Classic & Custom Exhaust Factory

09/06/2026

Beautiful looking hg Monaro was in to do a twin 2.5 mandrel bent custom exhaust , we put some stainless mufflers in the middle and some small resonators in the back and finished with twin tips in the theme but a bit tougher looking , thanks to mark for bringing it in 👍

27/05/2026

An original Shelby mustang graced us with its presence for a 2,25 stainless exhaust , will be a stunning car when it’s all done , full credit to rob from concorde and John that are building it , thanks to Les for bringing it in 👍👍

22/05/2026

Very cool looking fast n furious style Jensen interceptor was in to make cats and an exhaust , we fitted some 200 cell round ones up front with pre and post cat sensors as it’s got an ls3 in it 💪👍, used oval pipe in the centre so it all didn’t hang too low then put two mufflers in the centre , ran under the leaf springs( the original exhausts run under the tank , weird design and can only heat up the fuel? ) , then out to another two mufflers at the back, hard one to do as there is no room at the back but we got it all in there in the end , thanks to Adam from Chopwood for bringing it in

22/05/2026

Had Rudis car in to fix another Harrop disaster , got his mufflers all working again and he’s ready for the road 👍

13/05/2026

# 63 Buick riviera
#401 nailhead

12/05/2026

Beautiful looking 63 Buick riviera was in as the old exhaust was hitting everywhere and it was way too loud , we fabricated a full 21/4 twin exhaust from the manifolds back with two resonators and two mufflers , now it is off to cruise the highways low and slow as it was meant to , thanks to Tim with an o for bringing it over , 👍

06/05/2026

06/05/2026

Seat cupra for mentor was in for an xforce cat back with smart box , thanks to Tom for bringing it over

22/04/2026

Nice ol Pontiac firebird was in to do an exhaust , new headers were in so we made a twin 2.5 into 21/4 and hid the tips at the back, thanks to Milat for bringing it over