Exhausted Fabrication

Exhausted Fabrication Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Exhausted Fabrication, Automotive Customization Shop, Sheree Court, Buccan.

We offer services such as
Custom Extractors
Turbo Manifolds
Intercoolers
Exhaust Systems and Modifications
Tubs and Chassis
Diff and Chassis Fabrication
Vehicle Modifications
Rust Repairs....

A HK Bonnet undergoing a transformation with a metal reverse cowl fitted for a build we have at present! Still some more...
12/06/2026

A HK Bonnet undergoing a transformation with a metal reverse cowl fitted for a build we have at present!

Still some more shaping to go but coming along nicely.



Rob’s LJ headed home last week after a lengthy stay and a lengthy list of work!! It Has definitely transformed over the...
09/06/2026

Rob’s LJ headed home last week after a lengthy stay and a lengthy list of work!! It Has definitely transformed over the past 12 months after being untouched for 20+ years. We performed a heap of fab and body work and cannot wait to see it painted and running the streets again!!

Matt’s car has had some love this week with some new large tubs in his VK Commodore. Next week a new floor and panels in...
05/06/2026

Matt’s car has had some love this week with some new large tubs in his VK Commodore. Next week a new floor and panels in the boot area while we wait for some machining on his new floater hubs!!



We had this old FUTURA in recently for a new system. We popped on a 409 stainless 2 1/4” pressbent system from the mani...
04/06/2026

We had this old FUTURA in recently for a new system. We popped on a 409 stainless 2 1/4” pressbent system from the manifold. The pre-requisite was to give her a note and that we did!

She was a tidy old girl built for cruising!



We have had this RX3 in recently for a new diff set up. This car is making its way back from track duties to street dut...
01/06/2026

We have had this RX3 in recently for a new diff set up. This car is making its way back from track duties to street duties!

We performed the following:

* Fabricated a new diff housing to suit the customer’s supplied wheels
* cut off and re tig welded the existing brackets to the new housing
* turned down his old floater hubs
* supplied and fitted new custom 35spl custom axles
* reassembled diff and brakes
* made new brake lines
* refit to vehicle and adjusted to height!




Rob’s LJ Torana has been getting a load of love the past few weeks with a list of the following: * Floors all stripped, ...
25/05/2026

Rob’s LJ Torana has been getting a load of love the past few weeks with a list of the following:

* Floors all stripped, sanded and painted.
* 6 Point Chromoly roll cage tig welded and fitted
* modified front valance to accommodate the intercooler
* Guards and nosecone all welded back on
* doors gapped and adjusted hinges and rewelded
* Body all sanded and epoxied
* fabricated new driveline tunnel

Everyday getting closer to head home for a while!!

We had Shane’s super tidy VL Wagon in recently for a set twin 3” to single 3.5” tailpipe. We cleaned up the bracketry an...
17/05/2026

We had Shane’s super tidy VL Wagon in recently for a set twin 3” to single 3.5” tailpipe. We cleaned up the bracketry and tidied up the from of the exhaust and gave it a fresh lick of paint.



We had Dave’s LX Torana Hatch in last week for a twin 3” mandrel system in 409 stainless with some Growl mufflers an X-p...
11/05/2026

We had Dave’s LX Torana Hatch in last week for a twin 3” mandrel system in 409 stainless with some Growl mufflers an X-pipe and some under axle tail pipes.



We had Travis’ Skyline in for the following list of work this week:*Mounted a new intercooler*Welded and fabricated inte...
09/05/2026

We had Travis’ Skyline in for the following list of work this week:

*Mounted a new intercooler

*Welded and fabricated intercooler piping to suit his new intake and turbo set up.

* Welded a new cast elbow on his turbo.

* Relocated power steering oil canister

* welded up new dump pipe and screamer pipe

* Heat wrapped dump pipe



We had this HQ Tonner in recently for a new dual 3” mandrel system with 100 cell cats, X-pipe, a pair of Growl Mufflers ...
07/05/2026

We had this HQ Tonner in recently for a new dual 3” mandrel system with 100 cell cats, X-pipe, a pair of Growl Mufflers and Resonators. All finished off in Black Ceramic Heat Paint.

Address

Sheree Court
Buccan, QLD
4207

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+61401584884

Website

Alerts

Be the first to know and let us send you an email when Exhausted Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Exhausted Fabrication:

Shortcuts

Share

Category