Dowell’s Laser Cleaning

Call Directions

Dowell’s Laser Cleaning Dowell's Laser Cleaning provides professional mobile laser cleaning throughout Victoria.

We remove rust, paint, grease and contaminants using precision laser technologys for a cleaner, safer process with minimal waste and no abrasive blasting.

30/06/2026

Continuous Wave (CW) laser cleaning system.

The aim was to evaluate how effectively the laser could remove mould, algae and organic staining from concrete without the use of chemicals or high-pressure water.
The cleaned sections clearly show the laser's ability to strip away years of surface contamination, revealing the original concrete beneath.
🔹 No chemicals used
🔹 No abrasive blasting media
🔹 Precision cleaning only where required
🔹 Ideal for testing different cleaning speeds and settings
These photos show test sections only—the entire driveway has not been cleaned. The contrasting areas highlight the difference between the untreated surface and the laser-cleaned sections.
We're continuing to develop laser cleaning techniques across a wide range of materials and applications, with every test helping refine the process.

What do you think? Would you like to see a full driveway cleaned using laser technology?

📩 Get in touch if you'd like to learn more about laser cleaning and its potential applications.

Continuous Wave (CW) laser cleaning system.The aim was to evaluate how effectively the laser could remove mould, algae a...
25/06/2026

Continuous Wave (CW) laser cleaning system.

The aim was to evaluate how effectively the laser could remove mould, algae and organic staining from concrete without the use of chemicals or high-pressure water.
The cleaned sections clearly show the laser's ability to strip away years of surface contamination, revealing the original concrete beneath.
🔹 No chemicals used
🔹 No abrasive blasting media
🔹 Precision cleaning only where required
🔹 Ideal for testing different cleaning speeds and settings
These photos show test sections only—the entire driveway has not been cleaned. The contrasting areas highlight the difference between the untreated surface and the laser-cleaned sections.
We're continuing to develop laser cleaning techniques across a wide range of materials and applications, with every test helping refine the process.

What do you think? Would you like to see a full driveway cleaned using laser technology?

📩 Get in touch if you'd like to learn more about laser cleaning and its potential applications.

19/05/2026

Over the weekend I put some time into tuning a setting for stripping paint from fibreglass body work without damaging the gel coat or fibreglass part .
I was stripping a fibreglass hood scoop which had black paint and clear coat .
The scoop had a damaged spot before I began the laser stripping process but no further damage was caused or uncovered on the top surface.
The pulse laser removed all paint leaving the surface ready for a sand then and prime .












Laser stripping Fibreglass body kit Over the weekend I put some time into tuning a setting for stripping paint from fibr...
19/05/2026

Laser stripping Fibreglass body kit

Over the weekend I put some time into tuning a setting for stripping paint from fibreglass body work without damaging the gel coat or fibreglass part .
I was stripping a fibreglass hood scoop which had black paint and clear coat .
The scoop had a damaged spot before I began the laser stripping process but no further damage was caused or uncovered on the top surface.
The pulse laser removed all paint leaving the surface ready for a sand then and prime .












06/04/2026

This shows the cleaning power of a pulse laser cleaner on oil, rust and paint .






Vn Commodore starter refurbished Today was cleaning of a vn commodore’s automatic starter motor.This starter covered in ...
06/04/2026

Vn Commodore starter refurbished

Today was cleaning of a vn commodore’s automatic starter motor.
This starter covered in light surface rust and oil and some original paint .
The only cleaning done was with the light
From my pulse laser which stripped it all back in the matter of minutes .

Laser machines are efficient at removing grease and oil from the surface by superheating it turning it to dust thus removing contamination making the substrate clean and contaminant free ready for paint or powder coating .

















27/03/2026

Cleaning of intercoolers and radiators can be tricky, even a high pressure washer can bend the small fins resulting in a fully damaged core .
Even though this core originally had some bent core fins due to its many years of operation in the front of a vehicle cleaning with a laser demonstrates no additional damage occurs .
Laser cleaning doesn’t use pressure to clean rather intense focus of light .
The sound of air you hear in the video is actually air that is blown over the lens to keep it cool and clean while in operation.
Laser cleaning is a great way to clean such surfaces where two type of substrates meet one solid and one fragile .

















Inter-cooler cleaning The benefit of cleaning with light is the ability to clean components that have rugged constructio...
27/03/2026

Inter-cooler cleaning

The benefit of cleaning with light is the ability to clean components that have rugged construction with more delicate infills like intercoolers and radiators .
Pulse lasers have a greater flexibility allowing a more Gental cleaning approach on thin aluminium surface like cooling fins but powerful enough to remove the paint and grim coatings covering there surfaces.
It is even possible to clean some of the internal surfaces .

The light energy strips away the old paint oil and grim leaving a clean undamaged surface ready for painting, if required.








Brake calliper cleaning Cleaning of car parts such as brake callipers can be done fully assembled allowing you to keep t...
27/03/2026

Brake calliper cleaning

Cleaning of car parts such as brake callipers can be done fully assembled allowing you to keep the unit internally dust and contaminate free meaning it can be externally cleaned and painted without the need of removing brake piston, seals and even the brake line can remain saving time and effort if they don’t require replacement .

Laser light doesn’t harm the rubber components with brief exposure such as removing surface rust around them rather it cleans the rubber surface also .













Address

17 McLeod Street
Colac, VIC
3250

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

+61437073828

Website

Alerts

Be the first to know and let us send you an email when Dowell’s Laser Cleaning posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category