Red Dog Restorations-Vapour Blasting

Red Dog Restorations-Vapour Blasting Vapour blasting service. The ultimate process to restore the surface of your Alloy parts to their original finish or better. Pick ups can be arranged

Located in the Albury Wodonga region.

These old rims have been vapour blasted for a clean-but used look and will be fitted back on the old Bultaco they came o...
14/03/2024

These old rims have been vapour blasted for a clean-but used look and will be fitted back on the old Bultaco they came off, to be used as a display piece.

XR 250 head and barrel given a dull satin finish ready for a top end rebuild without standing out too much.
13/03/2024

XR 250 head and barrel given a dull satin finish ready for a top end rebuild without standing out too much.

Another set of W35 option Valiant rims-corrosion removed and vapour blasted. Last two photos from customer showing rims...
11/12/2023

Another set of W35 option Valiant rims-corrosion removed and vapour blasted. Last two photos from customer showing rims after machining(photos don’t look as good as in person)

These Honda forks look much more presentable after removing corrosion and deep scratches. I then put an even textured f...
10/12/2023

These Honda forks look much more presentable after removing corrosion and deep scratches. I then put an even textured finish back into the surface and finished off with some vapour blasting to give them a nice, easy to clean fresh new look.

These 1957 Matchless motorcycle engine parts came up a treat in our Vixen Aquablast machine. The customer wanted them ...
26/09/2023

These 1957 Matchless motorcycle engine parts came up a treat in our Vixen Aquablast machine. The customer wanted them shiny but not too over the top.

Vapour blasting completed on a couple of old Holden V8 manifolds ready for refitting
15/09/2023

Vapour blasting completed on a couple of old Holden V8 manifolds ready for refitting

Harley Davidson rim vapour blasted in preparation for machining/milling of the non-textured outer sections of the rim.
19/06/2023

Harley Davidson rim vapour blasted in preparation for machining/milling of the non-textured outer sections of the rim.

I haven’t posted for a while(a bit slack with the camera). Here are some ford brake parts cleaned up for a customer’s re...
19/06/2023

I haven’t posted for a while(a bit slack with the camera). Here are some ford brake parts cleaned up for a customer’s rebuild

Are you getting close to reassembling your project but your bolt-on parts just don't look good at all? Red Dog Restorat...
10/01/2023

Are you getting close to reassembling your project but your bolt-on parts just don't look good at all? Red Dog Restorations can help you out. Check out these Ford engine brackets freshly Vapour blasted by Jason at Red Dog Restorations . These brackets will not look out of place being bolted to a freshly rebuilt/painted engine.
If you need any parts tidied up send us a message or give Jason a call 0424353366

Toyota Land Cruiser 80 series rocker cover came in for a freshen up whilst off for a service. We did a more subtle, less...
16/09/2022

Toyota Land Cruiser 80 series rocker cover came in for a freshen up whilst off for a service. We did a more subtle, less shinier finish with this one.

Address

555 Lockharts Gap Road
Charleroi, VIC
3695

Telephone

+61424353366

Website

Alerts

Be the first to know and let us send you an email when Red Dog Restorations-Vapour Blasting posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Red Dog Restorations-Vapour Blasting:

Shortcuts

Share

Category