Gravelrash Bluetooth Audio

01/09/2026

Attention fellow XK XL XM XP Falcon enthusiasts.

Fellow early falcon fans listen up…
I have put together a pack for the XKLMP Falcon.

What do I get?

✅1x XKLMP dash speaker kit.
✅1x Gravelrash Bluetooth module with chrome button and bezel.
✅1x Gravelrash XKLMP reproduction radio delete plate (specify model)
✅3x Gravelrash XKLMP polished aluminium dash plug blanks to replace those broken brittle plastic plugs.

Available extra is the BRAKE FAIL LED and the AUTOMATIC CHOKE dash plugs.

How to order?

Fellow early falcon fans listen up… I have put together a pack for the XKLMP Falcon. What do I get? 1x XKLMP dash speaker kit. 1x Gravelrash Bluetooth module with chrome button and bezel. 1x Gravelrash XKLMP reproduction radio delete plate (specify model) 3x Gravelrash XKLMP polished al

28/08/2026

Always love getting pics from customers along with a message along the lines of “bloody awesome piece of kit!”

Pictured here is my Gravelrash Powerglide gear shift position sensor.

Click the link⬇️
https://www.gravelrashbluetoothaudio.com.au/online-store/p/gm-powerglide-linear-sensor-kit

13/08/2026

XD XE Falcon side of dash speakers.
Replace those crackling old paper cone 10w gems with some modern speaker technology.

4x6” 3 way coaxial speakers.
200w peak power handling.
93db sensitivity.
Polypropylene cone and rubber suspension ring.
Shallow magnet depth for clearance.
Lower tweeter height for grille cover clearance.
Direct fit.
No drilling.
No cutting.

https://www.gravelrashbluetoothaudio.com.au/online-store/p/xd-xe-falcon-side-dash-speaker-kit

13/08/2026

Come along and support the Emerald Car Club.
Always a great day..good enough for me to drive the 7 hours and bring a few mates with me.

I’ll be there with a car but not with a Trade stand, however if you need something. Click the link below and I’ll bring it up with me.

https://www.gravelrashbluetoothaudio.com.au/

12/08/2026

Barra dowel kit.

Rebuilding a Barra engine and wanting to replace the dowels as well??
Bad news is the head dowels, timing cover dowels nor the cam cap dowels come in rebuild kits…I found out the hard way and had my own made instead. Only better than OEM.

✅ Barra cylinder head dowel kit.
Cylinder head locating dowels for the Ford Barra, SOHC and the Intech engines.
There’s nothing more frustrating than misplacing the cylinder head dowels or to find out it didn’t come in the rebuild kit…right at the crucial time of putting the head gasket on. Get in early and be prepared.
So I had my own designed and made.
Made from wear resistant, very hard wearing GCR15 bearing steel.
Bearing steel undergoes full quenching for high hardness.
Overkill I know, but anything I do has to be better than OEM.
Sold in Pairs.

✅ Ford Barra BA/FGX Front Timing Cover Dowels (Pair)
Replace those rusty mild steel factory dowels with 304 stainless steel.

✅Barra camshaft cap dowels.
Ever crushed and deformed those pesky little dowels underneath the cam caps?
I have had them CNC machined out of 304 stainless steel.
Much stronger than the OEM versions.
(Pack of 28 dowels)

COMPLETE DOWEL KIT
*28 cam cap dowels
*2 cylinder head-block dowels
*2 timing cover dowels

$312AUD delivered anywhere in Australia.

11/08/2026

The VL OEM+ front dash speakers are back but in limited numbers. 6 pairs only available this round.

VL Commodore owners rejoice…
Anyone who has tried to replace the 4” speakers in the dash of a VL Commodore will know the pain. Any other normal aftermarket 4” speaker is too deep in the magnet and contacts the metal body or too high in the tweeter and contacts the dash speaker cover.

The search is over..
Finally have I been able to find a quality speaker that fits straight into the factory mounting position that doesn’t contact the body nor touch the speaker dash cover.
Not only that but I have also managed to find a patch harness that connects the speaker to the factory harness.
Speakers are 4ohm 50w with a polypropylene cone and rubber suspension ring.
Light years ahead of your original old 20w paper cone speakers designed for AM radios..

Price and where do I purchase? Follow the link below to the online store.
https://www.gravelrashbluetoothaudio.com.au/online-store/p/universal-speakers-kits-nfsy3-x46le-xfe8r-c96e6-rejlm-hgd5c-dbebe-ezank-r5zhz-6cp2c?rq=VL

11/08/2026

Out in tomorrow’s post.

1x HKWB Holden speaker kit.
Buxton NSW

1x XRTWY Falcon speaker kit.
Ballina NSW

1x chrome latching switch.
Brunswick West Vic

1x Early falcon BRAKE FAIL LED dash plug.
Smiths Creek NSW

08/08/2026

Not often I head down to the shed on a weekend to pack “work” orders, normally that’s a weekday task.
However I got a message last night from a customer who owns 2x EH Holdens in the USA but is in Oz at the moment for a short visit. Trouble is he flys out end of next week….🤔 no worries I’ll assemble them on Sunday and send Express to Melbourne on Monday. 🤞

2x FBFCFEEKEJEH Holden speaker kits.
Melbourne Aus - Douglas Massachusetts USA

1x HDHR Holden speaker kit.
Today WA