1320 Motorsports

Directions Website
12/10/2026

Next up in our Powercruise #100 series is Jamie's GMH PSI - a tough twin-turbo LS-powered LC Torana! ๐Ÿ’ช

Another awesome build we've been lucky enough to work alongside, with some serious gear and a great group of businesses involved in putting this weapon together!

Here's a quick rundown of the setup

๐Ÿ”ง 427CI LS built by Warspeed
๐Ÿ’จ Rear-mounted twin Pulsar 3584 turbos
๐Ÿ› ๏ธ Fabrication by Spot On Performance & Fabrication
โš™๏ธ 2-Speed Powerglide
โšก Holley Dominator ECU
๐Ÿ”Œ Wiring by Ash at WTS
๐Ÿ’ป Tuned by Con from WAS

There's something pretty cool about a classic LC Torana packing a big-cube LS and a pair of rear-mounted Pulsar turbos! ๐Ÿ˜Ž

More customer cars from Powercruise #100 still to come

11/10/2026

Next up in our Powercruise #100 series is one of our very own - ESLOCO! ๐Ÿ’ช

If you've seen it in action, you'll know it shreds tyres like there's no tomorrow! ๐Ÿ˜‚

Here's a quick rundown of the setup with some great businesses involved in bringing this thing together!

๐Ÿ”ง 388CI Dart LS built by Swifty's Race Engines
๐Ÿ’จ TBS Billet 8/71 Supercharger
โ›ฝ ProFlo Billet Injector Hat
๐Ÿ’ป Tuned by Tim at ProT Engines & Tuning
๐Ÿ› ๏ธ Fabrication by Elite Fabworks
โš™๏ธ TH400 by OutCast Automotive
๐Ÿ”Œ Wiring by Genwired
โšก Link G4+ Xtreme ECU
๐Ÿ“Š Haltech UC10 Dash & Keypad
๐ŸŒก๏ธ Haltech WB2, NTK & EGT Sensors

Always good getting ESLOCO out for a run, and Powercruise #100 was another chance to have some fun behind the wheel! ๐Ÿ

Need parts or advice for your next build? Get in touch today ๐Ÿ’ช

09/10/2026

Brad's PROTE - a 1200+HP Barra-powered Cortina! ๐Ÿ’ช ๐Ÿ”ฅ

We're kicking off a mini-series featuring some of the customer cars and builds we've been lucky enough to work alongside, captured at Powercruise #100! ๐Ÿ

Built by Allstreet Performance & Fabrication, this thing is an absolute weapon, already running into the 5-second zone over the 1/8th mile on no prep!

Here's a quick rundown of the setup ๐Ÿ‘‡

๐Ÿ”ง 1200+HP Barra on E85
โšก Haltech ECU
โš™๏ธ Powerglide Transmission
๐Ÿ’ช 9-Inch Diff
๐Ÿ Pro Street Radials Tyres
๐Ÿ’ป Tuned by The Hoff at Cleveland Dyno

Awesome to see another car we've been involved with out there getting put to good use!

Need parts or advice for your next build? Get in touch today ๐Ÿ’ช

๐Ÿ POWERCRUISE 100! ๐ŸWeโ€™re sharing a few of our favourites from the event, including some tough cars weโ€™ve had the pleasu...
08/10/2026

๐Ÿ POWERCRUISE 100! ๐Ÿ

Weโ€™re sharing a few of our favourites from the event, including some tough cars weโ€™ve had the pleasure of working on or supplying parts for. Always great to see builds weโ€™ve been part of out being enjoyed!

A big thanks to everyone who stopped by the 1320 stand to grab some gear, chat about their builds or just say gโ€™day. We appreciate the support! ๐Ÿค

Swipe through to check them out, with more photos and videos still to come.

Planning your next upgrade? Shop online or come see us instore.

โ˜€๏ธ SUMMERโ€™S COMING - KEEP IT COOL! โ„๏ธThe warmer weather is on the way, especially throughout Queensland, so nowโ€™s the ti...
06/10/2026

โ˜€๏ธ SUMMERโ€™S COMING - KEEP IT COOL! โ„๏ธ

The warmer weather is on the way, especially throughout Queensland, so nowโ€™s the time to make sure your cooling system is ready for it. Coolant, radiator hoses / clamps and fans are commonly forgotten about so now's the time to get everything ready for the warmer weather.

Whether youโ€™re keeping a street car cool in traffic or preparing your build for the warmer weather, we've got you covered with everything you'll need including:

๐Ÿ”ง Radiators
โ„๏ธ Intercoolers
๐Ÿ’ง Coolant
ใ€ฐ๏ธ Silicone hoses
๐ŸŒ€ Fans & cooling components
โž• Plus plenty more!

Shop online or come see the team in-store and get your cooling system sorted before the summer heat arrives.

Shop the cooling range today - https://www.1320motorsports.com.au/cooling

๐Ÿ”ฅ NEW TO THE 1320 MOTORSPORTS RANGE - BTR LS1 CANTED VALVE HEADS ๐Ÿ”ฅPlanning your next LS build? The BTR CNC rectangle por...
30/09/2026

๐Ÿ”ฅ NEW TO THE 1320 MOTORSPORTS RANGE - BTR LS1 CANTED VALVE HEADS ๐Ÿ”ฅ

Planning your next LS build? The BTR CNC rectangle port canted valve cylinder heads bring a serious upgrade to your top end.

โœ… CNC-ported 250cc cathedral intake ports
โœ… 63cc combustion chambers
โœ… 2.125" intake and 1.590" exhaust valves
โœ… Assembled with BTR .660" Platinum valve springs
โœ… 6-bolt castings with a thick .750" deck
โœ… Compatible with standard-style LS1 pedestal rockers

Supplied assembled and sold as a PAIR.

In stock now - ready to go ๐Ÿ’ช

๐Ÿ›’ Shop online or visit us in-store.

๐Ÿ“ข WE'RE CLOSED THIS FRIDAY & SATURDAYWe'll be closed Friday 11th & Saturday 12th September while we head to Powercruise ...
07/09/2026

๐Ÿ“ข WE'RE CLOSED THIS FRIDAY & SATURDAY

We'll be closed Friday 11th & Saturday 12th September while we head to Powercruise #100 at Queensland Raceway! ๐Ÿ”ฅ๐Ÿ

Weโ€™ll have our trade stand set up at the event, so if youโ€™re heading out, make sure you come over and say hey! ๐Ÿ‘‹

๐Ÿ›’ Online orders will still be open as normal
๐ŸŒ Shop online at https://www.1320motorsports.com.au

See you there!

Why choose a Pulsar Turbo's Ball-Bearing Turbocharger? ๐ŸCompared with a traditional journal-bearing design, a ball-beari...
17/08/2026

Why choose a Pulsar Turbo's Ball-Bearing Turbocharger? ๐Ÿ

Compared with a traditional journal-bearing design, a ball-bearing CHRA can reduce friction and improve how quickly the turbo responds to changes in throttle.

The result:

โšก Faster spool response
โšก Improved transient response
โšก Strong performance across the rev range
โšก Built for demanding performance applications

Choosing the right turbo still depends on your engine, power target and intended use but bearing design can make a noticeable difference to how the combination responds.

Contact us to upgrade your turbo today ๐Ÿ’ช

๐ŸŒ ๏ธhttps://www.1320motorsports.com.au/
๐Ÿ“ Unit 8/94 Delta St, Geebung QLD 4034
๐Ÿ›’ Shop Online or In-Store: 8:30am - 5pm

Weโ€™re OPEN this Wednesday! ๐Ÿ”ฅWhile Brisbane takes a break for the Ekka Show Public Holiday, 1320 Motorsports will be open...
11/08/2026

Weโ€™re OPEN this Wednesday! ๐Ÿ”ฅ

While Brisbane takes a break for the Ekka Show Public Holiday, 1320 Motorsports will be open as normal this Wednesday!

Whether you need performance parts, something for the current build, or want to come in and have a chat about your setup, come see us!

๐Ÿ“ Unit 8/94 Delta St, Geebung QLD 4034
๐Ÿ›’ Shop Online or In-Store: 8:30am - 5pm

Mattyโ€™s new FG - V8EATA - out and about after a recent engine rebuild and TH400 upgrade! ๐Ÿ”ฅWe originally plumbed the car ...
10/08/2026

Mattyโ€™s new FG - V8EATA - out and about after a recent engine rebuild and TH400 upgrade! ๐Ÿ”ฅ

We originally plumbed the car a few years ago and helped out with the original build, so itโ€™s awesome to see it back together, out on the street and getting used like it should! ๐Ÿ’ช

Plenty more to come from this thing ๐Ÿ‘€๐Ÿ”ฅ

Thinking about upgrading your own car? Whether youโ€™re planning a complete build or just need help with the next stage, get in touch with the 1320 Motorsports team today weโ€™ll help you put together the right setup.

Address

Unit 8/94 Delta Street
Geebung, QLD
4034

Opening Hours

Monday 8:30am - 5pm
Tuesday 8:30am - 5pm
Wednesday 8:30am - 5pm
Thursday 8:30am - 5pm
Friday 8:30am - 5pm
Saturday 8:30am - 1pm

Alerts

Be the first to know and let us send you an email when 1320 Motorsports posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share