AC Engineering Concepts

AC Engineering Concepts AC Engineering Concepts specialising in street rod, muscle car and custom cars. From mild to wild we are dedicated to getting your project on the road.

New work shirts and hoodies got picked up today! Turned out mint, thanks Shirts 247
10/07/2026

New work shirts and hoodies got picked up today!
Turned out mint, thanks Shirts 247

All work on the big block Coronet has now been completed!We had a big list of stuff to get through and the end result ha...
01/07/2026

All work on the big block Coronet has now been completed!
We had a big list of stuff to get through and the end result has come up shmick 👌
Modifications to the cooling system included fabricating the expansion tank and modifying the radiator to suit.
Vacume pump required a breather tank to be fabricated, we tucked that up inside the guard and made all the hoses and hardline to get rid of the unwanted gasses. We also welded some AN bungs to the rocker covers so that it could all be plumbed up neatly.
Relocated the fuel pressure regulator, fitted the Wilson carb spacer and throttle return.
Lastly we fixed the tailpipe that was damaged so it lined up and sealed back to the v-band properly 😎

Been so busy lately that we haven’t been posting much but here is a breather box we knocked up today for a RX7 with 2JZ ...
29/06/2026

Been so busy lately that we haven’t been posting much but here is a breather box we knocked up today for a RX7 with 2JZ 😎
We have shaped it to fit around the strut tower and tuck neatly in the engine bay 👍

Beautiful HX Monaro in for a twin 2 1/4 inch 304 stainless exhaust we completed for Jack's Restoration Rescue.We used v-...
14/06/2026

Beautiful HX Monaro in for a twin 2 1/4 inch 304 stainless exhaust we completed for Jack's Restoration Rescue.
We used v-bands throughout, x-pipe and some Ho**er mufflers to give just the right note.
If you want something like this on your ride get in touch 👍

When it comes to modifying parts for your project, the question should never be why, but take my money!! 😂A couple of AN...
09/06/2026

When it comes to modifying parts for your project, the question should never be why, but take my money!! 😂

A couple of AN fittings welded to the water pump for the shop car, getting ready for the allstars_drag_and_drive 😎

02/06/2026

For those that asked, a little video of how the exhaust on the fairlane sounded, not bad I think for a mild Cleveland 😎
Let us know if you would like something similar done to your ride!

When the wife asks for an exhaust for her fairlane, better make it nice! We have fabricated a dual 3inch 304 stainless s...
01/06/2026

When the wife asks for an exhaust for her fairlane, better make it nice!
We have fabricated a dual 3inch 304 stainless steel exhaust with some Ho**er mufflers. Used v-band clamps to tie it all together. A x-pipe has also been added instead of the old H-pipe. All tig welded and tucked up tight for max ground clearance 👌
So much better than the previous twin 2 1/4 system with the exhaust valves I never liked!
The new exhaust has really woken up the 351 Cleveland and will be a blast cruising around Cooly Rocks On this week 😎
Get in touch if you are looking for a similar exhaust set up.

Long overdue exhaust upgrade for our Fairlane in full swing! Just in time for heading down to Cooly Rocks On next week 👍
27/05/2026

Long overdue exhaust upgrade for our Fairlane in full swing! Just in time for heading down to Cooly Rocks On next week 👍

Another job on the big block Mustang finished!The owner requested a new transmission mount so we delivered!
18/05/2026

Another job on the big block Mustang finished!
The owner requested a new transmission mount so we delivered!

Headers for the big block Mustang are all finished up!These were a huge amount of work, but all the effort has paid off ...
17/05/2026

Headers for the big block Mustang are all finished up!
These were a huge amount of work, but all the effort has paid off as they come out killer! 👌
We started with some nice stainless header flanges and had to flare some 2 1/4 304 stainless pipe to make them fit.
We used a total of 30 90 degree bends and 5 metres of straight pipe to get them done 😳
If you want some custom headers done for your ride, get in touch and see what we can do for you 😎

Address

Glass House Mountains, QLD
4517

Opening Hours

Monday 8am - 4pm
Tuesday 8am - 4pm
Wednesday 8am - 4pm
Thursday 8am - 4pm
Friday 8am - 4pm
Saturday 9am - 12pm

Telephone

+61408416665

Website

Alerts

Be the first to know and let us send you an email when AC Engineering Concepts posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category