Mr Module Automotive Electrical

08/03/2026

Ford BA-BF Falcon instrument cluster programming now available.
- Odometer programming,
- Fuel gauge calibration (sedan/ute/wagon, petrol or LPG),
- Brake system config (no ABS, ABS, TC, DSC),
- Enable police mode (with digital speedo),
+ more

All done via OBD (your cluster will not be dismantled, so there is no risk of damage)

https://mrmodule.com.au/product/ford-falcon-babf-cluster-programming/

28/12/2025

Now Available - Ford Falcon FG Mk1 Instrument Cluster Programming

• Cluster cloning – create a true bolt-in replacement if your original cluster has failed
• Custom boot images – personalize your cluster with your own startup logo
• Fuel gauge calibration – run a sedan LPG cluster accurately in a petrol ute
• ABS brake system configuration
• FPV gauge options
+ more

https://mrmodule.com.au/product/falcon-fg-cluster-programming/

22/07/2025

Mr Module now offers proper PATS anti-theft removal for BA and BF Falcon PCMs — without triggering the audio “CODE” error on the ICC or the red hand warning on the instrument cluster.

After re-flashing, the engine will start regardless of the BEM or transponder key status. If you're using the original PCM (same serial), the ICC and radio will function normally, and no warning lights will appear. If you're swapping PCMs, audio security can still be re-initialized using a scan tool or Forscan — just like with factory PATS. This is possible because our solution patches the PCM's operating code, not just PATS flags.

Send your PCM in for a 1-business-day turnaround, with return shipping via Express Post. This is ideal if you've had a BEM or security failure and prefer to permanently eliminate the problem — without chasing replacement parts or needing a second ignition key.

An equivalent solution for FG Series 1 Falcons is in development and coming soon.

https://mrmodule.com.au/product/ford-ba-fg-falcon-pats/

31/03/2025

Traction control warning removed from a VY commodore cluster for a base model ute without ABS.
This isn't a programmable option using Holden dealer software or even the leaked OEM cluster manufacturer software, but it can be done.

05/10/2024

Fitting a Haltech or aftermarket ECU to your VT VX VY or VZ Holden Commodore?
Want to keep the factory dash cluster functions, coolant temperature gauge, AC control?
Very limited stock of the new VT-VZ ALDL PCM Simulator now available.
https://mrmodule.com.au/product/holden-pcm-simulator/

10/03/2024

Unleash the full potential of your next-gen Ranger. Say hello to high-flowing aftermarket exhaust systems, and goodbye to the engine light and P2455 DTC.
https://mrmodule.com.au/product/ranger-v6-exhaust-pressure-corrector/

11/09/2023

Landcruiser 70 Series V8 1VD-FTV DPF Delete Module now available.
DIY fitment - No tune required - Remove and return to standard at any time.
https://mrmodule.com.au/?product=lc70-dpf-module

22/03/2023

New module now available - Shift Light Controller. This is basically an RPM triggered switch, that accepts all different types of tacho/RPM signals and with a configurable switching RPM. Use it to control a shift light, or for anything else you need switched based on RPM.

https://mrmodule.com.au/?product=shift_light_controller

02/11/2022

Why has the page name changed? There's now more to offer! Not only are there N80 Hilux DPF delete modules, I've also started producing an NP300 Navara DPF delete module. Also, to incorporate other products I’ve been selling for a number of years on other platforms, I decided to bundle the whole lot together under a single name: Mr Module. I specialise in plug-and-play or easy to fit solutions to automotive electronics problems, as well offer repair services for faulty parts. Check out the new website here: www.mrmodule.com.au to see what else I offer. Hopefully there will be even more in the future!

Welcome Visit the Shop to view the innovative range of products. About Mr Module offers a range of plug-and-play or easy to fit solutions to automotive electrical problems, as well as repair services for faulty parts. I have been designing, testing, assembling and selling these since 2018 – both i...

25/08/2022

Hilux N80 DPF Delete modules on the way to Meredith Metalworks to be sold as a kit with their 3" stainless delete pipes. Check them out if your looking for a complete exhaust system as well

20/07/2022

Another batch of DPF delete modules in production. 100% developed and assembled here in Australia. Compatible with all 2015+ N80 Hilux 1GD and 2GD engines. In stock and ready to ship now