All Gen Engines

All Gen Engines Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from All Gen Engines, Automotive, aircraft & boat, Croydon.

Located in Croydon Victoria 🇦🇺

Specialising in perfomance V8 and inline 6 engines

-Blown to basic & Resto to race✅
-Changeover CNC LS heads (Blackwells)✅
-Performance engine parts✅
-On-site cam bearings installation✅
-LS engine thread repairs✅

The power of ultrasonic clean 👌🏼This week we had a set of 6.0 LS rockers in for a clean, supply and fitment of CHE trunn...
14/05/2026

The power of ultrasonic clean 👌🏼

This week we had a set of 6.0 LS rockers in for a clean, supply and fitment of CHE trunnion kit 🔥🔥

🔥Savy Oil Systems dry sump soon to be fitted to a blown 388ci LS making a comeback to the burnout scene after a couple y...
06/05/2026

🔥Savy Oil Systems dry sump soon to be fitted to a blown 388ci LS making a comeback to the burnout scene after a couple years 🤫

Such a stunning product! 😍 🇦🇺

🔥COUMVA🔥 Coumva automotiveWe recently completed this Fresh cast 366ci LS for Michael’s VY Maloo Starting with a Precisio...
03/05/2026

🔥COUMVA🔥 Coumva automotive

We recently completed this Fresh cast 366ci LS for Michael’s VY Maloo

Starting with a Precision international LY6 long engine, we replaced the rotating assembly with Callies crankshaft/rods and a set CP pistons.
Blackwell Race Engines CNC/reco cylinder heads and a Crow Cams Australia Pty Ltd camshaft with all the necessary supporting mods and ARP hardware throughout. 👌🏼

Soon to be tuned by Stout Automotive, excited to see the outcome 🔥

6/71 363ci Dart Machinery SBF in mock assembly stages to check all clearances and fitments 🔥
21/04/2026

6/71 363ci Dart Machinery SBF in mock assembly stages to check all clearances and fitments 🔥

Congratulations to COUMVA on taking out 1st place at Rubber riot at The bend yesterday 🔥Amazing work as always mate 👊🏻
21/03/2026

Congratulations to COUMVA on taking out 1st place at Rubber riot at The bend yesterday 🔥

Amazing work as always mate 👊🏻

We recently gave Cade’s L96 LS from his GU patrol for a makeover and some upgrades. 🔥🔥Starting off giving the whole engi...
17/03/2026

We recently gave Cade’s L96 LS from his GU patrol for a makeover and some upgrades. 🔥🔥

Starting off giving the whole engine a degreaser and high pressure clean removing all the mud and grime, We dissembled it down to a short engine and fitted the following.

- Full cam kit with LSXceleration torque camshaft ✅
- CHE Precision Inc. trunnion kit ✅
- Removal of VVT components ✅
- Blackwell Race Engines Reco/CNC ported heads
- Remove and refit new cam bearings ✅
- Ultra sonic and hot wash clean all engine covers ✅
- Prime engine with engine oil ✅
- Replacement water pump, leads and spark plugs ✅
- Machine flywheel ✅

👊🏻

12/03/2026

HAVSUM was set to kill mode at Tyre massacre on the weekend🔥🔥

Great start but unfortunately the transmission let go mid skid!

Awesome effort mate 👊🏻

Shout out to Dropaset Media for the footage 👌🏼

Havsum Motorsport

Fresh set of raw billet valve covers for our customer Jack’s LS engine 🔥 These look absolutely stunning!
10/03/2026

Fresh set of raw billet valve covers for our customer Jack’s LS engine 🔥

These look absolutely stunning!




Well done to our good friend and customer COUMVA on placing 3rd today at Tyre massacre at Winton 👊🏻👊🏻Awesome effort 🔥🔥Co...
07/03/2026

Well done to our good friend and customer COUMVA on placing 3rd today at Tyre massacre at Winton 👊🏻👊🏻

Awesome effort 🔥🔥

Coumva automotive

Goodluck too all of our valued customers at Winton today for Tyre massacre 🔥🔥COUMVA - N/A 6.0 LILSUS - N/A 5.7 HAVSUM - ...
06/03/2026

Goodluck too all of our valued customers at Winton today for Tyre massacre 🔥🔥

COUMVA - N/A 6.0
LILSUS - N/A 5.7
HAVSUM - Blown 5.7
SKDNLS - N/A 5.7
UPNSMK - N/A 6.0 we recently supplied CNC heads on
SYCO8 - N/A 5.7 we recently supplied CNC heads on

👊🏻👊🏻




Address

Croydon, VIC
CROYDON

Opening Hours

Monday 8am - 6pm
Tuesday 8am - 6pm
Wednesday 8am - 6pm
Thursday 8am - 6pm
Friday 8am - 6pm
Saturday 8am - 12am

Website

Alerts

Be the first to know and let us send you an email when All Gen Engines posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to All Gen Engines:

Shortcuts

Share

Category