https://www.facebook.com/881710181893623/

Southern Dent and Shine

Home
Australia
Geeveston, TAS
Southern Dent and Shine

Trade qualified with 30 years experience, 10 years+ as owner/tradesman at Southern Dent and Shine Then, at 20 years old now, the rot REALLY sets in.

We exist to provide the restoration services that other shops no longer want to deal with. Rust removal and resectioning of whole pieces is rapidly becoming a lost aspect of the trade. The vehicles we work on are now around the 50 year old mark and older. Fact is that every single one of them is no longer all factory original. They were purchased brand new, loved, insured, pranged and repaired un

der that insurance. Then they were sold second hand, not insured again, a few rust spots appeared and that was quickly fibreglassed over to make it look nice again. The hack work to keep them together up top gets more extensive. Layers and layers of fibreglass, bog and paint hide the reality of a panel that's no longer fit for the job. And the inners they bolt onto are going now too....
That's where Southern Dent and Shine comes in. ANYTHING can be replaced with the skills and equipment, time and of course, money. We will work with you to keep the dream alive. All is not lost for your dream car as long as Southern Dent and Shine exists ✨️

14/05/2026

Astonishing pictures from the NSW Ambulance page of an accident up there earlier this week 😳
Fortunately all involved are, amazingly, still alive.
Moral of the story; not all restoration works result in a safe ride. Looked pretty but, I'll bet!
The last decade has seen these old buses really start to sink into the ground. There's nothing left to bog up anymore in alot of cases, so more and more often we're having to quote for brand new steel to go back into places it just has to go.
These pics completely justify the extensive works we're now undertaking here at Southern Dent and Shine.
Nobody wants their pride n joy showing up on Facey like this!! 😬
Safe driving friends!

27/07/2024

🇦🇺💪WB Statesman Caprice!💪🇦🇺
This poor old girl came to us in a fair bit of disarray for her 45 odd years. Long abandoned repairs sitting under failing old primers and guide coats , dry, dull and flaking old respray coatings dragging everything down, and rust busting out in most of the usual suspects. A rust free boot and badly dented replacement bonnet were her best bits lol.
A simple enough sounding brief; make her presentable, and all the one colour (Corinthian Blue) again.
With pretty tight bugetary constraints foremost in mind, we've used a combination of rust replacement sections to replace some of the worst rust, and some 'creative stabilisation' work to the rest to get her in a far better state to be an enjoyable drive again 🙂
And that's the whole point of it all 👌
All works completed by qualified tradesman Ian Mattice, Geeveston 0400 401 582

20/04/2024

👵🇦🇺 This reeeeal old Aussie 1957 Holden Special station wagon came to us after a couple of false starts elsewhere. Understandable that the last guy noped right outta there after very bravely cutting open the right hand sill cover, she was in a right state!
This old bus needed MAJOR lower structural repair, with underfloor cross members, floor pans, mid and front lower pillars, inner and outer sills and front corners all slowly being lost to rust. Inside, outside...down low everything was going or gone 🤔
All works have been completed using a combination of rust repair sections obtained through the usual suspects, supplemented with some very nice front lower corner assemblys by Stark Automotive (available from Rare Spares). With the odd hand fabricated section to fill in the blanks, reckon up to 3 dozen pieces have gone together to make these floors structurally sound again. Scroll through pics and you'll see how rough she had become just through time 🫣
Now it's a project, not a nightmare, with enough of the hard stuff done for the customer to have a hand in it's completion and actually maybe have some fun doing it lol 😀
All works completed by tradesman Ian Mattice 👍

28/02/2024

Always nice to have visitors at Southern Dent and Shine! Today was the big final reveal of this lil Stag we repaired and resprayed about 2 years ago, before refitting all bolt on parts to latch up for gaps, then returning to the customer for complete fit out. See final 2 pics for how we delivered her compared to now she's all dressed up!👌
Looks awesome. Owner Mal has done a great job with alot of heavy chrome to bolt on, door glass, and a complex interior to deal with, all of it RIGHT up next to fresh fresh paint. Hats off, that can be truly scary stuff, even for us lol 😆
Thanks for bringing her down for a look see Mal, always love seeing them being driven about looking fabulous ✨️😎

26/12/2023

Last replacement panel down for the year at Southern Dent and Shine! A lovely new plenum chamber/dash section for the ol HJ ute we've had in for major rust replacement works.
Started out as always, seeing if we could pick about and get away with just the corners being replaced, but nope. We all know what these things look like now, so off it came in it's entirety. An excellent replacement piece helped massively, dropping straight down neatly following a full clean up and recoatings to the inner chamber section. Suspect a genuine part made it's way to Rare Spares it was THAT good... 🤔 👍
Looks awesome now in primer,, and was the only way to go for longevity.
2023 was a massive year for Southern Dent and Shine, with 30 panels from 3 different vehicles and a whole VL Commodore repaired just over the winter months, it's been hectic.
So stay tuned in 2024, got plenty of pics stored up for some great posts to come of these grouse old buses! 😎👌
Happy 2024 everyone and thanks to all our supporters!

26/08/2023

⚡️The future popped in to Southern Dent and Shine to say hi today! 👋 ⚡️
Our good customer and friend Shaun McPherson popped down to the valley with the family today, in this very fine looking machine, the 2023 Tesla model 3.

Shaun is lead tech for the fledgling Tesla sales and service team that has been established in Hobart quite recently. So we were pretty excited to hear that he'd be coming down to check on his preoject in the customer service loaner car this weekend!

Pretty damn spot on panel and paint, great to walk up on. Crisp body lines, good gaps, nice not-too-peely paint finish, and in a fairly uncomplicated dark charcoal silver shot through with a gorgeous blue violet suspended metallic flake that picks right up in the sun 👌No stoopid add on flourishes, trims, bezels or covers that push repair costs up unnecessarily, and, best of all...completely flat underside. If you've ever had to fix a rusted floor you just know this is a good thing lol.

All in all, for around $70k and to get the f*** away from dependence on fuel...hell I'd buy one lol 👌

19/08/2023

First of the 🇦🇺 Commys to come to us for works! Kinda been expecting one for a bit now haha 😉
We completed all the general panel beating works this VB Commodore required recently, before she goes elsewhere for completion.
For this one we've fitted a couple of pre fabricated rust replacement sections to the plenum chamber and spare wheel well, zipped up a few rust holes round the windscreen apertures, then finished up with metal finished dent repairs round the car before popping works into primer.
All in all, not too many surprises to be found on this one given the age of these buses!
As usual, all works completed by qualified tradesman Ian Mattice, in Geeveston 👍
0400 401 582 or direct message with any enquiries. 🙂

23/07/2023

100% LEGIT, for real and AWESOME OPPORTUNITY on offer!
Anyone keen on a career in the future electric auto industry, this will pair you with both top of the industry training AND with one of the nicest blokes you'll meet, Shaun McPherson. Yes, Tesla technicians will now be based in Hobart, this is absolutely no scam or we wouldn't be sharing lol
Sorry no direct link that's shareable, but the job reference number is right there. And I'm sure Shaun wouldn't mind a DM regarding 😉

07/04/2023

LC Torana floor pan and boot section replacement.
Don't have a whole lot of before pics of the floor in the state it was in when we received it, suffice to say it needed 4 floor pans and 3 sections in the boot to make it all stable again! Full of rust and holes ending up in sad piles of crap and dust on the workshop floor lol.
Major benefit is being able to inspect, clean up and re coat the inner chassis rails when the floors are up, and pre coat the undersides of new sections before they go in.
These are all Rare Spares sections, and as expected, all of them had the ol 'some fitment required' caveat attached haha. They're a better start than flat steel though, so no argument here 😉

17/03/2023

LC Torana fixed plenum chamber rust repair⚡️🧟😬
If you know, you know haha.
These are just plain difficult, and nobody is fabricating them as a full repair sections, only the endy corner bits were able to be replaced. Just getting the thing off nice, clean and in one piece was only the first battle in a fairly protracted conflict lol
Welding so near the hundred odd vent fins was just plain scary too, but it all panned out in the finish 👌

Address

238 Fourfoot Road
Geeveston, TAS
7116

Website

facebook.com

Alerts

Be the first to know and let us send you an email when Southern Dent and Shine posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Southern Dent and Shine:

Want your business to be the top-listed Autos & Automotive Service in Geeveston?