Racer Pro Cylinder Heads

Home
Australia
Geelong, VIC
Racer Pro Cylinder Heads

Racer Pro - Performance Cylinder Heads and Manifolds for Small Block Chevrolet

10/05/2025

Things behind the scenes are progressing slowly with tp racerpro, unlike Chris Vilimovsky hq once it gets its newly freshened heart put back into place, below are the perssonal words from chris regarding what he has been upto,

Big thanks to Con Sagiaris today for squeezing me in on short notice to dyno the freshened up SBC, now a 440 combo. We ran the Efi as it would run in the car with my baseline tune from the 420 as a starting point and tweaked from there. 8 pulls in total to dial it in with the first 7 on QM25. We made 880hp @ 7850 with 640ftlbs @ 6600 with the QM25 with 12 inches of pan vac.

Switched to MS109 and 15 inches of pan vac and we made 900hp @7900 and 645ftlbs.

Didnt get any footage as i was tuning from the side of the dyno cell in real time via my laptop whilst Con was at the console keeping an eye on vitals.

Engine had 600+ ft lbs from 5500 to 8000 where we pulled the engine from💪

Thanks to Johnny Nogas for picking up the fuel for me today👍

Thanks to Michelle Vilimovsky for being so understanding the last couple of weeks whilst i screwed this engine together ❤️

31/12/2023

Not only have we received the 1st batch of 15°and 18° tp racer pro cylinder to go with the 23° and 23° raised port cylinder heads we already have we have also received the jigs and fixtures for them to mount in the machine to get ready and to hope start machining in mid Feb 2024, Will update as progess is happening,
We will have some of these heads at summernats next week for people interest to look at, we will be at booth 5 in the rare spares pavilion, feel free to pop in and check them out

08/12/2023

Exciting times ahead for TP-RACER PRO, first batch of 23° & 23° raised heads have been picked up, and hopefully by end of next week we will the 15° & 18° heads too, machining will now commence early in new year, stay tuned for further updates, alternatively give Craig a call on 0419359143 for any information you would like

05/12/2023

Another racer pro customer sent some info in, Danny's wild twin turbo racer pro 23° headed sbc powered lj torana, so far it's gone 6.83 @ 204 mph

04/12/2023

Had a long time racer pro client send through a pic and some info about his build, the engine is a 374 cube sbc with a racer pro top end package consisting of 18° cylinder heads, matching tunnel ram and racer pro rocker covers, the engine made 629 on pump fuel with and endurance roller style camshaft and behind that is a lenco 5 speed, the car is a Street and strip vehicle, has done some street kms haven’t got it to the track yet, hopefully in the new year,
The combo is in a fb holden ute, overall he is very happy

16/11/2023

Latest update on the TP racer pro cylinder heads, we have castings, this is the first batch of 23° and 23° raised port to begin with, we are hoping we can get some machining done on them before Xmas arrives 🤞, machined or not we with have raw castings on display at Summernats in jan, shows how they all look prior to machining, once we get these all sorted 15° & 18° cylinder heads will be next on the to do list,

10/11/2023

We are getting closer now, things are taking shape now, hopefully we will have castings poured next week, for those with orders they are nearly there for you all, for those who are interested in any of the racer pro products or any other Torque-power performance product feel free to give me a call on 0419359143

31/10/2023

The wait is nearly over, after its been a while but the newly branded TP RACERPRO (formerly racerpro) small block Chevrolet products will be back on the market and available to you, casting will commence on the 23° and 23° raised port next week and hoping to be machining before Christmas, for those that have placed orders already we will contact you closer to availability date, for anyone who is interested in these or any other TP RACERPRO product feel free to contact me on 0419359143

Craig Bennett

29/10/2023

https://www.facebook.com/100064255586257/posts/614464667372047/

Address

Geelong, VIC

Telephone

+61419359143

Website

http://www.racerpro.com.au/

Alerts

Be the first to know and let us send you an email when Racer Pro Cylinder Heads posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Racer Pro Cylinder Heads:

Want your business to be the top-listed Autos & Automotive Service in Geelong?