Empire Wiring & Automotive

11/10/2026

❄️ IS YOUR CAR’S AIR CON READY FOR THE QUEENSLAND HEAT? ☀️🥵

🔥 OCTOBER SPECIAL — A/C RE-GAS FROM JUST $198 INC. GST! 🔥

With summer fast approaching, now is the perfect time to get your vehicle’s air conditioning running at its best!

At Empire Wiring & Automotive, we do more than just re-gas your A/C. We offer complete automotive air-conditioning repairs, from minor leaks to major component replacements.

🔧 OUR SERVICES INCLUDE:

✅ A/C re-gassing from $198 inc. GST
✅ A/C fault finding & diagnosis
✅ Custom A/C hoses & hose replacements
✅ Condenser replacements
✅ Evaporator replacements
✅ Compressor replacements
✅ Refrigerant leak detection & repairs
✅ A/C electrical fault diagnosis
✅ Complete air-conditioning system repairs

💨 Whether your A/C isn’t blowing cold, has stopped working completely, or needs a full system overhaul, we’ve got you covered!

💥 DON’T WAIT UNTIL THE SUMMER HEAT HITS!

Get your vehicle’s air conditioning sorted before those scorching Queensland days arrive.

📲 MESSAGE US TODAY TO BOOK!

📍 Empire Wiring & Automotive

❄️ A/C RE-GAS FROM $198 INC. GST — OCTOBER SPECIAL!

Pricing starts from $198 inc. GST for eligible vehicles. Additional repairs and parts are quoted separately.

05/10/2026

Faded and failing headlights are not only a hazard on the road but also a roadworthy failure. This customer brought us some aftermarket headlights to replace the broken old pair and we decided to give them a new lease of life with a fresh buff and re clear to finish it off ! Need any auto electrical or mechanical repairs? Call us today or email [email protected] ph:0406508631

23/09/2026

76 series landcruiser straight through exhaust fitted 😎 How a landcruiser should sound 👌👌👌

19/09/2026

Simple Clean and Effective. Our team carried out a battery upgrade on this 21 model caravan concepts van, taking out the tired and heavy 100ah AGM and fitting 2x120ah lithium battery’s with new trays and retired the old plastic battery box. We also added an external solar input in the side wired straight into the bmpro battery management unit. Need something similar ? Contact our team today for a quote. [email protected] or 0406508631. 4WD Supacentre Empire Wiring & Automotive Adventure Kings

14/08/2026

ozrota capella 13B Capella came to us with the original CDI ignition system breaking down under load — so it was time for an upgrade!

We supplied and installed a set of Haltech IGN-1A coils, wired them in and tucked everything neatly away under the intake manifold for a clean look.

Inside, we added a Haltech 8-button CAN keypad, housed in a custom 3D-printed bracket incorporating a shift light into the factory radio position. We also fabricated a bracket for the ECU to be mounted to giving it a secure and tidy home.

And the result? 👀

The Capella recently laid down a 10.58 @ 135mph — through a H-pattern gearbox. 💪💪

04/08/2026

It’s not always big horse power and jdm cars around here! We’ve had this brand new super duty come to us after already having the dual battery install done elsewhere. we fitted the following emergency systems including emergency lights on the roof,sirens,uhf,Anderson plug connections on tray and rewired the Center roof console switches to be constant power via the second battery! Like always clean and tidy and ready for years of service. Need something similar? Contact us today ! [email protected] or 0406508631

02/08/2026

02/08/2026

Swipe👉
Spike Green beautiful s13 from the archives
In-house built engine and link ecu package
Motor built by Empire Wiring & Automotive
Wired by Empire Wiring & Automotive
Tuning by MRPS Automotive 🔧🔩
Paint and panel by Spike Green
Running a very stout 560hp on e85 this setup has potential to see high 700s with a new fuel system but with already 20 thousand kms on this engine it’s been hassle free motoring with multi-able track days under its belt.. Does your project need some love ? Or ready for a full transformation ? Contact us today [email protected]

13/05/2026

Here’s abit of a tech tip for those playing at home or even in a professional workshop. As we all know removing AN fittings multiable times can eventually lead to a leaking fitting. In this case it was leaking on a welded fitting. For the customer this can be a costly and timely repair having to remove / cut and weld a new fitting on when there’s nothing really wrong with the fitting it’s just the sealing face is abit worn. Let me introduce you to a product we use called flaretite( originally designed for the JIC hydraulic fitting industry) it also shares a 37 degree taper like a AN fitting just simply remove the fitting and install it onto the male fitting end and screw it back on! It’s that simple!

Drop down below was this helpful? ⬇️⬇️