via this unsealed area.
Lets face it, no one uses a head stem lock anyway. Very easily broken if some scumbag really wants the bike and for most bikes after changing hands at leas once, I would be surprised if anyone actually has a key for theirs.

Vespa PX150 project finally has engine built and in frame.
26/10/2020

Vespa PX150 project finally has engine built and in frame.

Project RMX250S HydroBlasting all aluminium parts won’t be happening on this build as broken power valve amongst a few o...
25/10/2020

Project RMX250S

HydroBlasting all aluminium parts won’t be happening on this build as broken power valve amongst a few other unseen repairs have blown the budget so l dragged out the sofa blasting gun today and cleaned up the hubs. Came out to a satisfactory standard.
Makes a mess but dissolved with water so easily cleaned up.

Ouch. Wasn’t expecting a broken power valve. That adds another $350 to the build. 😬
23/10/2020

Ouch. Wasn’t expecting a broken power valve. That adds another $350 to the build. 😬

22/10/2020

RMX250S project linkage and swingarm bearings just a little worn.

Address

Abc
Gold Coast, QLD
4000

Telephone

+61416276110

Website

Alerts

Be the first to know and let us send you an email when Moto-Fixx posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category