P&L Cycles

24/09/2026

🔧 A QUICK WORKSHOP UPDATE 🔧

Firstly… THANK YOU! 🙌

We honestly can’t thank everyone enough for your continued support, patience, recommendations and for trusting us with your bikes. We never take it for granted.

As most of you know, James is currently our only mechanic, and well… we are officially BOOKED OUT for major work for the rest of 2026! 😅

For the remainder of the year, we won’t be taking on any more big jobs, rebuilds, major repairs or custom work.

We’d rather be realistic with our workload and give every bike the time and attention it deserves than rush a job just to get another bike out the door. That’s never been how we work, and it’s never going to be.

📅 We have already started taking bookings for 2027, so if you know you have a bigger job coming up, please get in touch early!

BUT… being booked out doesn’t mean we’re not here to help! ❤️

We’ll still always do our best to look after our loyal customers and keep you safe and on the road with:

🛞 Tyres
🛑 Brakes & safety repairs
🚨 Emergency repairs
🏍️ Rego checks
🔧 Minor services / Smaller repairs where we can fit them in
⚙️ Unexpected issues keeping your bike off the road

So please still give us a call if something happens! 📞 If we can squeeze you in and get you back on the road, we absolutely will.

As much as we’d love to clone James… apparently that’s still not an option. 😂

Thank you for sticking with us, being patient when we’re flat out and continuing to support our little family-run workshop. We genuinely appreciate every one of you. 🖤

2026 — MAJOR WORK FULLY BOOKED
2027 — BOOKINGS NOW OPEN 📅

James & Kim
P&L CYCLES 🖤🔧

22/09/2026

04/08/2026

We had the chance to check this neat place out last Friday night for there bike night.

What a place and a great atmosphere. !!

Be sure to keep an eye on their socials to keep up to date for the next one!!!

29/04/2026

Next on the checklist… bearings.
Yep — the quiet achievers that no one thinks about… right up until they decide to clock off mid-ride 😅
Often overlooked, but when a bearing “leaves the chat” while you’re out cruising your hog… things go downhill real quick. And not in a fun way.
Sure, you can do the basic visual checks — but that’s only half the story. Both old-school tapered roller bearings and modern sealed bearings need a bit more attention behind the scenes to make sure everything’s running smooth and safe.
Because let’s be honest…
There’s nothing cool about your ride sounding like a shopping trolley with a bad attitude.

29/04/2026

You’ve checked your tyres. ✅
You’ve checked your brake fluid. ✅
Feeling responsible yet? Good…
But what about your brake pads? 😏
Because there’s absolutely no point having fresh tyres and clean fluid if your brake pads are basically just emotional support.
Harleys aren’t exactly lightweight… they need all the help they can get when it’s time to pull up.
Worn pads = more noise, less stopping, and a mild heart attack at the next set of lights.
👉 Do yourself (and your nerves) a favour — get them checked before they start screaming louder than your pipes.

28/04/2026

Next up on the checklist — brake fluid 👇
Most Harley’s run DOT 4, and it’s something that should be checked at every service — not just topped up, but actually tested for moisture content.

Why? Because moisture in your brake fluid lowers its boiling point, which can lead to brake fade when things heat up… and in worst cases, damage to your ABS unit 💸

This quick test gives us a clear picture of what’s going on inside your system.
Brake fluid should generally be flushed every 2 years, but factors like weather conditions and how/where the bike is stored can speed that up.

👉 Simple check now = avoiding big $$$ repairs later.

27/04/2026

Be honest… when was the last time you checked your tyres? And no, a quick kick in the driveway doesn’t count 😅

Pressures, tread, the lot.
With the cold and wet weather creeping in, your tyres are about to earn their keep.

Do them (and yourself) a favour and check them now—before they decide to let go at the worst possible time.

25/04/2026

We’ve been a bit quiet on socials lately… not because we’ve been slacking—more like we’ve been buried under a mountain of work and questionable life choices 🤣

The workshop’s been flat out, spannering away on everything from fresh jobs to long-term builds that keep on giving.!!

Here’s a quick sneak peek of what’s been keeping us busy 👇
We’ll be dropping more detailed posts on each job over the coming days/weeks—plus a heap more projects we’ve got hiding in the workshop.

Stick around… it only gets bigger & better 🔧🔥